From: Wei WANG <wei_w...@realsil.com.cn>
These actions are individual for each reader model, so should be put in
extra_init_hw instead of rtsx_pci_init_hw.
Signed-off-by: Wei WANG <wei_w...@realsil.com.cn>
---
drivers/mfd/rts5209.c | 4 ++++
drivers/mfd/rts5227.c | 2 ++
drivers/mfd/rts5229.c | 4 ++++
drivers/mfd/rts5249.c | 2 ++
drivers/mfd/rtsx_pcr.c | 4 ----
5 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index c67935e..03a15f7 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -70,6 +70,10 @@ static int rts5209_extra_init_hw(struct rtsx_pcr *pcr)
/* Turn off LED */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO, 0xFF, 0x03);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+ /* Force CLKREQ# PIN to drive 0 to request clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO_DIR, 0xFF, 0x03);
/* Configure driving */
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index 42ebf5c..724ce4c5 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -101,6 +101,8 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index a0b695a..e8261d7 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -67,6 +67,10 @@ static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+ /* Force CLKREQ# PIN to drive 0 to request clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 79ff212..c5e54d7 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -104,6 +104,8 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 97526f1..ffd393c 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -972,8 +972,6 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, HOST_SLEEP_STATE, 0x03, 0x00);
/* Disable card clock */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, 0x1E, 0);
- /* Reset ASPM state to default value */
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
/* Reset delink mode */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CHANGE_LINK_STATE, 0x0A, 0);
/* Card driving select */
@@ -1003,8 +1001,6 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
* 0: ELBI interrupt flag[31:22] & [7:0] only can be write clear
*/
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, NFTS_TX_CTRL, 0x02, 0);
- /* Force CLKREQ# PIN to drive 0 to request clock */
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
err = rtsx_pci_send_cmd(pcr, 100);
if (err < 0)
--
1.7.9.5
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
