On Mon, Dec 22, 2014 at 02:23:42AM +0100, Helene Gsaenger wrote: > Signed-off-by: Helene Gsaenger <helene.gsaen...@studium.fau.de> > Signed-off-by: Simone Weiss <simone.we...@fau.de> > --- > drivers/staging/iio/accel/adis16203.h | 41 > ++++++++++++++++++++++++++--------- > 1 file changed, 31 insertions(+), 10 deletions(-) > > diff --git a/drivers/staging/iio/accel/adis16203.h > b/drivers/staging/iio/accel/adis16203.h > index acc688d..fefe2f9 100644 > --- a/drivers/staging/iio/accel/adis16203.h > +++ b/drivers/staging/iio/accel/adis16203.h > @@ -16,26 +16,47 @@ > #define ADIS16203_ALM_SMPL2 0x26 /* Alarm 2, sample period */ > #define ADIS16203_ALM_CTRL 0x28 /* Alarm control */ > #define ADIS16203_AUX_DAC 0x30 /* Auxiliary DAC data */ > -#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital > input/output control */ > +#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output > + * control */ > #define ADIS16203_MSC_CTRL 0x34 /* Miscellaneous control */ > -#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) > control */ > +#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) > + * control */
this is not the style for multiline comments. Check in CodingStyle. and besides, I think it will be better if you can put the comments in a line of its own. thanks sudip > #define ADIS16203_AVG_CNT 0x38 /* Operation, filter configuration */ > #define ADIS16203_SLP_CNT 0x3A /* Operation, sleep mode control */ > #define ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register > */ > #define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register > */ > > /* MSC_CTRL */ > -#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at > power-on: 1 = disabled, 0 = enabled */ > -#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation > of both inclination outputs */ > +#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at > + * power-on: > + * 1 = disabled, > + * 0 = enabled */ > +#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation > + * of both > + * inclination > + * outputs */ > #define ADIS16203_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test > enable */ > -#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready > enable: 1 = enabled, 0 = disabled */ > -#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready > polarity: 1 = active high, 0 = active low */ > -#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line > selection: 1 = DIO1, 0 = DIO0 */ > +#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready > enable: > + * 1 = enabled, > + * 0 = disabled */ > +#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready > + * polarity: > + * 1 = active high, > + * 0 = active low */ > +#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line > + * selection: > + * 1 = DIO1, > + * 0 = DIO0 */ > > /* DIAG_STAT */ > -#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = > alarm active, 0 = alarm inactive */ > -#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = > alarm active, 0 = alarm inactive */ > -#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic > error flag */ > +#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: > + * 1 = alarm active, > + * 0 = alarm inactive */ > +#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: > + * 1 = alarm active, > + * 0 = alarm inactive */ > +#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error > + * flag */ > #define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications > failure */ > #define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */ > #define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 > V */ > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
