attach was not called (i already mentioned before).
anyway, thanks a lot for your help, i now completeley removed the driver,
removed any
entry for the driver in path_to_inst and devlink.tab, did a reconfigure reboot,
added the driver
again (with "-i ....") and now it seems to work (also after a reboot!)
thanks a lot for your hints!
christian
--
"I sense much NT in you, NT leads to Blue Screen.
Blue Screen leads to downtime, downtime leads to suffering. NT is the path to
the darkside."
- Unknown Unix Jedi
________________________________
From: ZhouAaron [mailto:[EMAIL PROTECTED]
Sent: Monday, November 03, 2008 10:30 AM
To: Liu, Jiang; Masopust, Christian; [email protected]
Subject: RE: [driver-discuss] why does my driver not load after a
reboot?
It seems your driver attatch() routine has something wrong! you can
check system log when running add_drv your driver.
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]; [email protected]
> Date: Mon, 3 Nov 2008 16:41:06 +0800
> Subject: Re: [driver-discuss] why does my driver not load after a
reboot?
>
> Seems the driver alias information has been lost. The driver alias
"my_label" is used to bind dirver to corresponding devices.
> If you use `add_drv -i "my_label" mydriver` to add your driver, could
you find something like `mydriver "mylabel"` in your /etc/driver_alias after
reboot?
>
> Masopust, Christian <mailto:[EMAIL PROTECTED]> wrote:
> > hello,
> >
> > already tried this, but behaviour is still the same,
> > "add_drv -i ... mydriver" works but "add_drv mydriver" not.
> >
> > the message i get when running add_drv without "-i" is:
> > Warning: Driver (mydriver) successfully added to system but failed
to
> > atta ch
> >
> > and debug-messages within /var/adm/messages show that only _info and
> > _init have been called, no probe and no attach !!
> >
> > why ??
> >
> > thanks,
> > christian
> >
> >
> >
> >> -----Original Message-----
> >> From: Liu, Jiang [mailto:[EMAIL PROTECTED]
> >> Sent: Monday, November 03, 2008 9:00 AM
> >> To: Masopust, Christian; [email protected]
> >> Subject: RE: why does my driver not load after a reboot?
> >>
> >> Hi Masopust,
> >> The device driver will be loaded when you first access
> >> the corresponding devices. You may force loading your driver
> >> at boot time by adding "ddi-forceattach=1" to mydriver.conf file.
> >>
> >> Masopust, Christian <> wrote:
> >>> hello,> >>>
> >>> i've written a driver which runs now fine but i still have
> >>> the problem that it won't load after a reboot. also after a
> >>> reboot i cannot load it with simply running "add_drv mydriver",
> >>> i always have to specify "-i ...." to load it.
> >>>
> >>> what did i wrong? any hints?
> >>>
> >>> thanks a lot,
> >>> christian
> _______________________________________________
> driver-discuss mailing list
> [email protected]
> http://mail.opensolaris.org/mailman/listinfo/driver-discuss
________________________________
使用新一代 Windows Live Messenger 轻松交流和共享！ 立刻下载！ <http://im.live.cn/>
_______________________________________________
driver-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/driver-discuss
