If this is a pci device (looks like one...),
you don't want parent="pseudo" in the .conf file.
Try removing the spm.conf file, rem_drv, and
again add_drv.
max
邓宁 wrote:
I have written a device named sample_pci_device by dml description language
in Simics. After booting the solaris system, the newly added pci device is
listed when I input the prtconf -D command at the prompt.
Here is the item:
...
pci, instance #1(driver name: pcisch)
pci104c, ac10 #104c is the vendor_id while ac10
is the device _id.
...
I followed the instructions in "Binding a Driver to a Device" to bind a
simple driver to the device. There are two files in the spm driver
directory:spm.c and spm.conf. In my spm.conf file, the device name and
parent is as follows:
name="pci104c" parent="pseudo";
I met some problem when add-drv the driver to the system:
...init_spec_child: parent=pseudo, bad spec(pc104c)
...init_spec_child: parent=zconsnex, bad spec(pci104c)
devfsadm: driver failed to attach:spm
Warning: Driver (spm) successfully added to system but failed to attach
I know it is the reason of .conf file that makes the mistake. Can you tell
me how to write a configuration file in solaris to bind my driver with the
device?
------------------------------------------------------------------------
_______________________________________________
driver-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/driver-discuss
_______________________________________________
driver-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/driver-discuss
