Dmesg report attached:- [ 18.088588] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 18.088653] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 18.338143] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 18.338214] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 18.338270] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 18.378688] ------------[ cut here ]------------ [ 18.378696] kernel BUG at mm/slab.c:521! [ 18.378699] invalid opcode: 0000 [#1] SMP [ 18.378706] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/enable [ 18.378709] CPU 0 [ 18.378713] Modules linked in: ppdev bnep video output lp parport snd_hda_codec_atihdmi snd_hda_codec_analog arc4 ecb snd_seq_dummy snd_seq_oss rtl8187 snd_seq_midi snd_hda_intel snd_hda_codec snd_rawmidi mac80211 snd_seq_midi_event snd_pcm_oss led_class snd_seq snd_mixer_oss eeprom_93cx6 snd_seq_device snd_pcm pcspkr iTCO_wdt iTCO_vendor_support intel_agp snd_timer snd soundcore snd_page_alloc cfg80211 usbhid ohci1394 ieee1394 r8169 mii sky2 [ 18.378786] Pid: 2927, comm: Xorg Not tainted 2.6.31.1 #5 P5K Premium [ 18.378789] RIP: e030:[<ffffffff81107afe>] [<ffffffff81107afe>] kfree+0xae/0x1d0 [ 18.378799] RSP: e02b:ffff8801e1469c78 EFLAGS: 00010046 [ 18.378802] RAX: ffffea0006906580 RBX: ffff8801e01cfff8 RCX: 80000000063cd063 [ 18.378805] RDX: 8000000000080000 RSI: 80000000063cd063 RDI: ffff8801e01d0000 [ 18.378808] RBP: ffff8801e1469cc8 R08: ffffffff8186cde0 R09: 0000000000000000 [ 18.378811] R10: 0000000000007ff0 R11: 0000000000000001 R12: ffffffff81315b94 [ 18.378814] R13: ffff8801e1469dc8 R14: 0000000000002000 R15: ffff8801e951d780 [ 18.378821] FS: 00007f2f9bd2a700(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000 [ 18.378825] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 18.378828] CR2: 0000000000e2e608 CR3: 00000001e0d7c000 CR4: 0000000000002660 [ 18.378831] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 18.378834] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 18.378838] Process Xorg (pid: 2927, threadinfo ffff8801e1468000, task ffff8801e6094480) [ 18.378840] Stack: [ 18.378842] ffffc90012977fff ffff8801e1469d30 ffff8801dfb37800 ffff8801e01d0000 [ 18.378850] <0> 0000000000000200 ffff8801e01cfff8 ffff8801dfb37800 ffff8801e1469dc8 [ 18.378859] <0> 0000000000002000 ffff8801e951d780 ffff8801e1469d68 ffffffff81315b94 [ 18.378869] Call Trace: [ 18.378877] [<ffffffff81315b94>] drm_sg_alloc+0x424/0x590 [ 18.378882] [<ffffffff81315d09>] drm_sg_alloc_ioctl+0x9/0x10 [ 18.378887] [<ffffffff8130ee25>] drm_ioctl+0x175/0x3c0 [ 18.378892] [<ffffffff8119d805>] ? ext4_file_write+0x55/0x180 [ 18.378897] [<ffffffff81315d00>] ? drm_sg_alloc_ioctl+0x0/0x10 [ 18.378903] [<ffffffff8100fe61>] ? xen_clocksource_read+0x21/0x30 [ 18.378908] [<ffffffff81010ef7>] ? xen_spin_lock+0xa7/0x110 [ 18.378913] [<ffffffff8111e47d>] vfs_ioctl+0x7d/0xa0 [ 18.378917] [<ffffffff8111e92b>] do_vfs_ioctl+0x3fb/0x590 [ 18.378921] [<ffffffff8111eb59>] sys_ioctl+0x99/0xa0 [ 18.378926] [<ffffffff8110f980>] ? sys_write+0x50/0x90 [ 18.378931] [<ffffffff81014f02>] system_call_fastpath+0x16/0x1b [ 18.378933] Code: ba 00 00 00 00 00 ea ff ff 48 01 d0 48 8b 10 66 85 d2 79 13 48 8b 40 10 48 8b 10 66 85 d2 79 07 48 8b 40 10 48 8b 10 84 d2 78 0a <0f> 0b eb fe 66 0f 1f 44 00 00 4c 8b 78 28 65 8b 04 25 88 e0 00 [ 18.379033] RIP [<ffffffff81107afe>] kfree+0xae/0x1d0 [ 18.379038] RSP <ffff8801e1469c78> [ 18.379042] ---[ end trace f245dfcffec6c0b3 ]--- [ 18.392165] [drm:drm_release] *ERROR* Device busy: 1 [ 20.202543] sky2 eth0: disabling interface [ 20.288075] sky2 peth0: enabling interface [ 20.288720] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 21.524894] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 21.524960] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 21.752539] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 21.752601] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 21.752654] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 21.795030] ------------[ cut here ]------------ [ 21.795037] kernel BUG at mm/slab.c:521! [ 21.795041] invalid opcode: 0000 [#2] SMP [ 21.795047] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/enable [ 21.795050] CPU 1 [ 21.795054] Modules linked in: binfmt_misc ppdev bnep video output lp parport snd_hda_codec_atihdmi snd_hda_codec_analog arc4 ecb snd_seq_dummy snd_seq_oss rtl8187 snd_seq_midi snd_hda_intel snd_hda_codec snd_rawmidi mac80211 snd_seq_midi_event snd_pcm_oss led_class snd_seq snd_mixer_oss eeprom_93cx6 snd_seq_device snd_pcm pcspkr iTCO_wdt iTCO_vendor_support intel_agp snd_timer snd soundcore snd_page_alloc cfg80211 usbhid ohci1394 ieee1394 r8169 mii sky2 [ 21.795128] Pid: 3317, comm: Xorg Tainted: G D 2.6.31.1 #5 P5K Premium [ 21.795131] RIP: e030:[<ffffffff81107afe>] [<ffffffff81107afe>] kfree+0xae/0x1d0 [ 21.795141] RSP: e02b:ffff8801e01fbc78 EFLAGS: 00010046 [ 21.795144] RAX: ffffea0006aee280 RBX: ffff8801e8d2fff8 RCX: 80000000043d0063 [ 21.795147] RDX: 8000000000080000 RSI: 80000000043d0063 RDI: ffff8801e8d30000 [ 21.795150] RBP: ffff8801e01fbcc8 R08: ffffffff8186cde0 R09: 0000000000000000 [ 21.795153] R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff81315b94 [ 21.795156] R13: ffff8801e01fbdc8 R14: 0000000000002000 R15: ffff8801e54c04c0 [ 21.795163] FS: 00007f0dbb7de700(0000) GS:ffffc90000018000(0000) knlGS:0000000000000000 [ 21.795166] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 21.795169] CR2: 00000000013d1608 CR3: 00000001dec6f000 CR4: 0000000000002660 [ 21.795173] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 21.795176] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 21.795179] Process Xorg (pid: 3317, threadinfo ffff8801e01fa000, task ffff8801e0116200) [ 21.795182] Stack: [ 21.795184] ffffc90014979fff ffff8801e01fbd30 ffff8801dfb37800 ffff8801e8d30000 [ 21.795192] <0> 0000000000000200 ffff8801e8d2fff8 ffff8801dfb37800 ffff8801e01fbdc8 [ 21.795201] <0> 0000000000002000 ffff8801e54c04c0 ffff8801e01fbd68 ffffffff81315b94 [ 21.795211] Call Trace: [ 21.795219] [<ffffffff81315b94>] drm_sg_alloc+0x424/0x590 [ 21.795224] [<ffffffff81312995>] ? drm_lock+0x255/0x3d0 [ 21.795228] [<ffffffff81315d09>] drm_sg_alloc_ioctl+0x9/0x10 [ 21.795233] [<ffffffff8130ee25>] drm_ioctl+0x175/0x3c0 [ 21.795238] [<ffffffff8119d805>] ? ext4_file_write+0x55/0x180 [ 21.795243] [<ffffffff81315d00>] ? drm_sg_alloc_ioctl+0x0/0x10 [ 21.795249] [<ffffffff8100fe61>] ? xen_clocksource_read+0x21/0x30 [ 21.795254] [<ffffffff81010ef7>] ? xen_spin_lock+0xa7/0x110 [ 21.795259] [<ffffffff8111e47d>] vfs_ioctl+0x7d/0xa0 [ 21.795264] [<ffffffff8111e92b>] do_vfs_ioctl+0x3fb/0x590 [ 21.795268] [<ffffffff8111eb59>] sys_ioctl+0x99/0xa0 [ 21.795273] [<ffffffff8110f980>] ? sys_write+0x50/0x90 [ 21.795277] [<ffffffff81014f02>] system_call_fastpath+0x16/0x1b [ 21.795280] Code: ba 00 00 00 00 00 ea ff ff 48 01 d0 48 8b 10 66 85 d2 79 13 48 8b 40 10 48 8b 10 66 85 d2 79 07 48 8b 40 10 48 8b 10 84 d2 78 0a <0f> 0b eb fe 66 0f 1f 44 00 00 4c 8b 78 28 65 8b 04 25 88 e0 00 [ 21.795380] RIP [<ffffffff81107afe>] kfree+0xae/0x1d0 [ 21.795385] RSP <ffff8801e01fbc78> [ 21.795389] ---[ end trace f245dfcffec6c0b4 ]--- [ 21.798496] [drm:drm_release] *ERROR* Device busy: 1 [ 22.081538] sky2 peth0: Link is up at 100 Mbps, full duplex, flow control both [ 22.082157] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 22.119000] r8169: eth1: link down [ 22.119550] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 24.372040] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.444865] device peth0 entered promiscuous mode [ 24.477124] eth0: port 1(peth0) entering forwarding state [ 24.954106] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 24.954171] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 25.183847] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 25.183912] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 25.183966] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 26.994058] xenbus_probe wake_waiting [ 26.994071] xenbus_probe wake_waiting [ 26.997905] XENBUS: Unable to read cpu state [ 26.998001] XENBUS: Unable to read cpu state [ 26.998192] xenbus_probe_devices backend [ 26.998261] xenbus_probe_devices failed xenbus_directory [ 26.998264] backend_probe_and_watch devices probed ok [ 26.998350] backend_probe_and_watch watch add ok ok [ 26.998352] backend_probe_and_watch all done [ 26.998355] xenbus_probe_devices device [ 26.998438] xenbus_probe_devices failed xenbus_directory [ 26.998442] frontend_probe_and_watch devices probed ok [ 26.998525] frontend_probe_and_watch watch add ok ok [ 26.998528] frontend_probe_and_watch all done [ 32.510017] peth0: no IPv6 routers present [ 34.800163] eth0: no IPv6 routers present
--- On Fri, 10/2/09, Boris Derzhavets <bderzhav...@yahoo.com> wrote: From: Boris Derzhavets <bderzhav...@yahoo.com> Subject: Re: [Xen-devel] Re: ATI radeon fails with "iommu=soft swiotlb=force" (seen on RV730/RV740 and RS780/RS800) To: "Konrad Rzeszutek Wilk" <konrad.w...@oracle.com>, "Jeremy Fitzhardinge" <jer...@goop.org> Cc: dri-devel@lists.sourceforge.net, xen-de...@lists.xensource.com, jbeul...@novell.com Date: Friday, October 2, 2009, 1:02 AM Patch applied on the box with Radeon HD 4650 and seems to be working for 2.6.31.1 under Xen 3.4.1 on top Ubuntu 9.04 Server ( Ubuntu Desktop installed via tasksel). Before login to Gnome Desktop monitor shows up for 2-3 seconds "power saving" message, like it has got disconnected, the awakes back and normal login procedure resumes. Boris. --- On Thu, 10/1/09, Jeremy Fitzhardinge <jer...@goop.org> wrote: From: Jeremy Fitzhardinge <jer...@goop.org> Subject: [Xen-devel] Re: ATI radeon fails with "iommu=soft swiotlb=force" (seen on RV730/RV740 and RS780/RS800) To: "Konrad Rzeszutek Wilk" <konrad.w...@oracle.com> Cc: dri-devel@lists.sourceforge.net, xen-de...@lists.xensource.com, jbeul...@novell.com Date: Thursday, October 1, 2009, 3:37 PM On 10/01/09 12:07, Jeremy Fitzhardinge wrote: > Could modify drm_vmalloc_dma to do the vmalloc "manually": > > 1. call __get_vm_area to reserve a chunk of vmalloc address space > 2. allocate a bunch of individual pages with dma_alloc_coherent > 3. insert them into the vmalloc mapping with map_vm_area > > That will guarantee a normal-looking vmalloc area with device-friendly > pages that subsequent pci_map_page operations will use as-is. > Like this (untested): diff --git a/drivers/gpu/drm/drm_scatter.c b/drivers/gpu/drm/drm_scatter.c index c7823c8..73bfa63 100644 --- a/drivers/gpu/drm/drm_scatter.c +++ b/drivers/gpu/drm/drm_scatter.c @@ -32,16 +32,60 @@ */ #include <linux/vmalloc.h> +#include <linux/mm.h> #include "drmP.h" #define DEBUG_SCATTER 0 -static inline void *drm_vmalloc_dma(unsigned long size) +static inline void *drm_vmalloc_dma(struct drm_device *drmdev, unsigned long size) { #if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE) return __vmalloc(size, GFP_KERNEL, PAGE_KERNEL | _PAGE_NO_CACHE); #else - return vmalloc_32(size); + struct device *dev = &drmdev->pdev->dev; + struct vm_struct *vma; + struct page **pages; + const int npages = PFN_UP(size); + int i; + + pages = kmalloc(npages * sizeof(*pages), GFP_KERNEL); + if (!pages) + goto out_free_pagearr; + + vma = __get_vm_area(size, VM_ALLOC, VMALLOC_START, VMALLOC_END); + if (!vma) + goto out_release_vma; + + for (i = 0; i < npages; i++) { + dma_addr_t phys; + void *addr; + addr = dma_alloc_coherent(dev, PAGE_SIZE, &phys, GFP_KERNEL); + if (addr == NULL) + goto out_free_pages; + + pages[i] = virt_to_page(addr); + } + + if (map_vm_area(vma, PAGE_KERNEL, &pages)) + goto out_free_pages; + + kfree(pages); + + return vma->addr; + +out_free_pages: + while(i > 0) { + void *addr = page_address(pages[--i]); + dma_free_coherent(dev, PAGE_SIZE, addr, virt_to_bus(addr)); + } + +out_release_vma: + vunmap(vma->addr); + +out_free_pagearr: + kfree(pages); + + return NULL; #endif } @@ -107,7 +151,7 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request) } memset((void *)entry->busaddr, 0, pages * sizeof(*entry->busaddr)); - entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT); + entry->virtual = drm_vmalloc_dma(dev, pages << PAGE_SHIFT); if (!entry->virtual) { kfree(entry->busaddr); kfree(entry->pagelist); _______________________________________________ Xen-devel mailing list xen-de...@lists.xensource.com http://lists.xensource.com/xen-devel -----Inline Attachment Follows----- _______________________________________________ Xen-devel mailing list xen-de...@lists.xensource.com http://lists.xensource.com/xen-devel
dmesg.drm.gz
Description: GNU Zip compressed data
------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf
-- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel