For aesthetics, add some whitespace to the subdevice init and
tidy it up a bit.
Unfortunately we can't get rid of the '#ifdef PCIDMA' here yet due
to other ifdefery in this file. For now just add the correct test
so that the async command support is not hooked up unless we have
an IRQ and DMA.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gr...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/ni_mio_common.c | 64 +++++++++++++-------------
1 file changed, 33 insertions(+), 31 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c
b/drivers/staging/comedi/drivers/ni_mio_common.c
index 4932b4db..6545f11 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -5490,7 +5490,6 @@ static int ni_E_init(struct comedi_device *dev,
const struct ni_board_struct *board = comedi_board(dev);
struct ni_private *devpriv = dev->private;
struct comedi_subdevice *s;
- enum ni_gpct_variant counter_variant;
int ret;
int i;
@@ -5735,44 +5734,47 @@ static int ni_E_init(struct comedi_device *dev,
s->insn_config = ni_rtsi_insn_config;
ni_rtsi_init(dev);
- if (devpriv->is_m_series)
- counter_variant = ni_gpct_variant_m_series;
- else
- counter_variant = ni_gpct_variant_e_series;
+ /* allocate and initialize the gpct counter device */
devpriv->counter_dev = ni_gpct_device_construct(dev,
- &ni_gpct_write_register,
- &ni_gpct_read_register,
- counter_variant,
- NUM_GPCT);
+ ni_gpct_write_register,
+ ni_gpct_read_register,
+ (devpriv->is_m_series)
+ ? ni_gpct_variant_m_series
+ : ni_gpct_variant_e_series,
+ NUM_GPCT);
if (!devpriv->counter_dev)
return -ENOMEM;
- /* General purpose counters */
+ /* Counter (gpct) subdevices */
for (i = 0; i < NUM_GPCT; ++i) {
+ struct ni_gpct *gpct = &devpriv->counter_dev->counters[i];
+
+ /* setup and initialize the counter */
+ gpct->chip_index = 0;
+ gpct->counter_index = i;
+ ni_tio_init_counter(gpct);
+
s = &dev->subdevices[NI_GPCT_SUBDEV(i)];
- s->type = COMEDI_SUBD_COUNTER;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
- s->n_chan = 3;
- if (devpriv->is_m_series)
- s->maxdata = 0xffffffff;
- else
- s->maxdata = 0xffffff;
- s->insn_read = ni_tio_insn_read;
- s->insn_write = ni_tio_insn_read;
- s->insn_config = ni_tio_insn_config;
+ s->type = COMEDI_SUBD_COUNTER;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
+ s->n_chan = 3;
+ s->maxdata = (devpriv->is_m_series) ? 0xffffffff
+ : 0x00ffffff;
+ s->insn_read = ni_tio_insn_read;
+ s->insn_write = ni_tio_insn_read;
+ s->insn_config = ni_tio_insn_config;
#ifdef PCIDMA
- s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */;
- s->do_cmd = &ni_gpct_cmd;
- s->len_chanlist = 1;
- s->do_cmdtest = ni_tio_cmdtest;
- s->cancel = &ni_gpct_cancel;
- s->async_dma_dir = DMA_BIDIRECTIONAL;
-#endif
- s->private = &devpriv->counter_dev->counters[i];
+ if (dev->irq && devpriv->mite) {
+ s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */;
+ s->len_chanlist = 1;
+ s->do_cmdtest = ni_tio_cmdtest;
+ s->do_cmd = ni_gpct_cmd;
+ s->cancel = ni_gpct_cancel;
- devpriv->counter_dev->counters[i].chip_index = 0;
- devpriv->counter_dev->counters[i].counter_index = i;
- ni_tio_init_counter(&devpriv->counter_dev->counters[i]);
+ s->async_dma_dir = DMA_BIDIRECTIONAL;
+ }
+#endif
+ s->private = gpct;
}
/* Frequency output */
--
1.9.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
