Am Dienstag, den 18.01.2005, 20:04 -0800 schrieb Mark Cass: > savage driver team, > > when i run glxgears a window appears but nothing is displayed. the > shell from which glxgears was run displays the usual frames per second > and no other information. i checked glxinfo and dri is enabled. also > found nothing unusual in the X log file. i have two options set > "APGMode" to "4" and "AGPSize" to "32". i tried without using these > options with the same result. the system is using the savage twister > with 32 MB and AGP 4X. it is detected and reported as such in the X > log file. the X server is running at 1280x1024 and using 16 bit color.
I had such a problem once too with a Savage4 AGP. A reboot fixed it. I never found out what was wrong. :-/ > > what is strange is that this same code (no recompile, code was > compiled on a intel based machine) works on another system i have. > this other system is an AMD Athlon processor using a 32MB AGP 4X > savage 4 video card. glxgears runs properly (i see gears spinning). i > use the same settings for the x server and savage options as mentioned > above. i have had dri working correctly in the past on the twister but > it was way back in march of 2004. at that time it worked fine. Can you track down at which change it broke exactly (using cvs update -D<date>)? Mailing list archives of dri-patches and mesa-cvs may be helpful. > > the code i am using is from an earlier version (before the kernel 2.6, > X org change over). i have to use the old driver that works for the > linux 2.4 kernel (no choice, blame it on management). i think the > version dates back to about May of 2004. I can't offer any support for this old stuff. Sorry. > > if you have any ideas please let me know. > > thanks in advance, > mark > > ps. > > some time ago i worked out the details for texture compression. i did > not go as far as to include the 'on the fly' compression stuff. i have > tested the loading of compressed textures and sub textures and both > perform as expected. if you would like to include this in your latest > stuff just let me know and i will post the source code files. all the > files are commented quite clearly concerning the changes made. Definitely. You can send it to me personally or to the dri-devel list, whatever you prefer. I might integrate it into the current driver one of the next weekends. Regards, Felix -- | Felix Kühling <[EMAIL PROTECTED]> http://fxk.de.vu | | PGP Fingerprint: 6A3C 9566 5B30 DDED 73C3 B152 151C 5CC1 D888 E595 | ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel