From: Micky Ching <micky_ch...@realsil.com.cn>
in order to remove duplicated code in rtl8411, we make 8411 as the base
init params, and other like-8411 chips will just change the different
value with 8411, this can save some source code.
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
Signed-off-by: Micky Ching <micky_ch...@realsil.com.cn>
---
drivers/mfd/rtl8411.c | 63 +++++++++---------------------------------------
drivers/mfd/rtsx_pcr.h | 8 ++++++
2 files changed, 19 insertions(+), 52 deletions(-)
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 5280135..c9eab9d 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -279,7 +279,7 @@ static int rtl8411_conv_clk_and_div_n(int input, int dir)
return output;
}
-static const struct pcr_ops rtl8411_pcr_ops = {
+static struct pcr_ops rtl8411_pcr_ops = {
.fetch_vendor_settings = rtl8411_fetch_vendor_settings,
.extra_init_hw = rtl8411_extra_init_hw,
.optimize_phy = NULL,
@@ -295,22 +295,6 @@ static const struct pcr_ops rtl8411_pcr_ops = {
.force_power_down = rtl8411_force_power_down,
};
-static const struct pcr_ops rtl8411b_pcr_ops = {
- .fetch_vendor_settings = rtl8411b_fetch_vendor_settings,
- .extra_init_hw = rtl8411b_extra_init_hw,
- .optimize_phy = NULL,
- .turn_on_led = rtl8411_turn_on_led,
- .turn_off_led = rtl8411_turn_off_led,
- .enable_auto_blink = rtl8411_enable_auto_blink,
- .disable_auto_blink = rtl8411_disable_auto_blink,
- .card_power_on = rtl8411_card_power_on,
- .card_power_off = rtl8411_card_power_off,
- .switch_output_voltage = rtl8411_switch_output_voltage,
- .cd_deglitch = rtl8411_cd_deglitch,
- .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
- .force_power_down = rtl8411_force_power_down,
-};
-
/* SD Pull Control Enable:
* SD_DAT[3:0] ==> pull up
* SD_CD ==> pull up
@@ -456,45 +440,20 @@ void rtl8411_init_params(struct rtsx_pcr *pcr)
pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
pcr->ic_version = rtl8411_get_ic_version(pcr);
- pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
- pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
- pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
- pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
+
+ set_pull_ctrl_tables(rtl8411);
}
void rtl8411b_init_params(struct rtsx_pcr *pcr)
{
- pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
- pcr->num_slots = 2;
- pcr->ops = &rtl8411b_pcr_ops;
-
- pcr->flags = 0;
- pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
- pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
- pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
- pcr->aspm_en = ASPM_L1_EN;
- pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
- pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
+ rtl8411_init_params(pcr);
- pcr->ic_version = rtl8411_get_ic_version(pcr);
+ rtl8411_pcr_ops.fetch_vendor_settings =
+ rtl8411b_fetch_vendor_settings;
+ rtl8411_pcr_ops.extra_init_hw = rtl8411b_extra_init_hw;
- if (rtl8411b_is_qfn48(pcr)) {
- pcr->sd_pull_ctl_enable_tbl =
- rtl8411b_qfn48_sd_pull_ctl_enable_tbl;
- pcr->sd_pull_ctl_disable_tbl =
- rtl8411b_qfn48_sd_pull_ctl_disable_tbl;
- pcr->ms_pull_ctl_enable_tbl =
- rtl8411b_qfn48_ms_pull_ctl_enable_tbl;
- pcr->ms_pull_ctl_disable_tbl =
- rtl8411b_qfn48_ms_pull_ctl_disable_tbl;
- } else {
- pcr->sd_pull_ctl_enable_tbl =
- rtl8411b_qfn64_sd_pull_ctl_enable_tbl;
- pcr->sd_pull_ctl_disable_tbl =
- rtl8411b_qfn64_sd_pull_ctl_disable_tbl;
- pcr->ms_pull_ctl_enable_tbl =
- rtl8411b_qfn64_ms_pull_ctl_enable_tbl;
- pcr->ms_pull_ctl_disable_tbl =
- rtl8411b_qfn64_ms_pull_ctl_disable_tbl;
- }
+ if (rtl8411b_is_qfn48(pcr))
+ set_pull_ctrl_tables(rtl8411b_qfn48);
+ else
+ set_pull_ctrl_tables(rtl8411b_qfn64);
}
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 947e79b..26b52ec 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -63,4 +63,12 @@ static inline u8 map_sd_drive(int idx)
#define rtl8411_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 5) & 0x07)
#define rtl8411b_reg_to_sd30_drive_sel_3v3(reg) ((reg) & 0x03)
+#define set_pull_ctrl_tables(__device) \
+do { \
+ pcr->sd_pull_ctl_enable_tbl = __device##_sd_pull_ctl_enable_tbl; \
+ pcr->sd_pull_ctl_disable_tbl = __device##_sd_pull_ctl_disable_tbl; \
+ pcr->ms_pull_ctl_enable_tbl = __device##_ms_pull_ctl_enable_tbl; \
+ pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
+} while (0)
+
#endif
--
1.7.9.5
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
