This patch fixes the register map defines for the digital output registers
such that they are all the real offsets to each register, rather than a
mix of real offsets and adders to those offsets.
Further, some of the old defines were being used incorrectly in the
i_APCI1564_Reset() function. Upon swapping the old defines out for the
new ones in this function, their use has been corrected.
Signed-off-by: Chase Southwood <chase.southw...@yahoo.com>
---
2: Simplified commit message, fixed indentation and whitespace damage.
I have test applied this patch, it should work now.
.../comedi/drivers/addi-data/hwdrv_apci1564.c | 50 +++++++---------------
1 file changed, 16 insertions(+), 34 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index 2c2bbd8..d493d01 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -46,21 +46,10 @@ This program is distributed in the hope that it will be
useful, but WITHOUT ANY
#define APCI1564_ADDRESS_RANGE 128
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-/* Output defines */
-#define APCI1564_DIGITAL_OP 0x18
-#define APCI1564_DIGITAL_OP_RW 0
-#define APCI1564_DIGITAL_OP_INTERRUPT 4
-#define APCI1564_DIGITAL_OP_IRQ 12
-
/* Digital Input IRQ Function Selection */
#define ADDIDATA_OR 0
#define ADDIDATA_AND 1
-/* Digital Output Interrupt Status */
-#define APCI1564_DIGITAL_OP_INTERRUPT_STATUS 8
-
/* Digital Input Interrupt Enable Disable. */
#define APCI1564_DIGITAL_IP_INTERRUPT_ENABLE 0x4
#define APCI1564_DIGITAL_IP_INTERRUPT_DISABLE 0xfffffffb
@@ -99,6 +88,10 @@ This program is distributed in the hope that it will be
useful, but WITHOUT ANY
#define APCI1564_DI_INT_MODE2_REG 0x0c
#define APCI1564_DI_INT_STATUS_REG 0x10
#define APCI1564_DI_IRQ_REG 0x14
+#define APCI1564_DO_REG 0x18
+#define APCI1564_DO_INT_CTRL_REG 0x1c
+#define APCI1564_DO_INT_STATUS_REG 0x20
+#define APCI1564_DO_IRQ_REG 0x24
/* Global variables */
static unsigned int ui_InterruptStatus_1564;
@@ -226,12 +219,8 @@ static int i_APCI1564_ConfigDigitalOutput(struct
comedi_device *dev,
else
ul_Command = ul_Command & 0xFFFFFFFD;
- outl(ul_Command,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_INTERRUPT);
- ui_InterruptData =
- inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_INTERRUPT);
+ outl(ul_Command, devpriv->i_IobaseAmcc + APCI1564_DO_INT_CTRL_REG);
+ ui_InterruptData = inl(devpriv->i_IobaseAmcc +
APCI1564_DO_INT_CTRL_REG);
devpriv->tsk_Current = current;
return insn->n;
}
@@ -243,12 +232,10 @@ static int apci1564_do_insn_bits(struct comedi_device
*dev,
{
struct addi_private *devpriv = dev->private;
- s->state = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_RW);
+ s->state = inl(devpriv->i_IobaseAmcc + APCI1564_DO_REG);
if (comedi_dio_update_state(s, data))
- outl(s->state, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_RW);
+ outl(s->state, devpriv->i_IobaseAmcc + APCI1564_DO_REG);
data[1] = s->state;
@@ -317,9 +304,7 @@ static int i_APCI1564_ConfigTimerCounterWatchdog(struct
comedi_device *dev,
if (data[1] == 1) {
outl(0x02, devpriv->i_IobaseAmcc + APCI1564_TIMER +
APCI1564_TCW_PROG); /* Enable TIMER int & DISABLE ALL THE OTHER int SOURCES */
outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
- outl(0x0,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_IRQ);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_IRQ_REG);
outl(0x0,
devpriv->i_IobaseAmcc +
APCI1564_DIGITAL_OP_WATCHDOG +
@@ -634,8 +619,7 @@ static void v_APCI1564_Interrupt(int irq, void *d)
unsigned int ul_Command2 = 0;
ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG) & 0x01;
- ui_DO = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_IRQ) & 0x01;
+ ui_DO = inl(devpriv->i_IobaseAmcc + APCI1564_DO_IRQ_REG) & 0x01;
ui_Timer =
inl(devpriv->i_IobaseAmcc + APCI1564_TIMER +
APCI1564_TCW_IRQ) & 0x01;
@@ -666,13 +650,9 @@ static void v_APCI1564_Interrupt(int irq, void *d)
if (ui_DO == 1) {
/* Check for Digital Output interrupt Type - 1: Vcc interrupt
2: CC interrupt. */
- ui_Type =
- inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_INTERRUPT_STATUS) & 0x3;
+ ui_Type = inl(devpriv->i_IobaseAmcc +
APCI1564_DO_INT_STATUS_REG) & 0x3;
/* Disable the Interrupt */
- outl(0x0,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
- APCI1564_DIGITAL_OP_INTERRUPT);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_INT_CTRL_REG);
/* Sends signal to user space */
send_sig(SIGIO, devpriv->tsk_Current, 0);
@@ -819,8 +799,10 @@ static int i_APCI1564_Reset(struct comedi_device *dev)
outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE2_REG);
devpriv->b_DigitalOutputRegister = 0;
ui_Type = 0;
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP); /* Resets the
output channels */
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_INTERRUPT);
/* Disables the interrupt. */
+ /* Resets the output channels */
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_REG);
+ /* Disables the interrupt. */
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_INT_CTRL_REG);
outl(0x0,
devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG +
APCI1564_TCW_RELOAD_VALUE);
--
1.8.5.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
