On Fri, 01 Nov 2013, micky_ch...@realsil.com.cn wrote:
> From: Micky Ching <micky_ch...@realsil.com.cn>
>
> Add card reader rtl8042, rtl8402 is much like rtl8411, so just add it to
> rtl8411.c
>
> Signed-off-by: Micky Ching <micky_ch...@realsil.com.cn>
> ---
> drivers/mfd/rtl8411.c | 62
> ++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mfd/rtsx_pcr.c | 5 ++++
> drivers/mfd/rtsx_pcr.h | 1 +
> 3 files changed, 68 insertions(+)
Sorry Micky, but I'm not accepting this.
This patch adds 62 lines of duplicated code, with only a few
variations. Please find a way to generify the driver. Also I think we
should consider doing the voltage stuff using the Regulator Framework.
> diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
> index 5280135..9d37dd6 100644
> --- a/drivers/mfd/rtl8411.c
> +++ b/drivers/mfd/rtl8411.c
> @@ -498,3 +498,65 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr)
> rtl8411b_qfn64_ms_pull_ctl_disable_tbl;
> }
> }
> +
> +static int rtl8402_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> +{
> + u8 mask, val;
> + int err;
> +
> + mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8402) | BPP_PAD_MASK;
> + if (voltage == OUTPUT_3V3) {
> + err = rtsx_pci_write_register(pcr,
> + SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
> + if (err < 0)
> + return err;
> + val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8402) | BPP_PAD_3V3;
> + } else if (voltage == OUTPUT_1V8) {
> + err = rtsx_pci_write_register(pcr,
> + SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
> + if (err < 0)
> + return err;
> + val = (BPP_ASIC_2V0 << BPP_TUNED18_SHIFT_8402) | BPP_PAD_1V8;
> + } else {
> + return -EINVAL;
> + }
> +
> + return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
> +}
> +
> +static const struct pcr_ops rtl8402_pcr_ops = {
> + .fetch_vendor_settings = rtl8411_fetch_vendor_settings,
> + .extra_init_hw = rtl8411_extra_init_hw,
> + .optimize_phy = NULL,
> + .turn_on_led = rtl8411_turn_on_led,
> + .turn_off_led = rtl8411_turn_off_led,
> + .enable_auto_blink = rtl8411_enable_auto_blink,
> + .disable_auto_blink = rtl8411_disable_auto_blink,
> + .card_power_on = rtl8411_card_power_on,
> + .card_power_off = rtl8411_card_power_off,
> + .switch_output_voltage = rtl8402_switch_output_voltage,
> + .cd_deglitch = rtl8411_cd_deglitch,
> + .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
> + .force_power_down = rtl8411_force_power_down,
> +};
> +
> +void rtl8402_init_params(struct rtsx_pcr *pcr)
> +{
> + pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
> + pcr->num_slots = 2;
> + pcr->ops = &rtl8402_pcr_ops;
> +
> + pcr->flags = 0;
> + pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
> + pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
> + pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
> + pcr->aspm_en = ASPM_L1_EN;
> + pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
> + pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
> +
> + pcr->ic_version = rtl8411_get_ic_version(pcr);
> + pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
> + pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
> + pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
> + pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
> +}
> diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
> index 11e20af..93fabc7 100644
> --- a/drivers/mfd/rtsx_pcr.c
> +++ b/drivers/mfd/rtsx_pcr.c
> @@ -56,6 +56,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
> { PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> + { PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { 0, }
> };
> @@ -1046,6 +1047,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
> rts5229_init_params(pcr);
> break;
>
> + case 0x5286:
> + rtl8402_init_params(pcr);
> + break;
> +
> case 0x5289:
> rtl8411_init_params(pcr);
> break;
> diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
> index 947e79b..8cac8db 100644
> --- a/drivers/mfd/rtsx_pcr.h
> +++ b/drivers/mfd/rtsx_pcr.h
> @@ -29,6 +29,7 @@
>
> void rts5209_init_params(struct rtsx_pcr *pcr);
> void rts5229_init_params(struct rtsx_pcr *pcr);
> +void rtl8402_init_params(struct rtsx_pcr *pcr);
> void rtl8411_init_params(struct rtsx_pcr *pcr);
> void rts5227_init_params(struct rtsx_pcr *pcr);
> void rts5249_init_params(struct rtsx_pcr *pcr);
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
