Am Dienstag, 20. Oktober 2020, 21:38:50 CET schrieb Helen Koike:
> From: Eddie Cai <eddie.cai.li...@gmail.com>
> 
> Enable ISP and camera sensor ov2685 and ov5695 for Scarlet Chromebook
> 
> Verified with:
>     make ARCH=arm64 dtbs_check
> 
> Signed-off-by: Shunqian Zheng <zhen...@rock-chips.com>
> Signed-off-by: Eddie Cai <eddie.cai.li...@gmail.com>
> Signed-off-by: Tomasz Figa <tf...@chromium.org>
> Signed-off-by: Helen Koike <helen.ko...@collabora.com>
> Reviewed-by: Tomasz Figa <tf...@chromium.org>


looks good, and I'd like to apply this one after the drivers/media-patches
of this series got applied.


Thanks
Heiko

> ---
>  .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 74 +++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi 
> b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
> index 60cd1c18cd4e0..beee5fbb34437 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
> @@ -296,6 +296,52 @@ camera: &i2c7 {
>  
>       /* 24M mclk is shared between world and user cameras */
>       pinctrl-0 = <&i2c7_xfer &test_clkout1>;
> +
> +     /* Rear-facing camera */
> +     wcam: camera@36 {
> +             compatible = "ovti,ov5695";
> +             reg = <0x36>;
> +             pinctrl-names = "default";
> +             pinctrl-0 = <&wcam_rst>;
> +
> +             clocks = <&cru SCLK_TESTCLKOUT1>;
> +             clock-names = "xvclk";
> +
> +             avdd-supply = <&pp2800_cam>;
> +             dvdd-supply = <&pp1250_cam>;
> +             dovdd-supply = <&pp1800_s0>;
> +             reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
> +
> +             port {
> +                     wcam_out: endpoint {
> +                             remote-endpoint = <&mipi_in_wcam>;
> +                             data-lanes = <1 2>;
> +                     };
> +             };
> +     };
> +
> +     /* Front-facing camera */
> +     ucam: camera@3c {
> +             compatible = "ovti,ov2685";
> +             reg = <0x3c>;
> +             pinctrl-names = "default";
> +             pinctrl-0 = <&ucam_rst>;
> +
> +             clocks = <&cru SCLK_TESTCLKOUT1>;
> +             clock-names = "xvclk";
> +
> +             avdd-supply = <&pp2800_cam>;
> +             dovdd-supply = <&pp1800_s0>;
> +             dvdd-supply = <&pp1800_s0>;
> +             reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> +
> +             port {
> +                     ucam_out: endpoint {
> +                             remote-endpoint = <&mipi_in_ucam>;
> +                             data-lanes = <1>;
> +                     };
> +             };
> +     };
>  };
>  
>  &cdn_dp {
> @@ -353,10 +399,38 @@ &io_domains {
>       gpio1830-supply = <&pp1800_s0>;         /* APIO4_VDD;  4c 4d */
>  };
>  
> +&isp0 {
> +     status = "okay";
> +
> +     ports {
> +             port@0 {
> +                     mipi_in_wcam: endpoint@0 {
> +                             reg = <0>;
> +                             remote-endpoint = <&wcam_out>;
> +                             data-lanes = <1 2>;
> +                     };
> +
> +                     mipi_in_ucam: endpoint@1 {
> +                             reg = <1>;
> +                             remote-endpoint = <&ucam_out>;
> +                             data-lanes = <1>;
> +                     };
> +             };
> +     };
> +};
> +
> +&isp0_mmu {
> +     status = "okay";
> +};
> +
>  &max98357a {
>       sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
>  };
>  
> +&mipi_dphy_rx0 {
> +     status = "okay";
> +};
> +
>  &mipi_dsi {
>       status = "okay";
>       clock-master;
> 




_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to