On Sun, Nov 22, 2009 at 9:15 AM, Rafael J. Wysocki <r...@sisk.pl> wrote: > Hi, > > I'm not really sure where this should be reported, but here it goes. > > After installing openSUSE 11.2 on my testbed nx6325 I noticed that resume > (from suspend to RAM) stopped working on it. Apparently, it hanged while > switching from the console back to X and the box remained completely > unresponsive after that (it didn't even react to the magic sysrq). However, > it used to work just fine with -rc7 and openSUSE 11.1, so I figured the > problem > was related to the new X driver, which is radeon module version 6.12.4 (xorg > server 1.6.5). > > So, I started to investigate and found that after a suspend from a framebuffer > console, the resume had always worked. However, when I switched from X to the > framebuffer console, suspended, resumed and switched back to X, the box hanged > immediately just like during resume after a suspend from under X. [There also > were some problems when switching from X to the framebuffer console and back > which seemd to be independent of suspend/resume (in short, the screen stays > black after a switch from the framebuffer console to X and you need to kill X > to fix this).]
You are using radeonfb on it? or vesafb? first test is to try without either of those installed. >From memory though that machines an Xpress 200M which is the the worst graphics card for use with open drivers and has always caused no-end of pain. Its also mostly undocumented when it comes to errata and workarounds. Dave. ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel