The commit adds rt2880 compatible node in binding document. Signed-off-by: Sergio Paracuellos <sergio.paracuel...@gmail.com> --- .../pinctrl/ralink,rt2880-pinmux.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml new file mode 100644 index 000000000000..d946219a115c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink rt2880 pinmux controller + +maintainers: + - Sergio Paracuellos <sergio.paracuel...@gmail.com> + +description: + The rt2880 pinmux can only set the muxing of pin groups. muxing indiviual pins + is not supported. There is no pinconf support. + +properties: + compatible: + enum: + - ralink,rt2880-pinmux + + pinctrl-0: + description: + A phandle to the node containing the subnodes containing default + configurations. + + pinctrl-names: + description: + A pinctrl state named "default" must be defined. + const: default + +required: + - compatible + - pinctrl-names + - pinctrl-0 + +patternProperties: + '^.*$': + if: + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. + $ref: "pinmux-node.yaml" + required: + - groups + - function + additionalProperties: false + then: + properties: + groups: + description: + Name of the pin group to use for the functions. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2, mdio, + pcie, sdhci] + function: + description: + The mux function to select + $ref: "/schemas/types.yaml#/definitions/string" + enum: [gpio, i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2, + mdio, nand1, nand2, sdhci] + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,rt2880-pinmux"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + }; + + i2c_pins: i2c0 { + i2c0 { + groups = "i2c"; + function = "i2c"; + }; + }; + }; -- 2.25.1 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel