This is a patch to the r8180_93cx6.c file that fixes
commenting style warning
Signed-off-by: Sanjeev Sharma <sanjeev_sha...@mentor.com>
---
Changes in v2:
- Added signed-off field.
drivers/staging/rtl8192u/r8180_93cx6.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c
b/drivers/staging/rtl8192u/r8180_93cx6.c
index fb8a7a8..97d9b3f 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -103,7 +103,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
u32 ret;
ret = 0;
- //enable EPROM programming
+ /* enable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
(EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
force_pci_posting(dev);
@@ -133,13 +133,16 @@ u32 eprom_read(struct net_device *dev, u32 addr)
eprom_send_bits_string(dev, read_cmd, 3);
eprom_send_bits_string(dev, addr_str, addr_len);
- //keep chip pin D to low state while reading.
- //I'm unsure if it is necessary, but anyway shouldn't hurt
+ /*
+ * keep chip pin D to low state while reading.
+ * I'm unsure if it is necessary, but anyway shouldn't hurt
+ */
eprom_w(dev, 0);
for (i = 0; i < 16; i++) {
- //eeprom needs a clk cycle between writing opcode&adr
- //and reading data. (eeprom outs a dummy 0)
+ /* eeprom needs a clk cycle between writing opcode&adr
+ * and reading data. (eeprom outs a dummy 0)
+ */
eprom_ck_cycle(dev);
ret |= (eprom_r(dev)<<(15-i));
}
@@ -147,7 +150,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
eprom_cs(dev, 0);
eprom_ck_cycle(dev);
- //disable EPROM programming
+ /* disable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
(EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
return ret;
--
1.7.11.7
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
