On 18/07/14 16:33, Masanari Iida wrote:
This patch add missing CR in messages within vme_pio2_core.c

Signed-off-by: Masanari Iida <standby2...@gmail.com>

Acked-by: Martyn Welch <martyn.we...@ge.com>


---
  drivers/staging/vme/devices/vme_pio2_core.c | 12 ++++++------
  1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/vme/devices/vme_pio2_core.c 
b/drivers/staging/vme/devices/vme_pio2_core.c
index fd19c25..84c5a07 100644
--- a/drivers/staging/vme/devices/vme_pio2_core.c
+++ b/drivers/staging/vme/devices/vme_pio2_core.c
@@ -182,30 +182,30 @@ static int pio2_match(struct vme_dev *vdev)

        if (vdev->num >= bus_num) {
                dev_err(&vdev->dev,
-                       "The enumeration of the VMEbus to which the board is 
connected must be specified");
+                       "The enumeration of the VMEbus to which the board is 
connected must be specified\n");
                return 0;
        }

        if (vdev->num >= base_num) {
                dev_err(&vdev->dev,
-                       "The VME address for the cards registers must be 
specified");
+                       "The VME address for the cards registers must be 
specified\n");
                return 0;
        }

        if (vdev->num >= vector_num) {
                dev_err(&vdev->dev,
-                       "The IRQ vector used by the card must be specified");
+                       "The IRQ vector used by the card must be specified\n");
                return 0;
        }

        if (vdev->num >= level_num) {
                dev_err(&vdev->dev,
-                       "The IRQ level used by the card must be specified");
+                       "The IRQ level used by the card must be specified\n");
                return 0;
        }

        if (vdev->num >= variant_num) {
-               dev_err(&vdev->dev, "The variant of the card must be 
specified");
+               dev_err(&vdev->dev, "The variant of the card must be 
specified\n");
                return 0;
        }

@@ -324,7 +324,7 @@ static int pio2_probe(struct vme_dev *vdev)
        retval = pio2_reset_card(card);
        if (retval) {
                dev_err(&card->vdev->dev,
-                       "Failed to reset card, is location valid?");
+                       "Failed to reset card, is location valid?\n");
                retval = -ENODEV;
                goto err_reset;
        }


--
Martyn Welch (Lead Software Engineer)  | Registered in England and Wales
GE Intelligent Platforms               | (3828642) at 100 Barbirolli Square
T +44(0)1327322748                     | Manchester, M2 3AB
E martyn.we...@ge.com                  | VAT:GB 927559189
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to