This is the seventh patch of a series.
Signed-off-by: Gary Alan Rookard <garyrook...@gmail.com>
---
On branch staging-next
drivers/staging/bcm/DDRInit.c | 163 +++++++++++-------------------------------
1 file changed, 43 insertions(+), 120 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 8bb3283..57e6023 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -6,23 +6,21 @@
#define MIPS_CLOCK_REG 0x0f000820
/* DDR INIT-133Mhz */
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /* index for 0x0F00700 */0
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /* index for 0x0F007000 */
static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* # DPLL Clock
Setting */
{0x0F000800, 0x00007212},
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00000F95},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- /* Changed source for X-bar and MIPS
clock to APLL */
- {0x0f000840, 0x0FFF1B00},
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS
clock to APLL */
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a04C, 0x0000000C},
- /* Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -56,12 +54,9 @@ static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {
/* # DPLL Clock Se
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- /* # Enable BW improvement within
memory controller */
- {0x0F007094, 0x00000104},
- /* # Enable 2 ports within X-bar */
- {0x0F00A000, 0x00000016},
- /* # Enable start bit within memory
controller */
- {0x0F007018, 0x01010000}
+ {0x0F007094, 0x00000104}, /* # Enable BW improvement within
memory controller */
+ {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory
controller */
};
/* 80Mhz */
#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 /* index for 0x0F007000 */
@@ -76,8 +71,7 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /*
# DPLL Clock Settin
{0x0F00a080, 0x1C000000},
{0x0F00a000, 0x00000016},
{0x0F00a04C, 0x0000000C},
- /* Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01000000},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -112,8 +106,7 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /*
# DPLL Clock Settin
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
- /*# Enable start bit within memory
controller */
- {0x0F007018, 0x01010000}
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory
controller */
};
/* 100Mhz */
#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 /* index for 0x0F007000 */
@@ -123,19 +116,16 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] =
{/* # DPLL Clock Settin
{0x0f000820, 0x07F13E3F},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- /* Changed source for X-bar and MIPS clock to
APLL */
- /* 0x0f000840,0x0FFF1800, */
- {0x0f000840, 0x0FFF1B00},
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to
APLL */
+ /* 0x0f000840,0x0FFF1800, */
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a04C, 0x0000000C},
- /* # Enable 2 ports within X-bar */
- {0x0F00A000, 0x00000016},
- /*Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /*Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -169,12 +159,9 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] =
{/* # DPLL Clock Settin
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- /* # Enable BW improvement within memory
controller */
- {0x0F007094, 0x00000104},
- /* # Enable start bit within memory controller
*/
- {0x0F007018, 0x01010000}
+ {0x0F007094, 0x00000104}, /* # Enable BW improvement within memory
controller */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory
controller */
};
-
/* Net T3B DDR Settings */
/* DDR INIT-133Mhz */
static struct bcm_ddr_setting asDPLL_266MHZ[] = {
@@ -183,8 +170,7 @@ static struct bcm_ddr_setting asDPLL_266MHZ[] = {
{0x0f000810, 0x00000F95},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- /* Changed source for X-bar and MIPS
clock to APLL */
- {0x0f000840, 0x0FFF1B00},
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock
to APLL */
{0x0f000870, 0x00000002}
};
@@ -195,18 +181,14 @@ static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] =
{/* # DPLL Clock Settin
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13652},
{0x0f000840, 0x0FFF0800},
- /* Changed source for X-bar and MIPS
clock to APLL */
- {0x0f000880, 0x000003DD},
+ {0x0f000880, 0x000003DD}, /* Changed source for X-bar and MIPS
clock to APLL */
{0x0f000860, 0x00000000},
- /* Changed source for X-bar and MIPS
clock to APLL */
- {0x0F00a044, 0x1fffffff},
+ {0x0F00a044, 0x1fffffff}, /* Changed source for X-bar and MIPS
clock to APLL */
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- /* # Enable 2 ports within X-bar */
- {0x0F00A000, 0x00000016},
- /* Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -240,10 +222,8 @@ static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] =
{/* # DPLL Clock Settin
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- /* # Enable BW improvement within
memory controller */
- {0x0F007094, 0x00000104},
- /* # Enable start bit within memory
controller */
- {0x0F007018, 0x01010000},
+ {0x0F007094, 0x00000104}, /* # Enable BW improvement within
memory controller */
+ {0x0F007018, 0x01010000}, /* # Enable start bit within memory
controller */
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /*index for 0x0F007000 */
@@ -253,14 +233,12 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] =
{/* # DPLL Clock Setting
{0x0f000840, 0x0FFF1F00},
{0x0f000880, 0x000003DD},
{0x0f000860, 0x00000000},
-
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a000, 0x00000016},
-
/* Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001},
/* Memcontroller Default values */
{0x0F007004, 0x01000000},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -295,10 +273,8 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] =
{/* # DPLL Clock Setting
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
-
/* # Enable start bit within memory controller */
- {0x0F007018, 0x01010000}
+ {0x0F007018, 0x01010000}
/* # Enable start bit within memory controller */
};
-
/* 100Mhz */
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 /* index for 0x0F007000 */
static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {/* # DPLL Clock
Setting */
@@ -311,10 +287,8 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] =
{/* # DPLL Clock Settin
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
-
/*# Enable 2 ports within X-bar */
- {0x0F00A000, 0x00000016},
- /*
Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F00A000, 0x00000016},
/*# Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /*
Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -348,28 +322,22 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] =
{/* # DPLL Clock Settin
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- /* # Enable BW
improvement within memory controller */
- {0x0F007094, 0x00000104},
- /* # Enable
start bit within memory controller */
- {0x0F007018, 0x01010000}
+ {0x0F007094, 0x00000104}, /* # Enable BW
improvement within memory controller */
+ {0x0F007018, 0x01010000} /* # Enable
start bit within memory controller */
};
-
-
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 /*index for 0x0F007000 */
static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {/* # DPLL Clock
Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- /* Changed
source for X-bar and MIPS clock to APLL */
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed
source for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- /*
Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /*
Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -406,15 +374,12 @@ static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] =
{/* # DPLL Clock Setti
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- /*# Enable BW
improvement within memory controller */
- {0x0F007094, 0x00040000},
+ {0x0F007094, 0x00040000}, /*# Enable BW
improvement within memory controller */
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
/* # Enable 2
ports within X-bar */
- /* # Enable
start bit within memory controller */
- {0x0F007018, 0x01010000}
+ {0x0F007018, 0x01010000} /* # Enable
start bit within memory controller */
};
-
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 /* index for 0x0F007000 */
static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {/* # DPLL Clock
Setting */
{0x0f000810, 0x00002F95},
@@ -422,14 +387,12 @@ static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] =
{/* # DPLL Clock Setti
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- /* Changed
source for X-bar and MIPS clock to APLL */
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed
source for X-bar and MIPS clock to APLL */
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- /*
Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /*
Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -469,12 +432,9 @@ static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] =
{/* # DPLL Clock Setti
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- /* # Enable 2
ports within X-bar */
- {0x0F00A000, 0x00000016},
- /* # Enable
start bit within memory controller */
- {0x0F007018, 0x01010000}
+ {0x0F00A000, 0x00000016}, /* # Enable 2
ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable
start bit within memory controller */
};
-
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */
static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {/* # DPLL Clock
Setting */
{0x0f000820, 0x07F13FFF},
@@ -529,15 +489,9 @@ static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] =
{/* # DPLL Clock Settin
{0x0F0070C8, 0x00000104},
{0x0F007018, 0x01010000}
};
-
-
-
-
/* T3 LP-B (UMA-B) */
-
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 /* index for 0x0F007000 */
static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {/* # DPLL Clock
Setting */
-
{0x0f000820, 0x03F137DB},
{0x0f000810, 0x01842795},
{0x0f000860, 0x00000000},
@@ -591,15 +545,12 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]
= {/* # DPLL Clock Sett
{0x0F0070C8, 0x00000104},
{0x0F007018, 0x01010000}
};
-
-
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 /* index for 0x0F007000 */
static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {/* # DPLL Clock
Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- /* Changed
source for X-bar and MIPS clock to APLL */
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed
source for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
@@ -607,8 +558,7 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] =
{/* # DPLL Clock Sett
{0x0F00a084, 0x1Cffffff},/* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- /*
Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /*
Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -645,15 +595,12 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]
= {/* # DPLL Clock Sett
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- /* # Enable BW
improvement within memory controller */
- {0x0F007094, 0x00040000},
+ {0x0F007094, 0x00040000}, /* # Enable BW
improvement within memory controller */
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
/* # Enable 2
ports within X-bar */
- /* # Enable
start bit within memory controller */
- {0x0F007018, 0x01010000}
+ {0x0F007018, 0x01010000} /* # Enable
start bit within memory controller */
};
-
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 /*index for 0x0F007000 */
static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {/* # DPLL Clock
Setting */
{0x0f000810, 0x00002F95},
@@ -661,15 +608,13 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]
= {/* # DPLL Clock Sett
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- /* Changed
source for X-bar and MIPS clock to APLL */
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed
source for X-bar and MIPS clock to APLL */
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0f003050, 0x00000021},/* flash/eeprom clock divisor which set the
flash clock to 20 MHz */
{0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
- /*
Memcontroller Default values */
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /*
Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -709,12 +654,9 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] =
{/* # DPLL Clock Sett
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- /* # Enable 2
ports within X-bar */
- {0x0F00A000, 0x00000016},
- /* # Enable
start bit within memory controller */
- {0x0F007018, 0x01010000}
+ {0x0F00A000, 0x00000016}, /* # Enable 2
ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable
start bit within memory controller */
};
-
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 /*index for 0x0F007000 */
static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {/* # DPLL Clock
Setting */
{0x0f000820, 0x07F13FFF},
@@ -771,7 +713,6 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] =
{/* # DPLL Clock Setti
{0x0F007018, 0x01010000}
};
-
int ddr_init(struct bcm_mini_adapter *Adapter)
{
struct bcm_ddr_setting *psDDRSetting = NULL;
@@ -806,7 +747,6 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
default:
return -EINVAL;
}
-
break;
case T3LPB:
case BCS220_2:
@@ -832,9 +772,6 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
}
}
switch (Adapter->DDRSetting) {
-
-
-
case DDR_80_MHZ:
psDDRSetting = asT3LPB_DDRSetting80MHz;
RegCount = (sizeof(asT3B_DDRSetting80MHz)/
@@ -849,24 +786,20 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
psDDRSetting = asT3LPB_DDRSetting133MHz;
RegCount = (sizeof(asT3B_DDRSetting133MHz)/
sizeof(struct
bcm_ddr_setting));
-
if (Adapter->bMipsConfig == MIPS_200_MHZ)
uiClockSetting = 0x03F13652;
else
uiClockSetting = 0x03F1365B;
break;
-
case DDR_160_MHZ:
psDDRSetting = asT3LPB_DDRSetting160MHz;
RegCount =
sizeof(asT3LPB_DDRSetting160MHz)/sizeof(struct bcm_ddr_setting);
-
if (Adapter->bMipsConfig == MIPS_200_MHZ)
uiClockSetting = 0x03F137D2;
else
uiClockSetting = 0x03F137DB;
}
break;
-
case 0xbece0110:
case 0xbece0120:
case 0xbece0121:
@@ -906,7 +839,6 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
sizeof(struct bcm_ddr_setting));
break;
case DDR_133_MHZ:
-
if (Adapter->bDPLLConfig == PLL_266_MHZ) {
/*266Mhz PLL selected. */
memcpy(asT3B_DDRSetting133MHz,
asDPLL_266MHZ,
sizeof(asDPLL_266MHZ));
@@ -927,7 +859,6 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
return -EINVAL;
}
break;
-
}
default:
return -EINVAL;
@@ -949,7 +880,6 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
RegCount--;
psDDRSetting++;
}
-
if (Adapter->chip_id >= 0xbece3300) {
mdelay(3);
if ((Adapter->chip_id != BCS220_2) &&
@@ -982,7 +912,6 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
}
}
mdelay(3);
-
/* DC/DC standby change...
* This is to be done only for Hybrid PMU mode.
* with the current h/w there is no way to detect this.
@@ -1023,7 +952,6 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
return retval;
}
} else if (Adapter->PmuMode == HYBRID_MODE_6) {
-
retval = rdmalt(Adapter, (UINT)0x0f000c00,
&uiResetValue, sizeof(uiResetValue));
if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM,
DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
@@ -1098,7 +1026,6 @@ int download_ddr_settings(struct bcm_mini_adapter
*Adapter)
return -EINVAL;
}
break;
-
case T3LPB:
case BCS220_2:
case BCS220_2BC:
@@ -1124,7 +1051,6 @@ int download_ddr_settings(struct bcm_mini_adapter
*Adapter)
RegCount -=
T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
-
case DDR_160_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3LPB_DDRSetting160MHz;
@@ -1194,7 +1120,6 @@ int download_ddr_settings(struct bcm_mini_adapter
*Adapter)
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value,
sizeof(value));
if (retval) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n",
__func__, __LINE__);
-
return retval;
}
ul_ddr_setting_load_addr += sizeof(ULONG);
@@ -1208,7 +1133,6 @@ int download_ddr_settings(struct bcm_mini_adapter
*Adapter)
ul_ddr_setting_load_addr += sizeof(ULONG);
RegCount *= (sizeof(struct bcm_ddr_setting)/sizeof(ULONG));
-
while (RegCount && !retval) {
value = psDDRSetting->ulRegAddress ;
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value,
sizeof(value));
@@ -1223,7 +1147,6 @@ int download_ddr_settings(struct bcm_mini_adapter
*Adapter)
}
} else {
value = psDDRSetting->ulRegValue;
-
if (STATUS_SUCCESS != wrmalt(Adapter,
ul_ddr_setting_load_addr ,
&value, sizeof(value)))
{
BCM_DEBUG_PRINT(Adapter,
DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__);
--
1.8.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
