Hi Peter Karlsson wrote: The VIA CN400 contains the Unichrome Pro "Group A" which, 3D-wise, should be compatible with the Unichrome, so once the DDX sets up the chip correctly, 3D should work right out of the box (at least as good as for the Unichrome).On Mon, 3 Jan 2005, Alan Cox wrote:It depends what your interests are. If you want to master 3D graphics driver writing and have six months to spare you can have great fun. If you just want a VIA EPIA with working 3D support then the newer chipset (VIA CLE266) DRI is very close to working and you might want to just upgrade hardware and join that effort ?Just out of curiousity: Is there any support for the VIA CN400 (ongoing/planned)? The DDX doesn't support the Unichrome Pro fully yet because of lack of HW samples. Specifically lacking is dotclock setup, 2D accel in some cases, Xv and XvMC. Since all developers at unichrome.sf.net are unpaid freetimers, that support is probably not going to happen until VIA or another commercial user donates a board or two. /Thomas Best regards Peter K |
- Re: Getting started =?ISO-8859-1?Q?Thomas_Hellstr=F6m?=
- Re: Getting started Peter Karlsson
- Re: Getting started Alan Hourihane
- Re: Getting started Alan Hourihane
- Re: Getting started Alan Cox
- Re: Getting started Alan Hourihane
- Re: Getting started Alan Hourihane
- Re: Getting started Adam Jackson
- Re: Getting started Sjoerd Langkemper