The devpriv->mode is set to '0' at the start of apci3120_ai_insn_read() and
apci3120_cyclic_ai(). There is no need to clear any of the bits or do any
of the additional writes of those cleared bits.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
.../comedi/drivers/addi-data/hwdrv_apci3120.c | 23 ----------------------
1 file changed, 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index fcb92e8..c58d4a6 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -251,13 +251,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev,
/* Initialize Timer 0 mode 4 */
apci3120_timer_set_mode(dev, 0, APCI3120_TIMER_MODE4);
- /* Reset the scan bit and Disables the EOS, DMA, EOC
interrupt */
- devpriv->mode &= APCI3120_DISABLE_SCAN;
-
if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {
-
- /* Disables the EOS,DMA and enables the EOC
interrupt */
- devpriv->mode &= APCI3120_DISABLE_EOS_INT;
devpriv->mode |= APCI3120_ENABLE_EOC_INT;
inw(dev->iobase + 0);
}
@@ -312,11 +306,8 @@ static int apci3120_ai_insn_read(struct comedi_device *dev,
/* If Interrupt function is loaded */
if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) {
- /* Disables the EOC,DMA and enables the EOS
interrupt */
- devpriv->mode &= APCI3120_DISABLE_EOC_INT;
devpriv->mode |= APCI3120_ENABLE_EOS_INT;
inw(dev->iobase + 0);
-
}
outb(devpriv->mode,
@@ -563,8 +554,6 @@ static int apci3120_cyclic_ai(int mode,
}
- /* common for all modes */
- devpriv->mode &= APCI3120_DISABLE_SCAN;
outb(devpriv->mode, dev->iobase + APCI3120_WRITE_MODE_SELECT);
/* If DMA is disabled */
@@ -573,18 +562,12 @@ static int apci3120_cyclic_ai(int mode,
devpriv->b_InterruptMode = APCI3120_EOS_MODE;
devpriv->b_EocEosInterrupt = APCI3120_ENABLE;
- devpriv->mode &= APCI3120_DISABLE_EOC_INT;
devpriv->mode |= APCI3120_ENABLE_EOS_INT;
outb(devpriv->mode, dev->iobase + APCI3120_WRITE_MODE_SELECT);
if (cmd->stop_src == TRIG_COUNT) {
/* configure Timer2 For counting EOS */
- /* DISABLE TIMER intERRUPT */
- devpriv->mode &= APCI3120_DISABLE_TIMER_INT & 0xef;
- outb(devpriv->mode,
- dev->iobase + APCI3120_WRITE_MODE_SELECT);
-
/* (1) Init timer 2 in mode 0 and write timer value */
apci3120_timer_set_mode(dev, 2, APCI3120_TIMER_MODE0);
@@ -594,7 +577,6 @@ static int apci3120_cyclic_ai(int mode,
apci3120_clr_timer2_interrupt(dev);
/* enable timer counter and disable watch dog */
- devpriv->mode &= APCI3120_DISABLE_WATCHDOG;
devpriv->mode |= APCI3120_ENABLE_TIMER_COUNTER;
/* select EOS clock input for timer 2 */
devpriv->mode |= APCI3120_TIMER2_SELECT_EOS;
@@ -615,11 +597,6 @@ static int apci3120_cyclic_ai(int mode,
devpriv->b_InterruptMode = APCI3120_DMA_MODE;
- /* Disables the EOC, EOS interrupt */
- devpriv->mode &= APCI3120_DISABLE_EOC_INT &
- APCI3120_DISABLE_EOS_INT;
- outb(devpriv->mode, dev->iobase + APCI3120_WRITE_MODE_SELECT);
-
dmalen0 = dmabuf0->size;
dmalen1 = dmabuf1->size;
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
