To better document the code, use the 8254.h helpers to set the timers instead of doing the outb() instructions.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com> Cc: Ian Abbott <abbo...@mev.co.uk> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- drivers/staging/comedi/drivers/ni_at_ao.c | 40 +++++++------------------------ 1 file changed, 9 insertions(+), 31 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c index d18aaf1..fed82f8 100644 --- a/drivers/staging/comedi/drivers/ni_at_ao.c +++ b/drivers/staging/comedi/drivers/ni_at_ao.c @@ -37,8 +37,11 @@ Configuration options: */ #include <linux/module.h> + #include "../comedidev.h" +#include "8253.h" + /* * Register map */ @@ -60,34 +63,7 @@ Configuration options: #define ATAO_CFG3_DOUTEN1 (1 << 2) #define ATAO_CFG3_EN2_5V (1 << 1) #define ATAO_CFG3_SCANEN (1 << 0) -#define ATAO_82C53_BASE 0x06 /* RW 8 */ -#define ATAO_82C53_CNTR1 0x06 /* RW 8 */ -#define ATAO_82C53_CNTR2 0x07 /* RW 8 */ -#define ATAO_82C53_CNTR3 0x08 /* RW 8 */ -#define ATAO_82C53_CNTRCMD 0x09 /* W 8 */ -#define CNTRSEL1 (1 << 7) -#define CNTRSEL0 (1 << 6) -#define RWSEL1 (1 << 5) -#define RWSEL0 (1 << 4) -#define MODESEL2 (1 << 3) -#define MODESEL1 (1 << 2) -#define MODESEL0 (1 << 1) -#define BCDSEL (1 << 0) - /* read-back command */ -#define COUNT (1 << 5) -#define STATUS (1 << 4) -#define CNTR3 (1 << 3) -#define CNTR2 (1 << 2) -#define CNTR1 (1 << 1) - /* status */ -#define OUT (1 << 7) -#define _NULL (1 << 6) -#define RW1 (1 << 5) -#define RW0 (1 << 4) -#define MODE2 (1 << 3) -#define MODE1 (1 << 2) -#define MODE0 (1 << 1) -#define BCD (1 << 0) +#define ATAO_82C53_BASE 0x06 #define ATAO_CFG1_REG 0x0a #define ATAO_CFG1_EXTINT2EN (1 << 15) #define ATAO_CFG1_EXTINT1EN (1 << 14) @@ -153,9 +129,11 @@ static void atao_reset(struct comedi_device *dev) devpriv->cfg1 = 0; outw(devpriv->cfg1, dev->iobase + ATAO_CFG1_REG); - outb(RWSEL0 | MODESEL2, dev->iobase + ATAO_82C53_CNTRCMD); - outb(0x03, dev->iobase + ATAO_82C53_CNTR1); - outb(CNTRSEL0 | RWSEL0 | MODESEL2, dev->iobase + ATAO_82C53_CNTRCMD); + /* Put outputs of counter 1 and counter 2 in a high state */ + i8254_load(dev->iobase + ATAO_82C53_BASE, 0, + 0, 0x0003, I8254_MODE4 | I8254_BINARY); + i8254_set_mode(dev->iobase + ATAO_82C53_BASE, 0, + 1, I8254_MODE4 | I8254_BINARY); outw(ATAO_CFG2_CALLD_NOP, dev->iobase + ATAO_CFG2_REG); -- 1.8.3.2 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel