For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gr...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/ni_65xx.c | 46 ++++++++++++++++----------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c
b/drivers/staging/comedi/drivers/ni_65xx.c
index 5218e67..07d5949 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -618,44 +618,44 @@ static int ni_65xx_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[0];
if (board->num_di_ports) {
- s->type = COMEDI_SUBD_DI;
- s->subdev_flags = SDF_READABLE;
- s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_di_ports);
- s->range_table = &range_digital;
- s->maxdata = 1;
- s->insn_config = ni_65xx_dio_insn_config;
- s->insn_bits = ni_65xx_dio_insn_bits;
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_di_ports);
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = ni_65xx_dio_insn_bits;
+ s->insn_config = ni_65xx_dio_insn_config;
/* the input ports always start at port 0 */
s->private = (void *)0;
} else {
- s->type = COMEDI_SUBD_UNUSED;
+ s->type = COMEDI_SUBD_UNUSED;
}
s = &dev->subdevices[1];
if (board->num_do_ports) {
- s->type = COMEDI_SUBD_DO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_do_ports);
- s->range_table = &range_digital;
- s->maxdata = 1;
- s->insn_bits = ni_65xx_dio_insn_bits;
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_do_ports);
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = ni_65xx_dio_insn_bits;
/* the output ports always start after the input ports */
s->private = (void *)(unsigned long)board->num_di_ports;
} else {
- s->type = COMEDI_SUBD_UNUSED;
+ s->type = COMEDI_SUBD_UNUSED;
}
s = &dev->subdevices[2];
if (board->num_dio_ports) {
- s->type = COMEDI_SUBD_DIO;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_dio_ports);
- s->range_table = &range_digital;
- s->maxdata = 1;
- s->insn_config = ni_65xx_dio_insn_config;
- s->insn_bits = ni_65xx_dio_insn_bits;
+ s->type = COMEDI_SUBD_DIO;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = NI_65XX_PORT_TO_CHAN(board->num_dio_ports);
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = ni_65xx_dio_insn_bits;
+ s->insn_config = ni_65xx_dio_insn_config;
/* the input/output ports always start at port 0 */
s->private = (void *)0;
@@ -666,7 +666,7 @@ static int ni_65xx_auto_attach(struct comedi_device *dev,
devpriv->mmio + NI_65XX_IO_SEL_REG(i));
}
} else {
- s->type = COMEDI_SUBD_UNUSED;
+ s->type = COMEDI_SUBD_UNUSED;
}
s = &dev->subdevices[3];
--
1.9.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
