On 6/18/05, Lorenzo Colitti <[EMAIL PROTECTED]> wrote: > Jon Smirl wrote: > >>When I first boot it's fine, but when the laptop comes back from S3, > >>even if everything else works, the serial console just prints a couple > >>of characters of garbage and then dies. :( > > > > The serial line is probably coming back at the default baud rate and > > you were setting it higher when you were testing it. > > That might be, but this happened both when booting with > "console=ttyS0,115200n8" and with "console=ttyS0", which I assumed > should set it to the default rate. > > I altro tried to see if writing to the port would get it working again, > e.g. as reported here: > > http://www.ussg.iu.edu/hypermail/linux/kernel/0502.0/1030.html > > but that didn't work either.
You do get the nice serial console printout at boot right, it's only not working on resume? Ben said he would be back this week. He is the expert on this code. > > > Cheers, > Lorenzo > -- Jon Smirl [EMAIL PROTECTED] ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
