http://bugzilla.kernel.org/show_bug.cgi?id=12920
Summary: savage: mmap2 of /dev/dri/card0 fails with EAGAIN since
2.6.29-rc6
Product: Drivers
Version: 2.5
KernelVersion: 2.6.29-rc6
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI)
AssignedTo: drivers_video-...@kernel-bugs.osdl.org
ReportedBy: avill...@ceibo.fiec.espol.edu.ec
Latest working kernel version: 2.6.29-rc5
Earliest failing kernel version: 2.6.29-rc6
Distribution: Fedora 10 i386
Hardware Environment:
/proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.70GHz
stepping : 2
cpu MHz : 1700.047
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pebs bts
bogomips : 3400.09
clflush size : 64
power management:
/proc/iomem:
00000000-0000ffff : reserved
00010000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000f0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-1f7effff : System RAM
00400000-0068676c : Kernel code
0068676d-007eca67 : Kernel data
00838000-00c3fd83 : Kernel bss
1f7f0000-1f7f7fff : ACPI Tables
1f7f8000-1f7fffff : ACPI Non-volatile Storage
ceb00000-debfffff : PCI Bus 0000:01
d0000000-d7ffffff : 0000:01:00.0
d0000000-d06effff : vesafb
ded00000-deefffff : PCI Bus 0000:01
dee70000-dee7ffff : 0000:01:00.0
dee80000-deefffff : 0000:01:00.0
df000000-df7fffff : 0000:00:09.0
dffe0000-dffe7fff : 0000:00:09.0
dfffee00-dfffeeff : 0000:00:12.0
dfffee00-dfffeeff : via-rhine
dfffef00-dfffefff : 0000:00:10.3
dfffef00-dfffefff : ehci_hcd
dffff000-dfffffff : 0000:00:09.0
e0000000-efffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
/proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:11.1
0170-0177 : pata_via
01f0-01f7 : 0000:00:11.1
01f0-01f7 : pata_via
0201-0208 : ns558-pnp
0295-0296 : it87
0295-0296 : it87
0330-0331 : MPU401 UART
0376-0376 : 0000:00:11.1
0376-0376 : pata_via
0378-037a : parport0
03c0-03df : vesafb
03f2-03f2 : floppy
03f4-03f5 : floppy
03f6-03f6 : 0000:00:11.1
03f6-03f6 : pata_via
03f7-03f7 : floppy
03f8-03ff : serial
0400-040f : 0000:00:11.0
0400-0407 : vt596_smbus
0800-087f : 0000:00:11.0
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-0823 : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
cc00-ccff : 0000:00:12.0
cc00-ccff : via-rhine
d000-d0ff : 0000:00:11.5
d000-d0ff : VIA8233
d400-d41f : 0000:00:10.0
d400-d41f : uhci_hcd
d800-d81f : 0000:00:10.1
d800-d81f : uhci_hcd
dc00-dc1f : 0000:00:10.2
dc00-dc1f : uhci_hcd
e000-e007 : 0000:00:0b.0
e400-e407 : 0000:00:0b.0
e400-e402 : parport1
e403-e407 : parport1
e800-e81f : 0000:00:0b.0
e800-e807 : serial
e808-e80f : serial
ec00-ecff : 0000:00:09.0
fc00-fc0f : 0000:00:11.1
fc00-fc0f : pata_via
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge
Subsystem: VIA Technologies, Inc. Device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: ded00000-deefffff
Prefetchable memory behind bridge: ceb00000-debfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 VGA compatible controller: Oak Technology, Inc OTI-64111 [Spitfire]
(rev 10) (prog-if 00 [VGA controller])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [disabled]
[size=4K]
Region 1: Memory at df000000 (32-bit, non-prefetchable) [disabled]
[size=8M]
Region 2: I/O ports at ec00 [disabled] [size=256]
Expansion ROM at dffe0000 [disabled] [size=32K]
00:0b.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART)
(rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd Device 5079
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=32]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e000 [size=8]
Kernel driver in use: serial
Kernel modules: parport_pc
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20
[EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at dfffef00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. KT4AV motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: via-ircc, i2c-viapro
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. K7VT2 motherboard
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet
Controller on VT8235
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at dfffee00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
Kernel modules: via-rhine
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
(prog-if 00 [VGA controller])
Subsystem: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dee80000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at dee70000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
Kernel modules: savagefb
Software Environment:
Linux version 2.6.29-rc8 (a...@karlalex.palosanto.com) (gcc version 4.3.2
20081105 (Red Hat 4.3.2-7) (GCC) ) #1 PREEMPT Sat Mar 21 13:57:36 ECT 2009
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux karlalex.palosanto.com 2.6.29-rc8 #1 PREEMPT Sat Mar 21 13:57:36 ECT 2009
i686 i686 i386 GNU/Linux
Gnu C 4.3.2
Gnu make 3.81
binutils 2.18.50.0.9
util-linux 2.14.1
mount support
module-init-tools 3.5
e2fsprogs 1.41.4
pcmciautils 014
quota-tools 3.16.
PPP 2.4.4
Linux C Library 2.9
Dynamic linker (ldd) 2.9
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
oprofile 0.9.4
Sh-utils 6.12
udev 127
wireless-tools 29
Modules Loaded usb_storage ipv6 fuse savage drm eeprom sco bridge stp
llc bnep l2cap bluetooth it87 hwmon_vid hwmon vfat fat dm_multipath uinput
ppdev snd_via82xx snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss floppy snd_pcm i2c_viapro
pcspkr sr_mod via_rhine i2c_core snd_timer mii snd_page_alloc cdrom via_ircc
irda crc_ccitt snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device ns558 snd
gameport soundcore parport_pc parport via_agp uhci_hcd ohci_hcd ehci_hcd
usbcore
Problem Description:
A regression was introduced between 2.6.29-rc5 and -rc6 that results in an
attempt to mmap2 on /dev/dri/card0 (ProSavageDDRK) to fail with EAGAIN. This
hits the X server and results in broken DRI/Mesa support.
Steps to reproduce:
Get 2.6.29-rc6 or higher and a Savage chipset (don't know about other chipsets)
Attempt to start X
Report DRI support (from Xorg.0.log)
When the bug hits, the following appears on the X log:
----------------
(II) [drm] loaded kernel module for "savage" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SAVAGE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SAVAGE(0): [drm] framebuffer handle = 0xd0000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [agp] Mode 0x1f000207 [AGP 0x1106/0x3148; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xe0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xe0100000
(II) SAVAGE(0): [drm] aperture handle = 0xd2000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x18a12000
(EE) SAVAGE(0): [drm] Could not map status page
(II) SAVAGE(0): [drm] removed 1 reserved context for kernel
(II) SAVAGE(0): [drm] unmapping 8192 bytes of SAREA 0xe0010000 at 0xb803a000
(II) SAVAGE(0): [drm] Closed DRM master.
(II) SAVAGE(0): Resetting ShadowStatus.
(EE) SAVAGE(0): DRI isn't enabled
----------------
A strace of the Xorg process shows:
open("/dev/dri/card0", O_RDWR|O_LARGEFILE) = 12
write(0, "drmOpenDevice: open result is 12,"..., 39) = 39
ioctl(12, DEVFSDIOC_GET_PROTO_REV, 0x9f89180) = 0
ioctl(12, DEVFSDIOC_GET_PROTO_REV, 0x9f89180) = 0
...
ioctl(12, 0xc0186415, 0xbfe7c678) = 0
write(0, "(II) SAVAGE(0): [drm] Status hand"..., 49) = 49
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 12, 0x14335) = -1 EAGAIN
(Resource temporarily unavailable)
write(2, "(EE) SAVAGE(0): [drm] Could not m"..., 48) = 48
write(0, "(EE) SAVAGE(0): [drm] Could not m"..., 48) = 48
munmap(0xffffffff, 4096) = -1 EINVAL (Invalid argument)
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel
