http://bugzilla.kernel.org/show_bug.cgi?id=6082
------- Additional Comments From [EMAIL PROTECTED] 2006-02-18 01:50 ------- Hi, I'm having a similar issue, even with latest drm, except my problem is with a CDRW device. It gets disconnected each time a 3d program runs. I've got Slackware current, kernel 2.6.15.4, XOrg 6.9 (both self-compiled), latest drm and mesa. Hardware Environment: Athlon XP 2500+, 1 GB RAM video card: ATI Radeon R350 lspci output: 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) 00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 01:0b.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02) 01:0c.0 RAID bus controller: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, embedded seems (rev 10) 01:0d.0 Mass storage controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) 03:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] 03:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) My /proc/interrupts with drm loaded: CPU0 0: 74255552 XT-PIC timer 1: 110676 XT-PIC i8042 2: 0 XT-PIC cascade 5: 7360005 XT-PIC libata, ohci_hcd:usb2, [EMAIL PROTECTED]:0000:03:00.0 7: 3 XT-PIC parport0 8: 0 XT-PIC rtc 9: 323178 XT-PIC acpi, ehci_hcd:usb1, eth0, NVidia nForce2 11: 15840418 XT-PIC ide2, ide3, ohci_hcd:usb3, eth1 12: 102 XT-PIC i8042 14: 223958 XT-PIC ide0 15: 37171 XT-PIC ide1 NMI: 0 ERR: 0 If I mount a cdrom, then start a 3d program, the CDRW read light starts flashing. dmesg output (repeated a couple of times): hda: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error } hda: status error: error=0x7f { IllegalLengthIndication EndOfMedia AbortedCommand MediaChangeRequested LastFailedSense=0x07 } ide: failed opcode was: unknown hda: drive not ready for command hda: ATAPI reset complete hda: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error } hda: status error: error=0x7f { IllegalLengthIndication EndOfMedia AbortedCommand MediaChangeRequested LastFailedSense=0x07 } ide: failed opcode was: unknown hda: drive not ready for command hda: ATAPI reset complete hda: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error } hda: status error: error=0x7f { IllegalLengthIndication EndOfMedia AbortedCommand MediaChangeRequested LastFailedSense=0x07 } ide: failed opcode was: unknown hda: drive not ready for command and after it: ide: failed opcode was: unknown hda: drive not ready for command hda: drive not ready for command VFS: busy inodes on changed media. VFS: busy inodes on changed media. dmesg output when I exit the program and try to access the CDRW: hda: lost interrupt VFS: busy inodes on changed media. and after a couple of seconds, the CDRW starts working normally again, until the next time I activate a 3d program. ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel