Fixed various coding sytles.
Signed-off-by: Amber Thrall <amber.rose.thr...@gmail.com>
---
drivers/staging/media/lirc/lirc_bt829.c | 2 +-
drivers/staging/media/lirc/lirc_imon.c | 4 +-
drivers/staging/media/lirc/lirc_sasem.c | 6 +--
drivers/staging/media/lirc/lirc_serial.c | 29 ++++++--------
drivers/staging/media/lirc/lirc_sir.c | 3 +-
drivers/staging/media/lirc/lirc_zilog.c | 69 +++++++++++++++-----------------
6 files changed, 52 insertions(+), 61 deletions(-)
diff --git a/drivers/staging/media/lirc/lirc_bt829.c
b/drivers/staging/media/lirc/lirc_bt829.c
index 4c806ba..c70ca68 100644
--- a/drivers/staging/media/lirc/lirc_bt829.c
+++ b/drivers/staging/media/lirc/lirc_bt829.c
@@ -59,7 +59,7 @@ static bool debug;
#define dprintk(fmt, args...) \
do { \
if (debug) \
- printk(KERN_DEBUG DRIVER_NAME ": "fmt, ## args); \
+ dev_dbg(DRIVER_NAME, ": "fmt, ##args); \
} while (0)
static int atir_minor;
diff --git a/drivers/staging/media/lirc/lirc_imon.c
b/drivers/staging/media/lirc/lirc_imon.c
index 7aca44f..bce0408 100644
--- a/drivers/staging/media/lirc/lirc_imon.c
+++ b/drivers/staging/media/lirc/lirc_imon.c
@@ -623,8 +623,8 @@ static void imon_incoming_packet(struct imon_context
*context,
if (debug) {
dev_info(dev, "raw packet: ");
for (i = 0; i < len; ++i)
- printk("%02x ", buf[i]);
- printk("\n");
+ dev_info(dev, "%02x ", buf[i]);
+ dev_info(dev, "\n");
}
/*
diff --git a/drivers/staging/media/lirc/lirc_sasem.c
b/drivers/staging/media/lirc/lirc_sasem.c
index c20ef56..e88e246 100644
--- a/drivers/staging/media/lirc/lirc_sasem.c
+++ b/drivers/staging/media/lirc/lirc_sasem.c
@@ -583,10 +583,10 @@ static void incoming_packet(struct sasem_context *context,
}
if (debug) {
- printk(KERN_INFO "Incoming data: ");
+ pr_info("Incoming data: ");
for (i = 0; i < 8; ++i)
- printk(KERN_CONT "%02x ", buf[i]);
- printk(KERN_CONT "\n");
+ pr_cont("%02x", buf[i]);
+ pr_cont("\n");
}
/*
diff --git a/drivers/staging/media/lirc/lirc_serial.c
b/drivers/staging/media/lirc/lirc_serial.c
index 181b92b..b07671b 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -116,8 +116,7 @@ static bool txsense; /* 0 = active high, 1 = active
low */
#define dprintk(fmt, args...) \
do { \
if (debug) \
- printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
- fmt, ## args); \
+ dev_dbg(LIRC_DRIVER_NAME, ": "fmt, ##args); \
} while (0)
/* forward declarations */
@@ -356,9 +355,8 @@ static int init_timing_params(unsigned int new_duty_cycle,
/* Derive pulse and space from the period */
pulse_width = period * duty_cycle / 100;
space_width = period - pulse_width;
- dprintk("in init_timing_params, freq=%d, duty_cycle=%d, "
- "clk/jiffy=%ld, pulse=%ld, space=%ld, "
- "conv_us_to_clocks=%ld\n",
+ dprintk("in init_timing_params, freq=%d, duty_cycle=%d, clk/jiffy=%ld,
+ pulse=%ld, space=%ld, conv_us_to_clocks=%ld\n",
freq, duty_cycle, __this_cpu_read(cpu_info.loops_per_jiffy),
pulse_width, space_width, conv_us_to_clocks);
return 0;
@@ -1075,7 +1073,7 @@ static int __init lirc_serial_init(void)
result = platform_driver_register(&lirc_serial_driver);
if (result) {
- printk("lirc register returned %d\n", result);
+ dprintk("lirc register returned %d\n", result);
goto exit_buffer_free;
}
@@ -1166,22 +1164,20 @@ module_init(lirc_serial_init_module);
module_exit(lirc_serial_exit_module);
MODULE_DESCRIPTION("Infra-red receiver driver for serial ports.");
-MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, "
- "Christoph Bartelmus, Andrei Tanas");
+MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph Bartelmus,
Andrei Tanas");
MODULE_LICENSE("GPL");
module_param(type, int, S_IRUGO);
-MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo,"
- " 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug,"
- " 5 = NSLU2 RX:CTS2/TX:GreenLED)");
+MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo,
+ 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug,
+ 5 = NSLU2 RX:CTS2/TX:GreenLED)");
module_param(io, int, S_IRUGO);
MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
/* some architectures (e.g. intel xscale) have memory mapped registers */
module_param(iommap, bool, S_IRUGO);
-MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O"
- " (0 = no memory mapped io)");
+MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory
mapped io)");
/*
* some architectures (e.g. intel xscale) align the 8bit serial registers
@@ -1198,13 +1194,12 @@ module_param(share_irq, bool, S_IRUGO);
MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");
module_param(sense, int, S_IRUGO);
-MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit"
- " (0 = active high, 1 = active low )");
+MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit
+ (0 = active high, 1 = active low )");
#ifdef CONFIG_LIRC_SERIAL_TRANSMITTER
module_param(txsense, bool, S_IRUGO);
-MODULE_PARM_DESC(txsense, "Sense of transmitter circuit"
- " (0 = active high, 1 = active low )");
+MODULE_PARM_DESC(txsense, "Sense of transmitter circuit (0 = active high, 1 =
active low )");
#endif
module_param(softcarrier, bool, S_IRUGO);
diff --git a/drivers/staging/media/lirc/lirc_sir.c
b/drivers/staging/media/lirc/lirc_sir.c
index 2ee55ea..cdbb71f 100644
--- a/drivers/staging/media/lirc/lirc_sir.c
+++ b/drivers/staging/media/lirc/lirc_sir.c
@@ -143,8 +143,7 @@ static bool debug;
#define dprintk(fmt, args...) \
do { \
if (debug) \
- printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
- fmt, ## args); \
+ dev_dbg(LIRC_DRIVER_NAME, ": "fmt, ## args); \
} while (0)
/* SECTION: Prototypes */
diff --git a/drivers/staging/media/lirc/lirc_zilog.c
b/drivers/staging/media/lirc/lirc_zilog.c
index 567feba..9c3a3d7 100644
--- a/drivers/staging/media/lirc/lirc_zilog.c
+++ b/drivers/staging/media/lirc/lirc_zilog.c
@@ -152,10 +152,9 @@ struct tx_data_struct {
static struct tx_data_struct *tx_data;
static struct mutex tx_data_lock;
-#define zilog_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, \
- ## args)
-#define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
-#define zilog_info(s, args...) printk(KERN_INFO KBUILD_MODNAME ": " s, ## args)
+#define zilog_notify(s, args...) dev_notice(KBUILD_MODNAME, ": " s, ## args)
+#define zilog_error(s, args...) dev_err(KBUILD_MODNAME, ": " s, ## args)
+#define zilog_info(s, args...) dev_info(KBUILD_MODNAME, ": " s, ## args)
/* module parameters */
static bool debug; /* debug output */
@@ -165,8 +164,7 @@ static int minor = -1; /* minor number */
#define dprintk(fmt, args...) \
do { \
if (debug) \
- printk(KERN_DEBUG KBUILD_MODNAME ": " fmt, \
- ## args); \
+ pr_dbg(KBUILD_MODNAME, ": " fmt, ## args); \
} while (0)
@@ -382,14 +380,14 @@ static int add_to_buf(struct IR *ir)
zilog_error("i2c_master_send failed with %d\n", ret);
if (failures >= 3) {
mutex_unlock(&ir->ir_lock);
- zilog_error("unable to read from the IR chip "
- "after 3 resets, giving up\n");
+ zilog_error("unable to read from the IR chip
+ after 3 resets, giving up\n");
break;
}
/* Looks like the chip crashed, reset it */
- zilog_error("polling the IR receiver chip failed, "
- "trying reset\n");
+ zilog_error("polling the IR receiver chip failed,
+ trying reset\n");
set_current_state(TASK_UNINTERRUPTIBLE);
if (kthread_should_stop()) {
@@ -415,8 +413,8 @@ static int add_to_buf(struct IR *ir)
ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf));
mutex_unlock(&ir->ir_lock);
if (ret != sizeof(keybuf)) {
- zilog_error("i2c_master_recv failed with %d -- "
- "keeping last read buffer\n", ret);
+ zilog_error("i2c_master_recv failed with %d --
+ keeping last read buffer\n", ret);
} else {
rx->b[0] = keybuf[3];
rx->b[1] = keybuf[4];
@@ -720,8 +718,8 @@ static int send_boot_data(struct IR_tx *tx)
zilog_error("unexpected IR TX init response: %02x\n", buf[0]);
return 0;
}
- zilog_notify("Zilog/Hauppauge IR blaster firmware version "
- "%d.%d.%d loaded\n", buf[1], buf[2], buf[3]);
+ zilog_notify("Zilog/Hauppauge IR blaster firmware version
+ %d.%d.%d loaded\n", buf[1], buf[2], buf[3]);
return 0;
}
@@ -803,9 +801,8 @@ static int fw_load(struct IR_tx *tx)
if (!read_uint8(&data, tx_data->endp, &version))
goto corrupt;
if (version != 1) {
- zilog_error("unsupported code set file version (%u, expected"
- "1) -- please upgrade to a newer driver",
- version);
+ zilog_error("unsupported code set file version (%u, expected
+ 1) -- please upgrade to a newer driver", version);
fw_unload_locked();
ret = -EFAULT;
goto out;
@@ -990,8 +987,8 @@ static int send_code(struct IR_tx *tx, unsigned int code,
unsigned int key)
ret = get_key_data(data_block, code, key);
if (ret == -EPROTO) {
- zilog_error("failed to get data for code %u, key %u -- check "
- "lircd.conf entries\n", code, key);
+ zilog_error("failed to get data for code %u, key %u -- check
+ lircd.conf entries\n", code, key);
return ret;
} else if (ret != 0)
return ret;
@@ -1066,12 +1063,12 @@ static int send_code(struct IR_tx *tx, unsigned int
code, unsigned int key)
ret = i2c_master_send(tx->c, buf, 1);
if (ret == 1)
break;
- dprintk("NAK expected: i2c_master_send "
- "failed with %d (try %d)\n", ret, i+1);
+ dprintk("NAK expected: i2c_master_send
+ failed with %d (try %d)\n", ret, i+1);
}
if (ret != 1) {
- zilog_error("IR TX chip never got ready: last i2c_master_send "
- "failed with %d\n", ret);
+ zilog_error("IR TX chip never got ready: last i2c_master_send
+ failed with %d\n", ret);
return ret < 0 ? ret : -EFAULT;
}
@@ -1173,12 +1170,12 @@ static ssize_t write(struct file *filep, const char
__user *buf, size_t n,
*/
if (ret != 0) {
/* Looks like the chip crashed, reset it */
- zilog_error("sending to the IR transmitter chip "
- "failed, trying reset\n");
+ zilog_error("sending to the IR transmitter chip
+ failed, trying reset\n");
if (failures >= 3) {
- zilog_error("unable to send to the IR chip "
- "after 3 resets, giving up\n");
+ zilog_error("unable to send to the IR chip
+ after 3 resets, giving up\n");
mutex_unlock(&ir->ir_lock);
mutex_unlock(&tx->client_lock);
put_ir_tx(tx, false);
@@ -1547,8 +1544,8 @@ static int ir_probe(struct i2c_client *client, const
struct i2c_device_id *id)
/* Proceed only if the Rx client is also ready or not needed */
if (rx == NULL && !tx_only) {
- zilog_info("probe of IR Tx on %s (i2c-%d) done. Waiting"
- " on IR Rx.\n", adap->name, adap->nr);
+ zilog_info("probe of IR Tx on %s (i2c-%d) done. Waiting
+ on IR Rx.\n", adap->name, adap->nr);
goto out_ok;
}
} else {
@@ -1586,8 +1583,8 @@ static int ir_probe(struct i2c_client *client, const
struct i2c_device_id *id)
"zilog-rx-i2c-%d", adap->nr);
if (IS_ERR(rx->task)) {
ret = PTR_ERR(rx->task);
- zilog_error("%s: could not start IR Rx polling thread"
- "\n", __func__);
+ zilog_error("%s: could not start IR Rx polling thread
+ \n", __func__);
/* Failed kthread, so put back the ir ref */
put_ir_device(ir, true);
/* Failure exit, so put back rx ref from i2c_client */
@@ -1599,8 +1596,8 @@ static int ir_probe(struct i2c_client *client, const
struct i2c_device_id *id)
/* Proceed only if the Tx client is also ready */
if (tx == NULL) {
- zilog_info("probe of IR Rx on %s (i2c-%d) done. Waiting"
- " on IR Tx.\n", adap->name, adap->nr);
+ zilog_info("probe of IR Rx on %s (i2c-%d) done. Waiting
+ on IR Tx.\n", adap->name, adap->nr);
goto out_ok;
}
}
@@ -1674,9 +1671,9 @@ module_init(zilog_init);
module_exit(zilog_exit);
MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)");
-MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, "
- "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver, "
- "Andy Walls");
+MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus,
+ Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver,
+ Andy Walls");
MODULE_LICENSE("GPL");
/* for compat with old name, which isn't all that accurate anymore */
MODULE_ALIAS("lirc_pvr150");
--
2.1.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
