On 12/31, Lorenzo Stoakes wrote:
> This patch fixes errors raised by checkpatch.pl relating to use of C99
> comments
> in r8192U_dm.c.
>
> Signed-off-by: Lorenzo Stoakes <lstoa...@gmail.com>
> ---
> drivers/staging/rtl8192u/r8192U_dm.c | 841
> ++++++++++++++++++-----------------
> 1 file changed, 432 insertions(+), 409 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/r8192U_dm.c
> b/drivers/staging/rtl8192u/r8192U_dm.c
> index 936565d..44f4c38 100644
> --- a/drivers/staging/rtl8192u/r8192U_dm.c
> +++ b/drivers/staging/rtl8192u/r8192U_dm.c
> @@ -21,14 +21,15 @@ Major Change History:
> #include "r8190_rtl8256.h"
> #include "r819xU_cmdpkt.h"
> /*---------------------------Define Local
> Constant---------------------------*/
> -//
> -// Indicate different AP vendor for IOT issue.
> -//
> -static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
> - { 0x5e4322, 0x5e4322, 0x5e4322, 0x604322,
> 0xa44f, 0x5ea44f};
> -static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
> - { 0x5e4322, 0xa44f, 0x5e4322, 0x604322,
> 0x5ea44f, 0x5ea44f};
> -
> +/*
> + * Indicate different AP vendor for IOT issue.
> + */
> +static u32 edca_setting_DL[HT_IOT_PEER_MAX] = {
> + 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f
> +};
> +static u32 edca_setting_UL[HT_IOT_PEER_MAX] = {
> + 0x5e4322, 0xa44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f
> +};
You also fix the line length here which shall be the subject of a
separate patch as this is not C99 comments related change.
Thanks,
Konrad
> #define RTK_UL_EDCA 0xa44f
> #define RTK_DL_EDCA 0x5e4322
> @@ -36,11 +37,11 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
>
>
> /*------------------------Define global
> variable-----------------------------*/
> -// Debug variable ?
> +/* Debug variable ? */
> dig_t dm_digtable;
> -// Store current software write register content for MAC PHY.
> +/* Store current software write register content for MAC PHY. */
> u8 dm_shadow[16][256] = {{0}};
> -// For Dynamic Rx Path Selection by Signal Strength
> +/* For Dynamic Rx Path Selection by Signal Strength */
> DRxPathSel DM_RxPathSelTable;
> /*------------------------Define global
> variable-----------------------------*/
>
> @@ -56,24 +57,24 @@ extern void dm_check_fsync(struct net_device *dev);
>
>
> /*---------------------Define local function
> prototype-----------------------*/
> -// DM --> Rate Adaptive
> +/* DM --> Rate Adaptive */
> static void dm_check_rate_adaptive(struct net_device *dev);
>
> -// DM --> Bandwidth switch
> +/* DM --> Bandwidth switch */
> static void dm_init_bandwidth_autoswitch(struct net_device *dev);
> static void dm_bandwidth_autoswitch(struct net_device *dev);
>
> -// DM --> TX power control
> -//static void dm_initialize_txpower_tracking(struct net_device *dev);
> +/* DM --> TX power control */
> +/*static void dm_initialize_txpower_tracking(struct net_device
> *dev);*/
>
> static void dm_check_txpower_tracking(struct net_device *dev);
>
>
>
> -//static void dm_txpower_reset_recovery(struct net_device *dev);
> +/*static void dm_txpower_reset_recovery(struct net_device *dev);*/
>
>
> -// DM --> Dynamic Init Gain by RSSI
> +/* DM --> Dynamic Init Gain by RSSI */
> static void dm_dig_init(struct net_device *dev);
> static void dm_ctrl_initgain_byrssi(struct net_device *dev);
> static void dm_ctrl_initgain_byrssi_highpwr(struct net_device *dev);
> @@ -84,61 +85,61 @@ static void dm_pd_th(struct net_device *dev);
> static void dm_cs_ratio(struct net_device *dev);
>
> static void dm_init_ctstoself(struct net_device *dev);
> -// DM --> EDCA turbo mode control
> +/* DM --> EDCA turbo mode control */
> static void dm_check_edca_turbo(struct net_device *dev);
>
> -//static void dm_gpio_change_rf(struct net_device *dev);
> -// DM --> Check PBC
> +/*static void dm_gpio_change_rf(struct net_device *dev);*/
> +/* DM --> Check PBC */
> static void dm_check_pbc_gpio(struct net_device *dev);
>
>
> -// DM --> Check current RX RF path state
> +/* DM --> Check current RX RF path state */
> static void dm_check_rx_path_selection(struct net_device *dev);
> static void dm_init_rxpath_selection(struct net_device *dev);
> static void dm_rxpath_sel_byrssi(struct net_device *dev);
>
>
> -// DM --> Fsync for broadcom ap
> +/* DM --> Fsync for broadcom ap */
> static void dm_init_fsync(struct net_device *dev);
> static void dm_deInit_fsync(struct net_device *dev);
>
> -//Added by vivi, 20080522
> +/* Added by vivi, 20080522 */
> static void dm_check_txrateandretrycount(struct net_device *dev);
>
> /*---------------------Define local function
> prototype-----------------------*/
>
> -/*---------------------Define of Tx Power Control For Near/Far Range
> --------*/ //Add by Jacken 2008/02/18
> +/*---------------------Define of Tx Power Control For Near/Far Range
> --------*/ /*Add by Jacken 2008/02/18 */
> static void dm_init_dynamic_txpower(struct net_device *dev);
> static void dm_dynamic_txpower(struct net_device *dev);
>
>
> -// DM --> For rate adaptive and DIG, we must send RSSI to firmware
> +/* DM --> For rate adaptive and DIG, we must send RSSI to firmware */
> static void dm_send_rssi_tofw(struct net_device *dev);
> static void dm_ctstoself(struct net_device *dev);
> /*---------------------------Define function
> prototype------------------------*/
> -//================================================================================
> -// HW Dynamic mechanism interface.
> -//================================================================================
> -
> -//
> -// Description:
> -// Prepare SW resource for HW dynamic mechanism.
> -//
> -// Assumption:
> -// This function is only invoked at driver intialization once.
> -//
> -//
> +/*
> + *
> ================================================================================
> + * HW Dynamic mechanism interface.
> + *
> ================================================================================
> + *
> + *
> + * Description:
> + * Prepare SW resource for HW dynamic mechanism.
> + *
> + * Assumption:
> + * This function is only invoked at driver intialization once.
> + */
> void init_hal_dm(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - // Undecorated Smoothed Signal Strength, it can utilized to dynamic
> mechanism.
> + /* Undecorated Smoothed Signal Strength, it can utilized to dynamic
> mechanism. */
> priv->undecorated_smoothed_pwdb = -1;
>
> - //Initial TX Power Control for near/far range , add by amy 2008/05/15,
> porting from windows code.
> + /* Initial TX Power Control for near/far range , add by amy 2008/05/15,
> porting from windows code. */
> dm_init_dynamic_txpower(dev);
> init_rate_adaptive(dev);
> - //dm_initialize_txpower_tracking(dev);
> + /*dm_initialize_txpower_tracking(dev);*/
> dm_dig_init(dev);
> dm_init_edca_turbo(dev);
> dm_init_bandwidth_autoswitch(dev);
> @@ -146,7 +147,7 @@ void init_hal_dm(struct net_device *dev)
> dm_init_rxpath_selection(dev);
> dm_init_ctstoself(dev);
>
> -} // InitHalDm
> +} /* InitHalDm */
>
> void deinit_hal_dm(struct net_device *dev)
> {
> @@ -208,16 +209,16 @@ void dm_CheckRxAggregation(struct net_device *dev) {
>
> lastTxOkCnt = priv->stats.txbytesunicast;
> lastRxOkCnt = priv->stats.rxbytesunicast;
> -} // dm_CheckEdcaTurbo
> +} /* dm_CheckEdcaTurbo */
> #endif
>
>
>
> void hal_dm_watchdog(struct net_device *dev)
> {
> - //struct r8192_priv *priv = ieee80211_priv(dev);
> + /*struct r8192_priv *priv = ieee80211_priv(dev);*/
>
> - //static u8 previous_bssid[6] ={0};
> + /*static u8 previous_bssid[6] ={0};*/
>
> /*Add by amy 2008/05/15 ,porting from windows code.*/
> dm_check_rate_adaptive(dev);
> @@ -230,22 +231,22 @@ void hal_dm_watchdog(struct net_device *dev)
> dm_check_rx_path_selection(dev);
> dm_check_fsync(dev);
>
> - // Add by amy 2008-05-15 porting from windows code.
> + /* Add by amy 2008-05-15 porting from windows code. */
> dm_check_pbc_gpio(dev);
> dm_send_rssi_tofw(dev);
> dm_ctstoself(dev);
> #ifdef USB_RX_AGGREGATION_SUPPORT
> dm_CheckRxAggregation(dev);
> #endif
> -} //HalDmWatchDog
> +} /* HalDmWatchDog */
>
>
> /*
> - * Decide Rate Adaptive Set according to distance (signal strength)
> - * 01/11/2008 MHC Modify input arguments and RATR table
> level.
> - * 01/16/2008 MHC RF_Type is assigned in
> ReadAdapterInfo(). We must call
> - * the function after making sure
> RF_Type.
> - */
> + * Decide Rate Adaptive Set according to distance (signal strength)
> + * 01/11/2008 MHC Modify input arguments and RATR table
> level.
> + * 01/16/2008 MHC RF_Type is assigned in
> ReadAdapterInfo(). We must call
> + * the function after making sure
> RF_Type.
> + */
> void init_rate_adaptive(struct net_device *dev)
> {
>
> @@ -270,14 +271,16 @@ void init_rate_adaptive(struct net_device *dev)
>
> if (priv->rf_type == RF_2T4R)
> {
> - // 07/10/08 MH Modify for RA smooth scheme.
> - /* 2008/01/11 MH Modify 2T RATR table for different RSSI.
> 080515 porting by amy from windows code.*/
> + /*
> + * 07/10/08 MH Modify for RA smooth scheme.
> + * 2008/01/11 MH Modify 2T RATR table for different RSSI.
> 080515 porting by amy from windows code.
> + */
> pra->upper_rssi_threshold_ratr = 0x8f0f0000;
> pra->middle_rssi_threshold_ratr = 0x8f0ff000;
> pra->low_rssi_threshold_ratr = 0x8f0ff001;
> pra->low_rssi_threshold_ratr_40M = 0x8f0ff005;
> pra->low_rssi_threshold_ratr_20M = 0x8f0ff001;
> - pra->ping_rssi_ratr = 0x0000000d;//cosa add for test
> + pra->ping_rssi_ratr = 0x0000000d;/* cosa add for test
> */
> }
> else if (priv->rf_type == RF_1T2R)
> {
> @@ -286,10 +289,10 @@ void init_rate_adaptive(struct net_device *dev)
> pra->low_rssi_threshold_ratr = 0x000ff001;
> pra->low_rssi_threshold_ratr_40M = 0x000ff005;
> pra->low_rssi_threshold_ratr_20M = 0x000ff001;
> - pra->ping_rssi_ratr = 0x0000000d;//cosa add for test
> + pra->ping_rssi_ratr = 0x0000000d;/* cosa add for test
> */
> }
>
> -} // InitRateAdaptive
> +} /* InitRateAdaptive */
>
>
>
> /*-----------------------------------------------------------------------------
> @@ -325,21 +328,21 @@ static void dm_check_rate_adaptive(struct net_device
> *dev)
> return;
> }
>
> - if(pra->rate_adaptive_disabled)//this variable is set by ioctl.
> + if(pra->rate_adaptive_disabled) /* this variable is set by ioctl. */
> return;
>
> - // TODO: Only 11n mode is implemented currently,
> + /* TODO: Only 11n mode is implemented currently, */
> if(!(priv->ieee80211->mode == WIRELESS_MODE_N_24G ||
> priv->ieee80211->mode == WIRELESS_MODE_N_5G))
> return;
>
> if(priv->ieee80211->state == IEEE80211_LINKED)
> {
> - // RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");
> + /*RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");*/
>
> - //
> - // Check whether Short GI is enabled
> - //
> + /*
> + * Check whether Short GI is enabled
> + */
> bshort_gi_enabled = (pHTInfo->bCurTxBW40MHz &&
> pHTInfo->bCurShortGI40MHz) ||
> (!pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI20MHz);
>
> @@ -360,7 +363,7 @@ static void dm_check_rate_adaptive(struct net_device *dev)
> pra->low_rssi_threshold_ratr =
> (pra->low_rssi_threshold_ratr_20M & (~BIT31)) |
> ((bshort_gi_enabled)? BIT31:0) ;
> }
> - //cosa add for test
> + /* cosa add for test */
> pra->ping_rssi_ratr =
> (pra->ping_rssi_ratr & (~BIT31)) |
> ((bshort_gi_enabled)? BIT31:0) ;
>
> @@ -387,56 +390,57 @@ static void dm_check_rate_adaptive(struct net_device
> *dev)
>
> (pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
> }
>
> - //DbgPrint("[DM] THresh H/L=%d/%d\n\r",
> RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);
> + /*DbgPrint("[DM] THresh H/L=%d/%d\n\r",
> RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);*/
> if(priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA)
> {
> - //DbgPrint("[DM] RSSI=%d STA=HIGH\n\r",
> pHalData->UndecoratedSmoothedPWDB);
> + /*DbgPrint("[DM] RSSI=%d STA=HIGH\n\r",
> pHalData->UndecoratedSmoothedPWDB);*/
> pra->ratr_state = DM_RATR_STA_HIGH;
> targetRATR = pra->upper_rssi_threshold_ratr;
> }else if(priv->undecorated_smoothed_pwdb >=
> (long)LowRSSIThreshForRA)
> {
> - //DbgPrint("[DM] RSSI=%d STA=Middle\n\r",
> pHalData->UndecoratedSmoothedPWDB);
> + /*DbgPrint("[DM] RSSI=%d STA=Middle\n\r",
> pHalData->UndecoratedSmoothedPWDB);*/
> pra->ratr_state = DM_RATR_STA_MIDDLE;
> targetRATR = pra->middle_rssi_threshold_ratr;
> }else
> {
> - //DbgPrint("[DM] RSSI=%d STA=LOW\n\r",
> pHalData->UndecoratedSmoothedPWDB);
> + /*DbgPrint("[DM] RSSI=%d STA=LOW\n\r",
> pHalData->UndecoratedSmoothedPWDB);*/
> pra->ratr_state = DM_RATR_STA_LOW;
> targetRATR = pra->low_rssi_threshold_ratr;
> }
>
> - //cosa add for test
> - if(pra->ping_rssi_enable)
> - {
> - //pHalData->UndecoratedSmoothedPWDB = 19;
> + /* cosa add for test */
> + if(pra->ping_rssi_enable) {
> + /*pHalData->UndecoratedSmoothedPWDB = 19;*/
> if(priv->undecorated_smoothed_pwdb <
> (long)(pra->ping_rssi_thresh_for_ra+5))
> {
> if((priv->undecorated_smoothed_pwdb <
> (long)pra->ping_rssi_thresh_for_ra) ||
> ping_rssi_state)
> {
> - //DbgPrint("TestRSSI = %d, set RATR to
> 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);
> + /*DbgPrint("TestRSSI = %d, set RATR to
> 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);*/
> pra->ratr_state = DM_RATR_STA_LOW;
> targetRATR = pra->ping_rssi_ratr;
> ping_rssi_state = 1;
> }
> - //else
> - // DbgPrint("TestRSSI is between the
> range. \n");
> + /*else
> + DbgPrint("TestRSSI is between the
> range. \n");*/
> }
> else
> {
> - //DbgPrint("TestRSSI Recover to 0x%x \n",
> targetRATR);
> + /*DbgPrint("TestRSSI Recover to 0x%x \n",
> targetRATR);*/
> ping_rssi_state = 0;
> }
> }
>
> - // 2008.04.01
> - // For RTL819X, if pairwisekey = wep/tkip, we support only
> MCS0~7.
> + /*
> + * 2008.04.01
> + * For RTL819X, if pairwisekey = wep/tkip, we support only
> MCS0~7.
> + */
> if(priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev))
> targetRATR &= 0xf00fffff;
>
> - //
> - // Check whether updating of RATR0 is required
> - //
> + /*
> + * Check whether updating of RATR0 is required
> + */
> read_nic_dword(dev, RATR0, ¤tRATR);
> if(targetRATR != currentRATR)
> {
> @@ -459,7 +463,7 @@ static void dm_check_rate_adaptive(struct net_device *dev)
> pra->ratr_state = DM_RATR_STA_MAX;
> }
>
> -} // dm_CheckRateAdaptive
> +} /* dm_CheckRateAdaptive */
>
>
> static void dm_init_bandwidth_autoswitch(struct net_device *dev)
> @@ -471,7 +475,7 @@ static void dm_init_bandwidth_autoswitch(struct
> net_device *dev)
> priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
> priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable = false;
>
> -} // dm_init_bandwidth_autoswitch
> +} /* dm_init_bandwidth_autoswitch */
>
>
> static void dm_bandwidth_autoswitch(struct net_device *dev)
> @@ -481,68 +485,68 @@ static void dm_bandwidth_autoswitch(struct net_device
> *dev)
> if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20
> ||!priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable){
> return;
> }else{
> - if(priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz ==
> false){//If send packets in 40 Mhz in 20/40
> + if(priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz ==
> false){ /* If send packets in 40 Mhz in 20/40 */
> if(priv->undecorated_smoothed_pwdb <=
> priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
>
> priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
> - }else{//in force send packets in 20 Mhz in 20/40
> + }else{ /* in force send packets in 20 Mhz in 20/40 */
> if(priv->undecorated_smoothed_pwdb >=
> priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
>
> priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
>
> }
> }
> -} // dm_BandwidthAutoSwitch
> +} /* dm_BandwidthAutoSwitch */
>
> -//OFDM default at 0db, index=6.
> +/* OFDM default at 0db, index=6. */
> static u32 OFDMSwingTable[OFDM_Table_Length] = {
> - 0x7f8001fe, // 0, +6db
> - 0x71c001c7, // 1, +5db
> - 0x65400195, // 2, +4db
> - 0x5a400169, // 3, +3db
> - 0x50800142, // 4, +2db
> - 0x47c0011f, // 5, +1db
> - 0x40000100, // 6, +0db ===> default, upper for higher temperature,
> lower for low temperature
> - 0x390000e4, // 7, -1db
> - 0x32c000cb, // 8, -2db
> - 0x2d4000b5, // 9, -3db
> - 0x288000a2, // 10, -4db
> - 0x24000090, // 11, -5db
> - 0x20000080, // 12, -6db
> - 0x1c800072, // 13, -7db
> - 0x19800066, // 14, -8db
> - 0x26c0005b, // 15, -9db
> - 0x24400051, // 16, -10db
> - 0x12000048, // 17, -11db
> - 0x10000040 // 18, -12db
> + 0x7f8001fe, /* 0, +6db */
> + 0x71c001c7, /* 1, +5db */
> + 0x65400195, /* 2, +4db */
> + 0x5a400169, /* 3, +3db */
> + 0x50800142, /* 4, +2db */
> + 0x47c0011f, /* 5, +1db */
> + 0x40000100, /* 6, +0db ===> default, upper for higher temperature,
> lower for low temperature */
> + 0x390000e4, /* 7, -1db */
> + 0x32c000cb, /* 8, -2db */
> + 0x2d4000b5, /* 9, -3db */
> + 0x288000a2, /* 10, -4db */
> + 0x24000090, /* 11, -5db */
> + 0x20000080, /* 12, -6db */
> + 0x1c800072, /* 13, -7db */
> + 0x19800066, /* 14, -8db */
> + 0x26c0005b, /* 15, -9db */
> + 0x24400051, /* 16, -10db */
> + 0x12000048, /* 17, -11db */
> + 0x10000040 /* 18, -12db */
> };
>
> static u8 CCKSwingTable_Ch1_Ch13[CCK_Table_length][8] = {
> - {0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04}, // 0, +0db ===>
> CCK40M default
> - {0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03}, // 1, -1db
> - {0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03}, // 2, -2db
> - {0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03}, // 3, -3db
> - {0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02}, // 4, -4db
> - {0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02}, // 5, -5db
> - {0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02}, // 6, -6db ===>
> CCK20M default
> - {0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02}, // 7, -7db
> - {0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01}, // 8, -8db
> - {0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01}, // 9, -9db
> - {0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, // 10, -10db
> - {0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01} // 11, -11db
> + {0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04}, /* 0, +0db ===>
> CCK40M default */
> + {0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03}, /* 1, -1db */
> + {0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03}, /* 2, -2db */
> + {0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03}, /* 3, -3db */
> + {0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02}, /* 4, -4db */
> + {0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02}, /* 5, -5db */
> + {0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02}, /* 6, -6db ===>
> CCK20M default */
> + {0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02}, /* 7, -7db */
> + {0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01}, /* 8, -8db */
> + {0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01}, /* 9, -9db */
> + {0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, /* 10, -10db */
> + {0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01} /* 11, -11db */
> };
>
> static u8 CCKSwingTable_Ch14[CCK_Table_length][8] = {
> - {0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00}, // 0, +0db
> ===> CCK40M default
> - {0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00}, // 1, -1db
> - {0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00}, // 2, -2db
> - {0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00}, // 3, -3db
> - {0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00}, // 4, -4db
> - {0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00}, // 5, -5db
> - {0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00}, // 6, -6db
> ===> CCK20M default
> - {0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00}, // 7, -7db
> - {0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00}, // 8, -8db
> - {0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00}, // 9, -9db
> - {0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, // 10, -10db
> - {0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00} // 11, -11db
> + {0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00}, /* 0, +0db
> ===> CCK40M default */
> + {0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00}, /* 1, -1db */
> + {0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00}, /* 2, -2db */
> + {0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00}, /* 3, -3db */
> + {0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00}, /* 4, -4db */
> + {0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00}, /* 5, -5db */
> + {0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00}, /* 6, -6db
> ===> CCK20M default */
> + {0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00}, /* 7, -7db */
> + {0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00}, /* 8, -8db */
> + {0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00}, /* 9, -9db */
> + {0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, /* 10, -10db */
> + {0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00} /* 11, -11db */
> };
>
> static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
> @@ -556,7 +560,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct
> net_device *dev)
> u32 Value;
> u8 Pwr_Flag;
> u16 Avg_TSSI_Meas,
> TSSI_13dBm, Avg_TSSI_Meas_from_driver=0;
> - //RT_STATUS rtStatus = RT_STATUS_SUCCESS;
> + /*RT_STATUS rtStatus = RT_STATUS_SUCCESS;*/
> bool rtStatus = true;
> u32 delta=0;
>
> @@ -571,9 +575,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct
> net_device *dev)
>
> RT_TRACE(COMP_POWER_TRACKING, "powerlevelOFDM24G = %x\n",
> powerlevelOFDM24G);
>
> - for(j = 0; j<=30; j++)
> -{ //fill tx_cmd
> -
> + for(j = 0; j<=30; j++) { /* fill tx_cmd */
> tx_cmd.Op = TXCMD_SET_TX_PWR_TRACKING;
> tx_cmd.Length = 4;
> tx_cmd.Value = Value;
> @@ -583,7 +585,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct
> net_device *dev)
> RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd
> queue fail!\n");
> }
> mdelay(1);
> - //DbgPrint("hi, vivi, strange\n");
> + /*DbgPrint("hi, vivi, strange\n");*/
> for(i = 0;i <= 30; i++)
> {
> read_nic_byte(dev, 0x1ba, &Pwr_Flag);
> @@ -609,7 +611,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct
> net_device *dev)
> RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value =
> %d\n", tmp_report[k]);
> }
>
> - //check if the report value is right
> + /* check if the report value is right */
> for(k = 0;k < 5; k++)
> {
> if(tmp_report[k] <= 20)
> @@ -638,8 +640,8 @@ static void dm_TXPowerTrackingCallback_TSSI(struct
> net_device *dev)
> TSSI_13dBm = priv->TSSI_13dBm;
> RT_TRACE(COMP_POWER_TRACKING, "TSSI_13dBm = %d\n", TSSI_13dBm);
>
> - //if(abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <=
> E_FOR_TX_POWER_TRACK)
> - // For MacOS-compatible
> + /*if(abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <=
> E_FOR_TX_POWER_TRACK)*/
> + /* For MacOS-compatible */
> if(Avg_TSSI_Meas_from_driver > TSSI_13dBm)
> delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm;
> else
> @@ -741,9 +743,9 @@ static void
> dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
>
> if(!priv->btxpower_trackingInit)
> {
> - //Query OFDM default setting
> + /* Query OFDM default setting */
> tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance,
> bMaskDWord);
> - for(i=0; i<OFDM_Table_Length; i++) //find the index
> + for(i=0; i<OFDM_Table_Length; i++) /* find the index */
> {
> if(tmpRegA == OFDMSwingTable[i])
> {
> @@ -753,7 +755,7 @@ static void
> dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
> }
> }
>
> - //Query CCK default setting From 0xa22
> + /* Query CCK default setting From 0xa22 */
> TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
> for(i=0 ; i<CCK_Table_length ; i++)
> {
> @@ -766,27 +768,28 @@ static void
> dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
> }
> }
> priv->btxpower_trackingInit = TRUE;
> - //pHalData->TXPowercount = 0;
> + /*pHalData->TXPowercount = 0;*/
> return;
> }
>
> - //==========================
> - // this is only for test, should be masked
> - //==========================
> + /*==========================
> + * this is only for test, should be masked
> + *==========================
> + */
>
> - // read and filter out unreasonable value
> - tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078);
> // 0x12: RF Reg[10:7]
> + /* read and filter out unreasonable value */
> + tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078);
> /* 0x12: RF Reg[10:7] */
> RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n",
> tmpRegA);
> if(tmpRegA < 3 || tmpRegA > 13)
> return;
> - if(tmpRegA >= 12) // if over 12, TP will be bad when high
> temperature
> + if(tmpRegA >= 12) /* if over 12, TP will be bad when high
> temperature */
> tmpRegA = 12;
> RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
> - priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by
> Bryant's suggestion
> - priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by
> Bryant's suggestion
> + priv->ThermalMeter[0] = ThermalMeterVal; /* We use fixed value
> by Bryant's suggestion */
> + priv->ThermalMeter[1] = ThermalMeterVal; /* We use fixed value
> by Bryant's suggestion */
>
> - //Get current RF-A temperature index
> - if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temperature
> + /* Get current RF-A temperature index */
> + if(priv->ThermalMeter[0] >= (u8)tmpRegA) /* lower temperature */
> {
> tmpOFDMindex = tmpCCK20Mindex =
> 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
> tmpCCK40Mindex = tmpCCK20Mindex - 6;
> @@ -800,16 +803,16 @@ static void
> dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
> else
> {
> tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
> - if(tmpval >= 6)
> // higher temperature
> - tmpOFDMindex = tmpCCK20Mindex = 0; // max
> to +6dB
> + if(tmpval >= 6) /* higher temperature */
> + tmpOFDMindex = tmpCCK20Mindex = 0; /* max to +6dB */
> else
> tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
> tmpCCK40Mindex = 0;
> }
> - //DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d,
> tmpCCK40Mindex = %d",
> - //((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
> - //tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);
> - if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) //40M
> + /*DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d,
> tmpCCK40Mindex = %d",
> + ((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
> + tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);*/
> + if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) /* 40M */
> tmpCCKindex = tmpCCK40Mindex;
> else
> tmpCCKindex = tmpCCK20Mindex;
> @@ -833,7 +836,7 @@ static void
> dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
>
> if(CCKSwingNeedUpdate)
> {
> - //DbgPrint("Update CCK Swing, CCK_index = %d\n",
> pHalData->CCK_index);
> + /*DbgPrint("Update CCK Swing, CCK_index = %d\n",
> pHalData->CCK_index);*/
> dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> }
> if(priv->OFDM_index != tmpOFDMindex)
> @@ -864,7 +867,7 @@ static void dm_InitializeTXPowerTracking_TSSI(struct
> net_device *dev)
>
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - //Initial the Tx BB index and mapping value
> + /* Initial the Tx BB index and mapping value */
> priv->txbbgain_table[0].txbb_iq_amplifygain = 12;
> priv->txbbgain_table[0].txbbgain_value=0x7f8001fe;
> priv->txbbgain_table[1].txbb_iq_amplifygain = 11;
> @@ -940,8 +943,10 @@ static void dm_InitializeTXPowerTracking_TSSI(struct
> net_device *dev)
> priv->txbbgain_table[36].txbb_iq_amplifygain = -24;
> priv->txbbgain_table[36].txbbgain_value=0x10000040;
>
> - //ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
> - //This Table is for CH1~CH13
> + /*
> + * ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
> + * This Table is for CH1~CH13
> + */
> priv->cck_txbbgain_table[0].ccktxbb_valuearray[0] = 0x36;
> priv->cck_txbbgain_table[0].ccktxbb_valuearray[1] = 0x35;
> priv->cck_txbbgain_table[0].ccktxbb_valuearray[2] = 0x2e;
> @@ -1149,8 +1154,10 @@ static void dm_InitializeTXPowerTracking_TSSI(struct
> net_device *dev)
> priv->cck_txbbgain_table[22].ccktxbb_valuearray[6] = 0x03;
> priv->cck_txbbgain_table[22].ccktxbb_valuearray[7] = 0x01;
>
> - //ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
> - //This Table is for CH14
> + /*
> + * ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29
> + * This Table is for CH14
> + */
> priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[0] = 0x36;
> priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[1] = 0x35;
> priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[2] = 0x2e;
> @@ -1368,9 +1375,11 @@ static void
> dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - // Tx Power tracking by Thermal Meter requires Firmware R/W 3-wire.
> This mechanism
> - // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise,
> frequent r/w
> - // 3-wire by driver causes RF to go into a wrong state.
> + /*
> + * Tx Power tracking by Thermal Meter requires Firmware R/W 3-wire.
> This mechanism
> + * can be enabled only when Firmware R/W 3-wire is enabled. Otherwise,
> frequent r/w
> + * 3-wire by driver causes RF to go into a wrong state.
> + */
> if(priv->ieee80211->FwRWRF)
> priv->btxpower_tracking = TRUE;
> else
> @@ -1387,7 +1396,7 @@ void dm_initialize_txpower_tracking(struct net_device
> *dev)
> dm_InitializeTXPowerTracking_TSSI(dev);
> else
> dm_InitializeTXPowerTracking_ThermalMeter(dev);
> -}// dm_InitializeTXPowerTracking
> +} /* dm_InitializeTXPowerTracking */
>
>
> static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
> @@ -1413,7 +1422,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct
> net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> static u8 TM_Trigger;
> - //DbgPrint("dm_CheckTXPowerTracking() \n");
> + /*DbgPrint("dm_CheckTXPowerTracking() \n");*/
> if(!priv->btxpower_tracking)
> return;
> else
> @@ -1427,9 +1436,11 @@ static void
> dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
>
> if(!TM_Trigger)
> {
> - //Attention!! You have to write all 12bits of data to RF, or it
> may cause RF to crash
> - //actually write reg0x02 bit1=0, then bit1=1.
> - //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to
> 0x4f\n");
> + /*
> + * Attention!! You have to write all 12bits of data to RF, or
> it may cause RF to crash
> + * actually write reg0x02 bit1=0, then bit1=1.
> + * DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to
> 0x4f\n");
> + */
> rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
> rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
> rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
> @@ -1439,7 +1450,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct
> net_device *dev)
> }
> else
> {
> - //DbgPrint("Schedule TxPowerTrackingWorkItem\n");
> + /*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
>
> queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
> TM_Trigger = 0;
> }
> @@ -1449,7 +1460,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct
> net_device *dev)
> static void dm_check_txpower_tracking(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - //static u32 tx_power_track_counter = 0;
> + /*static u32 tx_power_track_counter = 0;*/
>
> #ifdef RTL8190P
> dm_CheckTXPowerTracking_TSSI(dev);
> @@ -1460,28 +1471,28 @@ static void dm_check_txpower_tracking(struct
> net_device *dev)
> dm_CheckTXPowerTracking_ThermalMeter(dev);
> #endif
>
> -} // dm_CheckTXPowerTracking
> +} /* dm_CheckTXPowerTracking */
>
>
> static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14)
> {
> u32 TempVal;
> struct r8192_priv *priv = ieee80211_priv(dev);
> - //Write 0xa22 0xa23
> + /* Write 0xa22 0xa23 */
> TempVal = 0;
> if(!bInCH14){
> - //Write 0xa22 0xa23
> + /* Write 0xa22 0xa23 */
> TempVal =
> priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0]
> +
>
> (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8)
> ;
>
> rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
> - //Write 0xa24 ~ 0xa27
> + /* Write 0xa24 ~ 0xa27 */
> TempVal =
> priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2]
> +
>
> (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8)
> +
>
> (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16)+
>
> (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
> rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
> - //Write 0xa28 0xa29
> + /* Write 0xa28 0xa29 */
> TempVal =
> priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6]
> +
>
> (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8)
> ;
>
> @@ -1493,13 +1504,13 @@ static void dm_CCKTxPowerAdjust_TSSI(struct
> net_device *dev, bool bInCH14)
>
> (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8)
> ;
>
> rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
> - //Write 0xa24 ~ 0xa27
> + /* Write 0xa24 ~ 0xa27 */
> TempVal =
> priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2]
> +
>
> (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8)
> +
>
> (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16)+
>
> (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24);
> rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
> - //Write 0xa28 0xa29
> + /* Write 0xa28 0xa29 */
> TempVal =
> priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6]
> +
>
> (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8)
> ;
>
> @@ -1517,13 +1528,13 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct
> net_device *dev, bool bInCH
> TempVal = 0;
> if(!bInCH14)
> {
> - //Write 0xa22 0xa23
> + /* Write 0xa22 0xa23 */
> TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
>
> (CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ;
> rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
> RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x =
> 0x%x\n",
> rCCK0_TxFilter1, TempVal);
> - //Write 0xa24 ~ 0xa27
> + /* Write 0xa24 ~ 0xa27 */
> TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] +
>
> (CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
>
> (CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16)+
> @@ -1531,7 +1542,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct
> net_device *dev, bool bInCH
> rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
> RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x =
> 0x%x\n",
> rCCK0_TxFilter2, TempVal);
> - //Write 0xa28 0xa29
> + /* Write 0xa28 0xa29 */
> TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
>
> (CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ;
>
> @@ -1541,15 +1552,15 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct
> net_device *dev, bool bInCH
> }
> else
> {
> -// priv->CCKTxPowerAdjustCntNotCh14++; //cosa add for debug.
> - //Write 0xa22 0xa23
> + /*priv->CCKTxPowerAdjustCntNotCh14++; cosa add for debug.*/
> + /* Write 0xa22 0xa23 */
> TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] +
>
> (CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ;
>
> rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
> RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
> rCCK0_TxFilter1, TempVal);
> - //Write 0xa24 ~ 0xa27
> + /* Write 0xa24 ~ 0xa27 */
> TempVal = CCKSwingTable_Ch14[priv->CCK_index][2] +
>
> (CCKSwingTable_Ch14[priv->CCK_index][3]<<8) +
>
> (CCKSwingTable_Ch14[priv->CCK_index][4]<<16)+
> @@ -1557,7 +1568,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct
> net_device *dev, bool bInCH
> rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
> RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
> rCCK0_TxFilter2, TempVal);
> - //Write 0xa28 0xa29
> + /* Write 0xa28 0xa29 */
> TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] +
>
> (CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ;
>
> @@ -1570,7 +1581,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct
> net_device *dev, bool bInCH
>
>
> void dm_cck_txpower_adjust(struct net_device *dev, bool binch14)
> -{ // dm_CCKTxPowerAdjust
> +{ /* dm_CCKTxPowerAdjust */
>
> struct r8192_priv *priv = ieee80211_priv(dev);
> if(priv->bDcut == TRUE)
> @@ -1600,7 +1611,7 @@ static void dm_txpower_reset_recovery(
> RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in
> RFC_txPowerTrackingIndex is %x\n",priv->rfc_txpowertrackingindex);
> RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF C I/Q Amplify Gain
> is
> %ld\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbb_iq_amplifygain);
>
> -} // dm_TXPowerResetRecovery
> +} /* dm_TXPowerResetRecovery */
>
> void dm_restore_dynamic_mechanism_state(struct net_device *dev)
> {
> @@ -1613,12 +1624,12 @@ void dm_restore_dynamic_mechanism_state(struct
> net_device *dev)
> return;
> }
>
> - //
> - // Restore previous state for rate adaptive
> - //
> + /*
> + * Restore previous state for rate adaptive
> + */
> if(priv->rate_adaptive.rate_adaptive_disabled)
> return;
> - // TODO: Only 11n mode is implemented currently,
> + /* TODO: Only 11n mode is implemented currently, */
> if(!(priv->ieee80211->mode==WIRELESS_MODE_N_24G ||
> priv->ieee80211->mode==WIRELESS_MODE_N_5G))
> return;
> @@ -1626,38 +1637,38 @@ void dm_restore_dynamic_mechanism_state(struct
> net_device *dev)
> /* 2007/11/15 MH Copy from 8190PCI. */
> u32 ratr_value;
> ratr_value = reg_ratr;
> - if(priv->rf_type == RF_1T2R) // 1T2R, Spatial Stream
> 2 should be disabled
> + if(priv->rf_type == RF_1T2R) /* 1T2R, Spatial Stream
> 2 should be disabled */
> {
> ratr_value &= ~(RATE_ALL_OFDM_2SS);
> - //DbgPrint("HW_VAR_TATR_0 from 0x%x ==>
> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);
> + /*DbgPrint("HW_VAR_TATR_0 from 0x%x ==>
> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);*/
> }
> - //DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);
> - //cosa PlatformEFIOWrite4Byte(Adapter, RATR0,
> ((pu4Byte)(val))[0]);
> + /*DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);*/
> + /*cosa PlatformEFIOWrite4Byte(Adapter, RATR0,
> ((pu4Byte)(val))[0]);*/
> write_nic_dword(dev, RATR0, ratr_value);
> write_nic_byte(dev, UFWP, 1);
> }
> - //Restore TX Power Tracking Index
> + /* Restore TX Power Tracking Index */
> if (priv->btxpower_trackingInit && priv->btxpower_tracking)
> dm_txpower_reset_recovery(dev);
>
> - //
> - //Restore BB Initial Gain
> - //
> + /*
> + * Restore BB Initial Gain
> + */
> dm_bb_initialgain_restore(dev);
>
> -} // DM_RestoreDynamicMechanismState
> +} /* DM_RestoreDynamicMechanismState */
>
> static void dm_bb_initialgain_restore(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - u32 bit_mask = 0x7f; //Bit0~ Bit6
> + u32 bit_mask = 0x7f; /* Bit0~ Bit6 */
>
> if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
> return;
>
> - //Disable Initial Gain
> - //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
> - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1
> and rewrite.
> + /* Disable Initial Gain */
> + /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/
> + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1
> and rewrite. */
> rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bit_mask,
> (u32)priv->initgain_backup.xaagccore1);
> rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bit_mask,
> (u32)priv->initgain_backup.xbagccore1);
> rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bit_mask,
> (u32)priv->initgain_backup.xcagccore1);
> @@ -1670,36 +1681,36 @@ static void dm_bb_initialgain_restore(struct
> net_device *dev)
> RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc60 is
> %x\n",priv->initgain_backup.xcagccore1);
> RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is
> %x\n",priv->initgain_backup.xdagccore1);
> RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is
> %x\n",priv->initgain_backup.cca);
> - //Enable Initial Gain
> - //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);
> - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1
> and rewrite.
> + /* Enable Initial Gain */
> + /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);*/
> + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1
> and rewrite. */
>
> -} // dm_BBInitialGainRestore
> +} /* dm_BBInitialGainRestore */
>
>
> void dm_backup_dynamic_mechanism_state(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - // Fsync to avoid reset
> + /* Fsync to avoid reset */
> priv->bswitch_fsync = false;
> priv->bfsync_processing = false;
> - //Backup BB InitialGain
> + /* Backup BB InitialGain */
> dm_bb_initialgain_backup(dev);
>
> -} // DM_BackupDynamicMechanismState
> +} /* DM_BackupDynamicMechanismState */
>
>
> static void dm_bb_initialgain_backup(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - u32 bit_mask = bMaskByte0; //Bit0~ Bit6
> + u32 bit_mask = bMaskByte0; /* Bit0~ Bit6 */
>
> if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
> return;
>
> - //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
> - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1
> and rewrite.
> + /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/
> + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1
> and rewrite. */
> priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev,
> rOFDM0_XAAGCCore1, bit_mask);
> priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev,
> rOFDM0_XBAGCCore1, bit_mask);
> priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev,
> rOFDM0_XCAGCCore1, bit_mask);
> @@ -1713,7 +1724,7 @@ static void dm_bb_initialgain_backup(struct net_device
> *dev)
> RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc68 is
> %x\n",priv->initgain_backup.xdagccore1);
> RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xa0a is
> %x\n",priv->initgain_backup.cca);
>
> -} // dm_BBInitialGainBakcup
> +} /* dm_BBInitialGainBakcup */
>
> #endif
>
> /*-----------------------------------------------------------------------------
> @@ -1824,7 +1835,7 @@ static void dm_dig_init(struct net_device *dev)
> /* 2007/10/05 MH Disable DIG scheme now. Not tested. */
> dm_digtable.dig_enable_flag = true;
> dm_digtable.dig_algorithm = DIG_ALGO_BY_RSSI;
> - dm_digtable.dbg_mode = DM_DBG_OFF; //off=by real rssi value, on=by
> DM_DigTable.Rssi_val for new dig
> + dm_digtable.dbg_mode = DM_DBG_OFF; /* off=by real rssi value,
> on=by DM_DigTable.Rssi_val for new dig */
> dm_digtable.dig_algorithm_switch = 0;
>
> /* 2007/10/04 MH Define init gain threshold. */
> @@ -1838,7 +1849,7 @@ static void dm_dig_init(struct net_device *dev)
> dm_digtable.rssi_high_power_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW;
> dm_digtable.rssi_high_power_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH;
>
> - dm_digtable.rssi_val = 50; //for new dig debug rssi value
> + dm_digtable.rssi_val = 50; /* for new dig debug rssi value */
> dm_digtable.backoff_val = DM_DIG_BACKOFF;
> dm_digtable.rx_gain_range_max = DM_DIG_MAX;
> if(priv->CustomerID == RT_CID_819x_Netcore)
> @@ -1876,7 +1887,7 @@ static void dm_ctrl_initgain_byrssi(struct net_device
> *dev)
> dm_ctrl_initgain_byrssi_by_fwfalse_alarm(dev);
> else if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
> dm_ctrl_initgain_byrssi_by_driverrssi(dev);
> -// ;
> + /* ; */
> else
> return;
> }
> @@ -1892,15 +1903,15 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
> if (dm_digtable.dig_enable_flag == false)
> return;
>
> - //DbgPrint("Dig by Sw Rssi \n");
> - if(dm_digtable.dig_algorithm_switch) // if switched algorithm, we
> have to disable FW Dig.
> + /*DbgPrint("Dig by Sw Rssi \n");*/
> + if(dm_digtable.dig_algorithm_switch) /* if switched algorithm, we
> have to disable FW Dig. */
> fw_dig = 0;
> - if(fw_dig <= 3) // execute several times to make sure the FW Dig is
> disabled
> - {// FW DIG Off
> + if(fw_dig <= 3) { /* execute several times to make sure the FW Dig is
> disabled */
> + /* FW DIG Off */
> for(i=0; i<3; i++)
> - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only
> clear byte 1 and rewrite.
> + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only
> clear byte 1 and rewrite. */
> fw_dig++;
> - dm_digtable.dig_state = DM_STA_DIG_OFF; //fw dig off.
> + dm_digtable.dig_state = DM_STA_DIG_OFF; /* fw dig off. */
> }
>
> if(priv->ieee80211->state == IEEE80211_LINKED)
> @@ -1908,12 +1919,12 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
> else
> dm_digtable.cur_connect_state = DIG_DISCONNECT;
>
> - //DbgPrint("DM_DigTable.PreConnectState = %d,
> DM_DigTable.CurConnectState = %d \n",
> - //DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);
> + /*DbgPrint("DM_DigTable.PreConnectState = %d,
> DM_DigTable.CurConnectState = %d \n",
> + DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);*/
>
> if(dm_digtable.dbg_mode == DM_DBG_OFF)
> dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
> - //DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val);
> + /*DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val);*/
> dm_initial_gain(dev);
> dm_pd_th(dev);
> dm_cs_ratio(dev);
> @@ -1936,23 +1947,23 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> if(dm_digtable.dig_algorithm_switch)
> {
> dm_digtable.dig_state = DM_STA_DIG_MAX;
> - // Fw DIG On.
> + /* Fw DIG On. */
> for(i=0; i<3; i++)
> - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only
> clear byte 1 and rewrite.
> + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only
> clear byte 1 and rewrite.*/
> dm_digtable.dig_algorithm_switch = 0;
> }
>
> if (priv->ieee80211->state != IEEE80211_LINKED)
> return;
>
> - // For smooth, we can not change DIG state.
> + /* For smooth, we can not change DIG state. */
> if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_low_thresh) &&
> (priv->undecorated_smoothed_pwdb <
> dm_digtable.rssi_high_thresh))
> {
> return;
> }
> - //DbgPrint("Dig by Fw False Alarm\n");
> - //if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)
> + /*DbgPrint("Dig by Fw False Alarm\n");*/
> + /*if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)*/
> /*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
> pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
> DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
> @@ -1972,42 +1983,42 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> reset_cnt = priv->reset_count;
> }
>
> - // If DIG is off, DIG high power state must reset.
> + /* If DIG is off, DIG high power state must reset. */
> dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX;
> dm_digtable.dig_state = DM_STA_DIG_OFF;
>
> - // 1.1 DIG Off.
> - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear
> byte 1 and rewrite.
> + /* 1.1 DIG Off. */
> + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear
> byte 1 and rewrite. */
>
> - // 1.2 Set initial gain.
> + /* 1.2 Set initial gain. */
> write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x17);
> write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x17);
> write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x17);
> write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x17);
>
> - // 1.3 Lower PD_TH for OFDM.
> + /* 1.3 Lower PD_TH for OFDM. */
> if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
> {
> - /* 2008/01/11 MH 40MHZ 90/92 register are not the same.
> */
> - // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
> + /*
> + * 2008/01/11 MH 40MHZ 90/92 register are not the same.
> + * 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
> + */
> write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
> /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
> write_nic_byte(pAdapter, rOFDM0_RxDetector1,
> 0x40);
> + else if (pAdapter->HardwareType ==
> HARDWARE_TYPE_RTL8192E)
> + else
> + PlatformEFIOWrite1Byte(pAdapter,
> rOFDM0_RxDetector1, 0x40);
> */
> - //else if (pAdapter->HardwareType ==
> HARDWARE_TYPE_RTL8192E)
> -
> -
> - //else
> - //PlatformEFIOWrite1Byte(pAdapter,
> rOFDM0_RxDetector1, 0x40);
> }
> else
> write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
>
> - // 1.4 Lower CS ratio for CCK.
> + /* 1.4 Lower CS ratio for CCK. */
> write_nic_byte(dev, 0xa0a, 0x08);
>
> - // 1.5 Higher EDCCA.
> - //PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x325);
> + /* 1.5 Higher EDCCA. */
> + /*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold,
> 0x325);*/
> return;
>
> }
> @@ -2033,10 +2044,12 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> }
>
> dm_digtable.dig_state = DM_STA_DIG_ON;
> - //DbgPrint("DIG ON\n\r");
> + /*DbgPrint("DIG ON\n\r");*/
>
> - // 2.1 Set initial gain.
> - // 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
> + /*
> + * 2.1 Set initial gain.
> + * 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
> + */
> if (reset_flag == 1)
> {
> write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x2c);
> @@ -2052,33 +2065,36 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x20);
> }
>
> - // 2.2 Higher PD_TH for OFDM.
> + /* 2.2 Higher PD_TH for OFDM. */
> if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
> {
> - /* 2008/01/11 MH 40MHZ 90/92 register are not the same.
> */
> - // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
> + /*
> + * 2008/01/11 MH 40MHZ 90/92 register are not the same.
> + * 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
> + */
> write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
> /*
> else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
> write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
> + else if (pAdapter->HardwareType ==
> HARDWARE_TYPE_RTL8192E)
> + else
> + PlatformEFIOWrite1Byte(pAdapter,
> rOFDM0_RxDetector1, 0x42);
> */
> - //else if (pAdapter->HardwareType ==
> HARDWARE_TYPE_RTL8192E)
> -
> - //else
> - //PlatformEFIOWrite1Byte(pAdapter,
> rOFDM0_RxDetector1, 0x42);
> }
> else
> write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
>
> - // 2.3 Higher CS ratio for CCK.
> + /* 2.3 Higher CS ratio for CCK. */
> write_nic_byte(dev, 0xa0a, 0xcd);
>
> - // 2.4 Lower EDCCA.
> - /* 2008/01/11 MH 90/92 series are the same. */
> - //PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);
> + /*
> + * 2.4 Lower EDCCA.
> + * 2008/01/11 MH 90/92 series are the same.
> + */
> + /*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold,
> 0x346);*/
>
> - // 2.5 DIG On.
> - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear
> byte 1 and rewrite.
> + /* 2.5 DIG On. */
> + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear
> byte 1 and rewrite. */
>
> }
>
> @@ -2109,16 +2125,19 @@ static void dm_ctrl_initgain_byrssi_highpwr(
> struct r8192_priv *priv = ieee80211_priv(dev);
> static u32 reset_cnt_highpwr;
>
> - // For smooth, we can not change high power DIG state in the range.
> + /* For smooth, we can not change high power DIG state in the range. */
> if ((priv->undecorated_smoothed_pwdb >
> dm_digtable.rssi_high_power_lowthresh) &&
> (priv->undecorated_smoothed_pwdb <
> dm_digtable.rssi_high_power_highthresh))
> {
> return;
> }
>
> - /* 3. When RSSI >75% or <70%, it is a high power issue. We have to
> judge if
> - it is larger than a threshold and then execute the step
> below. */
> - // 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
> + /*
> + * 3. When RSSI >75% or <70%, it is a high power issue. We have to
> judge if
> + * it is larger than a threshold and then execute the step below.
> + *
> + * 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
> + */
> if (priv->undecorated_smoothed_pwdb >=
> dm_digtable.rssi_high_power_highthresh)
> {
> if (dm_digtable.dig_highpwr_state == DM_STA_DIG_ON &&
> @@ -2127,7 +2146,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
> else
> dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
>
> - // 3.1 Higher PD_TH for OFDM for high power state.
> + /* 3.1 Higher PD_TH for OFDM for high power state. */
> if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
> {
> write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
> @@ -2151,7 +2170,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
> if (priv->undecorated_smoothed_pwdb <
> dm_digtable.rssi_high_power_lowthresh &&
> priv->undecorated_smoothed_pwdb >=
> dm_digtable.rssi_high_thresh)
> {
> - // 3.2 Recover PD_TH for OFDM for normal power region.
> + /* 3.2 Recover PD_TH for OFDM for normal power region.
> */
> if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
> {
> write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
> @@ -2196,7 +2215,7 @@ static void dm_initial_gain(
> else
> dm_digtable.cur_ig_value =
> dm_digtable.rssi_val+10-dm_digtable.backoff_val;
> }
> - else //current state is disconnected
> + else /* current state is disconnected */
> {
> if(dm_digtable.cur_ig_value == 0)
> dm_digtable.cur_ig_value =
> priv->DefaultInitialGain[0];
> @@ -2204,14 +2223,14 @@ static void dm_initial_gain(
> dm_digtable.cur_ig_value =
> dm_digtable.pre_ig_value;
> }
> }
> - else // disconnected -> connected or connected -> disconnected
> + else /* disconnected -> connected or connected -> disconnected */
> {
> dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
> dm_digtable.pre_ig_value = 0;
> }
> - //DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue =
> 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);
> + /*DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue =
> 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);*/
>
> - // if silent reset happened, we should rewrite the values back
> + /* if silent reset happened, we should rewrite the values back */
> if(priv->reset_count != reset_cnt)
> {
> force_write = 1;
> @@ -2227,8 +2246,8 @@ static void dm_initial_gain(
> || !initialized || force_write)
> {
> initial_gain = (u8)dm_digtable.cur_ig_value;
> - //DbgPrint("Write initial gain = 0x%x\n", initial_gain);
> - // Set initial gain.
> + /*DbgPrint("Write initial gain = 0x%x\n",
> initial_gain);*/
> + /* Set initial gain. */
> write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
> write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
> write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
> @@ -2272,12 +2291,12 @@ static void dm_pd_th(
> dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
> }
> }
> - else // disconnected -> connected or connected -> disconnected
> + else /* disconnected -> connected or connected -> disconnected */
> {
> dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
> }
>
> - // if silent reset happened, we should rewrite the values back
> + /* if silent reset happened, we should rewrite the values back */
> if(priv->reset_count != reset_cnt)
> {
> force_write = 1;
> @@ -2288,14 +2307,16 @@ static void dm_pd_th(
> if((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) ||
> (initialized<=3) || force_write)
> {
> - //DbgPrint("Write PD_TH state = %d\n",
> DM_DigTable.CurPD_THState);
> + /*DbgPrint("Write PD_TH state = %d\n",
> DM_DigTable.CurPD_THState);*/
> if(dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER)
> {
> - // Lower PD_TH for OFDM.
> + /* Lower PD_TH for OFDM. */
> if (priv->CurrentChannelBW !=
> HT_CHANNEL_WIDTH_20)
> {
> - /* 2008/01/11 MH 40MHZ 90/92 register
> are not the same. */
> - // 2008/02/05 MH SD3-Jerry 92U/92E
> PD_TH are the same.
> + /*
> + * 2008/01/11 MH 40MHZ 90/92 register
> are not the same.
> + * 2008/02/05 MH SD3-Jerry 92U/92E
> PD_TH are the same.
> + */
> write_nic_byte(dev, (rOFDM0_XATxAFE+3),
> 0x00);
> /*else if (priv->card_8192 ==
> HARDWARE_TYPE_RTL8190P)
> write_nic_byte(dev,
> rOFDM0_RxDetector1, 0x40);
> @@ -2306,11 +2327,13 @@ static void dm_pd_th(
> }
> else if(dm_digtable.curpd_thstate ==
> DIG_PD_AT_NORMAL_POWER)
> {
> - // Higher PD_TH for OFDM.
> + /* Higher PD_TH for OFDM. */
> if (priv->CurrentChannelBW !=
> HT_CHANNEL_WIDTH_20)
> {
> - /* 2008/01/11 MH 40MHZ 90/92 register
> are not the same. */
> - // 2008/02/05 MH SD3-Jerry 92U/92E
> PD_TH are the same.
> + /*
> + * 2008/01/11 MH 40MHZ 90/92 register
> are not the same.
> + * 2008/02/05 MH SD3-Jerry 92U/92E
> PD_TH are the same.
> + */
> write_nic_byte(dev, (rOFDM0_XATxAFE+3),
> 0x20);
> /*else if (priv->card_8192 ==
> HARDWARE_TYPE_RTL8190P)
> write_nic_byte(dev,
> rOFDM0_RxDetector1, 0x42);
> @@ -2321,7 +2344,7 @@ static void dm_pd_th(
> }
> else if(dm_digtable.curpd_thstate ==
> DIG_PD_AT_HIGH_POWER)
> {
> - // Higher PD_TH for OFDM for high power state.
> + /* Higher PD_TH for OFDM for high power state.
> */
> if (priv->CurrentChannelBW !=
> HT_CHANNEL_WIDTH_20)
> {
> write_nic_byte(dev, (rOFDM0_XATxAFE+3),
> 0x10);
> @@ -2369,12 +2392,12 @@ static void dm_cs_ratio(
> dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
> }
> }
> - else // disconnected -> connected or connected -> disconnected
> + else /* disconnected -> connected or connected -> disconnected */
> {
> dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
> }
>
> - // if silent reset happened, we should rewrite the values back
> + /* if silent reset happened, we should rewrite the values back */
> if(priv->reset_count != reset_cnt)
> {
> force_write = 1;
> @@ -2386,15 +2409,15 @@ static void dm_cs_ratio(
> if((dm_digtable.precs_ratio_state !=
> dm_digtable.curcs_ratio_state) ||
> !initialized || force_write)
> {
> - //DbgPrint("Write CS_ratio state = %d\n",
> DM_DigTable.CurCS_ratioState);
> + /*DbgPrint("Write CS_ratio state = %d\n",
> DM_DigTable.CurCS_ratioState);*/
> if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER)
> {
> - // Lower CS ratio for CCK.
> + /* Lower CS ratio for CCK. */
> write_nic_byte(dev, 0xa0a, 0x08);
> }
> else if(dm_digtable.curcs_ratio_state ==
> DIG_CS_RATIO_HIGHER)
> {
> - // Higher CS ratio for CCK.
> + /* Higher CS ratio for CCK. */
> write_nic_byte(dev, 0xa0a, 0xcd);
> }
> dm_digtable.precs_ratio_state =
> dm_digtable.curcs_ratio_state;
> @@ -2411,41 +2434,41 @@ void dm_init_edca_turbo(struct net_device *dev)
> priv->bcurrent_turbo_EDCA = false;
> priv->ieee80211->bis_any_nonbepkts = false;
> priv->bis_cur_rdlstate = false;
> -} // dm_init_edca_turbo
> +} /* dm_init_edca_turbo */
>
> static void dm_check_edca_turbo(
> struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
> - //PSTA_QOS pStaQos = pMgntInfo->pStaQos;
> + /*PSTA_QOS pStaQos = pMgntInfo->pStaQos;*/
>
> - // Keep past Tx/Rx packet count for RT-to-RT EDCA turbo.
> + /* Keep past Tx/Rx packet count for RT-to-RT EDCA turbo. */
> static unsigned long lastTxOkCnt;
> static unsigned long lastRxOkCnt;
> unsigned long curTxOkCnt = 0;
> unsigned long curRxOkCnt = 0;
>
> - //
> - // Do not be Turbo if it's under WiFi config and Qos Enabled, because
> the EDCA parameters
> - // should follow the settings from QAP. By Bruce, 2007-12-07.
> - //
> + /*
> + * Do not be Turbo if it's under WiFi config and Qos Enabled, because
> the EDCA parameters
> + * should follow the settings from QAP. By Bruce, 2007-12-07.
> + */
> if(priv->ieee80211->state != IEEE80211_LINKED)
> goto dm_CheckEdcaTurbo_EXIT;
> - // We do not turn on EDCA turbo mode for some AP that has IOT issue
> + /* We do not turn on EDCA turbo mode for some AP that has IOT issue */
> if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
> goto dm_CheckEdcaTurbo_EXIT;
>
> -// printk("========>%s():bis_any_nonbepkts is
> %d\n",__func__,priv->bis_any_nonbepkts);
> - // Check the status for current condition.
> + /*printk("========>%s():bis_any_nonbepkts is
> %d\n",__func__,priv->bis_any_nonbepkts);*/
> + /* Check the status for current condition. */
> if(!priv->ieee80211->bis_any_nonbepkts)
> {
> curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
> curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
> - // For RT-AP, we needs to turn it on when Rx>Tx
> + /* For RT-AP, we needs to turn it on when Rx>Tx */
> if(curRxOkCnt > 4*curTxOkCnt)
> {
> - //printk("%s():curRxOkCnt > 4*curTxOkCnt\n");
> + /*printk("%s():curRxOkCnt > 4*curTxOkCnt\n");*/
> if(!priv->bis_cur_rdlstate ||
> !priv->bcurrent_turbo_EDCA)
> {
> write_nic_dword(dev, EDCAPARA_BE,
> edca_setting_DL[pHTInfo->IOTPeer]);
> @@ -2455,7 +2478,7 @@ static void dm_check_edca_turbo(
> else
> {
>
> - //printk("%s():curRxOkCnt < 4*curTxOkCnt\n");
> + /*printk("%s():curRxOkCnt < 4*curTxOkCnt\n");*/
> if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
> {
> write_nic_dword(dev, EDCAPARA_BE,
> edca_setting_UL[pHTInfo->IOTPeer]);
> @@ -2468,10 +2491,10 @@ static void dm_check_edca_turbo(
> }
> else
> {
> - //
> - // Turn Off EDCA turbo here.
> - // Restore original EDCA according to the declaration of AP.
> - //
> + /*
> + * Turn Off EDCA turbo here.
> + * Restore original EDCA according to the declaration of AP.
> + */
> if(priv->bcurrent_turbo_EDCA)
> {
>
> @@ -2481,30 +2504,29 @@ static void dm_check_edca_turbo(
> struct ieee80211_qos_parameters *qos_parameters
> = &priv->ieee80211->current_network.qos_data.parameters;
> u8 mode = priv->ieee80211->mode;
>
> - // For Each time updating EDCA parameter, reset EDCA
> turbo mode status.
> + /* For Each time updating EDCA parameter,
> reset EDCA turbo mode status. */
> dm_init_edca_turbo(dev);
> u1bAIFS = qos_parameters->aifs[0] *
> ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
> u4bAcParam =
> ((((u32)(qos_parameters->tx_op_limit[0]))<< AC_PARAM_TXOP_LIMIT_OFFSET)|
> (((u32)(qos_parameters->cw_max[0]))<<
> AC_PARAM_ECW_MAX_OFFSET)|
> (((u32)(qos_parameters->cw_min[0]))<<
> AC_PARAM_ECW_MIN_OFFSET)|
> ((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
> - //write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
> + /*write_nic_dword(dev, WDCAPARA_ADD[i],
> u4bAcParam);*/
> write_nic_dword(dev, EDCAPARA_BE, u4bAcParam);
>
> - // Check ACM bit.
> - // If it is set, immediately set ACM control bit to
> downgrading AC for passing WMM testplan. Annie, 2005-12-13.
> + /*
> + * Check ACM bit.
> + * If it is set, immediately set ACM control
> bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
> + */
> {
> - // TODO: Modified this part and try to set acm control
> in only 1 IO processing!!
> + /* TODO: Modified this part and try
> to set acm control in only 1 IO processing!! */
>
> PACI_AIFSN pAciAifsn =
> (PACI_AIFSN)&(qos_parameters->aifs[0]);
> u8 AcmCtrl;
> read_nic_byte(dev, AcmHwCtrl, &AcmCtrl);
> - if(pAciAifsn->f.ACM)
> - { // ACM bit is 1.
> + if(pAciAifsn->f.ACM) { /* ACM bit is
> 1. */
> AcmCtrl |= AcmHw_BeqEn;
> - }
> - else
> - { // ACM bit is 0.
> + } else { /* ACM bit is 0. */
> AcmCtrl &= (~AcmHw_BeqEn);
> }
>
> @@ -2518,11 +2540,11 @@ static void dm_check_edca_turbo(
>
>
> dm_CheckEdcaTurbo_EXIT:
> - // Set variables for next time.
> + /* Set variables for next time. */
> priv->ieee80211->bis_any_nonbepkts = false;
> lastTxOkCnt = priv->stats.txbytesunicast;
> lastRxOkCnt = priv->stats.rxbytesunicast;
> -} // dm_CheckEdcaTurbo
> +} /* dm_CheckEdcaTurbo */
>
> static void dm_init_ctstoself(struct net_device *dev)
> {
> @@ -2556,12 +2578,12 @@ static void dm_ctstoself(struct net_device *dev)
> {
> curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
> curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
> - if(curRxOkCnt > 4*curTxOkCnt) //downlink, disable CTS to self
> + if(curRxOkCnt > 4*curTxOkCnt) /* downlink, disable CTS to
> self */
> {
> pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
> - //DbgPrint("dm_CTSToSelf() ==> CTS to self disabled --
> downlink\n");
> + /*DbgPrint("dm_CTSToSelf() ==> CTS to self disabled --
> downlink\n");*/
> }
> - else //uplink
> + else /* uplink */
> {
> pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
> }
> @@ -2599,8 +2621,10 @@ static void dm_check_pbc_gpio(struct net_device
> *dev)
>
> if (tmp1byte&BIT6 || tmp1byte&BIT0)
> {
> - // Here we only set bPbcPressed to TRUE
> - // After trigger PBC, the variable will be set to FALSE
> + /*
> + * Here we only set bPbcPressed to TRUE
> + * After trigger PBC, the variable will be set to FALSE
> + */
> RT_TRACE(COMP_IO, "CheckPbcGPIO - PBC is pressed\n");
> priv->bpbc_pressed = true;
> }
> @@ -2628,7 +2652,7 @@ void dm_rf_pathcheck_workitemcallback(struct
> work_struct *work)
> struct delayed_work *dwork = container_of(work,struct
> delayed_work,work);
> struct r8192_priv *priv = container_of(dwork,struct
> r8192_priv,rfpath_check_wq);
> struct net_device *dev =priv->ieee80211->dev;
> - //bool bactually_set = false;
> + /*bool bactually_set = false;*/
> u8 rfpath = 0, i;
>
>
> @@ -2636,7 +2660,7 @@ void dm_rf_pathcheck_workitemcallback(struct
> work_struct *work)
> always be the same. We only read 0xc04 now. */
> read_nic_byte(dev, 0xc04, &rfpath);
>
> - // Check Bit 0-3, it means if RF A-D is enabled.
> + /* Check Bit 0-3, it means if RF A-D is enabled. */
> for (i = 0; i < RF90_PATH_MAX; i++)
> {
> if (rfpath & (0x01<<i))
> @@ -2654,7 +2678,7 @@ static void dm_init_rxpath_selection(struct net_device
> *dev)
> {
> u8 i;
> struct r8192_priv *priv = ieee80211_priv(dev);
> - DM_RxPathSelTable.Enable = 1; //default enabled
> + DM_RxPathSelTable.Enable = 1; /* default enabled */
> DM_RxPathSelTable.SS_TH_low = RxPathSelection_SS_TH_low;
> DM_RxPathSelTable.diff_TH = RxPathSelection_diff_TH;
> if(priv->CustomerID == RT_CID_819x_Netcore)
> @@ -2676,8 +2700,8 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
> struct r8192_priv *priv = ieee80211_priv(dev);
> u8 i, max_rssi_index=0, min_rssi_index=0,
> sec_rssi_index=0, rf_num=0;
> u8 tmp_max_rssi=0, tmp_min_rssi=0,
> tmp_sec_rssi=0;
> - u8 cck_default_Rx=0x2; //RF-C
> - u8 cck_optional_Rx=0x3;//RF-D
> + u8 cck_default_Rx=0x2; /* RF-C */
> + u8 cck_optional_Rx=0x3; /* RF-D */
> long tmp_cck_max_pwdb=0, tmp_cck_min_pwdb=0,
> tmp_cck_sec_pwdb=0;
> u8 cck_rx_ver2_max_index=0,
> cck_rx_ver2_min_index=0, cck_rx_ver2_sec_index=0;
> u8 cur_rf_rssi;
> @@ -2700,11 +2724,11 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
>
> if(priv->ieee80211->mode == WIRELESS_MODE_B)
> {
> - DM_RxPathSelTable.cck_method = CCK_Rx_Version_2; //pure
> B mode, fixed cck version2
> - //DbgPrint("Pure B mode, use cck rx version2 \n");
> + DM_RxPathSelTable.cck_method = CCK_Rx_Version_2; /* pure
> B mode, fixed cck version2 */
> + /*DbgPrint("Pure B mode, use cck rx version2 \n");*/
> }
>
> - //decide max/sec/min rssi index
> + /* decide max/sec/min rssi index */
> for (i=0; i<RF90_PATH_MAX; i++)
> {
> if(!DM_RxPathSelTable.DbgMode)
> @@ -2715,13 +2739,13 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
> rf_num++;
> cur_rf_rssi = DM_RxPathSelTable.rf_rssi[i];
>
> - if(rf_num == 1) // find first enabled rf path and the
> rssi values
> - { //initialize, set all rssi index to the same one
> + if(rf_num == 1) { /* find first enabled rf path and the
> rssi values */
> + /* initialize, set all rssi index to the same
> one */
> max_rssi_index = min_rssi_index =
> sec_rssi_index = i;
> tmp_max_rssi = tmp_min_rssi = tmp_sec_rssi =
> cur_rf_rssi;
> }
> else if(rf_num == 2)
> - { // we pick up the max index first, and let sec
> and min to be the same one
> + { /* we pick up the max index first, and
> let sec and min to be the same one */
> if(cur_rf_rssi >= tmp_max_rssi)
> {
> tmp_max_rssi = cur_rf_rssi;
> @@ -2743,7 +2767,7 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
> max_rssi_index = i;
> }
> else if(cur_rf_rssi == tmp_max_rssi)
> - { // let sec and min point to the
> different index
> + { /* let sec and min point to the
> different index */
> tmp_sec_rssi = cur_rf_rssi;
> sec_rssi_index = i;
> }
> @@ -2754,30 +2778,30 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
> }
> else if(cur_rf_rssi == tmp_sec_rssi)
> {
> - if(tmp_sec_rssi == tmp_min_rssi)
> - { // let sec and min point to the
> different index
> + if(tmp_sec_rssi == tmp_min_rssi) {
> + /* let sec and min point to the
> different index */
> tmp_sec_rssi = cur_rf_rssi;
> sec_rssi_index = i;
> }
> else
> {
> - // This case we don't need to
> set any index
> + /* This case we don't need to
> set any index */
> }
> }
> else if((cur_rf_rssi < tmp_sec_rssi) &&
> (cur_rf_rssi > tmp_min_rssi))
> {
> - // This case we don't need to set any
> index
> + /* This case we don't need to set any
> index */
> }
> else if(cur_rf_rssi == tmp_min_rssi)
> {
> - if(tmp_sec_rssi == tmp_min_rssi)
> - { // let sec and min point to the
> different index
> + if(tmp_sec_rssi == tmp_min_rssi) {
> + /* let sec and min point to the
> different index */
> tmp_min_rssi = cur_rf_rssi;
> min_rssi_index = i;
> }
> else
> {
> - // This case we don't need to
> set any index
> + /* This case we don't need to
> set any index */
> }
> }
> else if(cur_rf_rssi < tmp_min_rssi)
> @@ -2790,7 +2814,7 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
> }
>
> rf_num = 0;
> - // decide max/sec/min cck pwdb index
> + /* decide max/sec/min cck pwdb index */
> if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
> {
> for (i=0; i<RF90_PATH_MAX; i++)
> @@ -2800,13 +2824,12 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
> rf_num++;
> cur_cck_pwdb =
> DM_RxPathSelTable.cck_pwdb_sta[i];
>
> - if(rf_num == 1) // find first enabled rf path
> and the rssi values
> - { //initialize, set all rssi index to the
> same one
> + if(rf_num == 1) /* find first enabled rf path
> and the rssi values */
> + { /* initialize, set all rssi
> index to the same one */
> cck_rx_ver2_max_index =
> cck_rx_ver2_min_index = cck_rx_ver2_sec_index = i;
> tmp_cck_max_pwdb = tmp_cck_min_pwdb =
> tmp_cck_sec_pwdb = cur_cck_pwdb;
> }
> - else if(rf_num == 2)
> - { // we pick up the max index first, and
> let sec and min to be the same one
> + else if(rf_num == 2) { /* we pick up the max
> index first, and let sec and min to be the same one */
> if(cur_cck_pwdb >= tmp_cck_max_pwdb)
> {
> tmp_cck_max_pwdb = cur_cck_pwdb;
> @@ -2827,8 +2850,7 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
> tmp_cck_max_pwdb = cur_cck_pwdb;
> cck_rx_ver2_max_index = i;
> }
> - else if(cur_cck_pwdb ==
> tmp_cck_max_pwdb)
> - { // let sec and min point to the
> different index
> + else if(cur_cck_pwdb ==
> tmp_cck_max_pwdb) { /* let sec and min point to the different index */
> tmp_cck_sec_pwdb = cur_cck_pwdb;
> cck_rx_ver2_sec_index = i;
> }
> @@ -2839,30 +2861,28 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
> }
> else if(cur_cck_pwdb ==
> tmp_cck_sec_pwdb)
> {
> - if(tmp_cck_sec_pwdb ==
> tmp_cck_min_pwdb)
> - { // let sec and min
> point to the different index
> + if(tmp_cck_sec_pwdb ==
> tmp_cck_min_pwdb) { /* let sec and min point to the different index */
> tmp_cck_sec_pwdb =
> cur_cck_pwdb;
> cck_rx_ver2_sec_index =
> i;
> }
> else
> {
> - // This case we don't
> need to set any index
> + /* This case we don't
> need to set any index */
> }
> }
> else if((cur_cck_pwdb <
> tmp_cck_sec_pwdb) && (cur_cck_pwdb > tmp_cck_min_pwdb))
> {
> - // This case we don't need to
> set any index
> + /* This case we don't need to
> set any index */
> }
> else if(cur_cck_pwdb ==
> tmp_cck_min_pwdb)
> {
> - if(tmp_cck_sec_pwdb ==
> tmp_cck_min_pwdb)
> - { // let sec and min
> point to the different index
> + if(tmp_cck_sec_pwdb ==
> tmp_cck_min_pwdb) { /* let sec and min point to the different index */
> tmp_cck_min_pwdb =
> cur_cck_pwdb;
> cck_rx_ver2_min_index =
> i;
> }
> else
> {
> - // This case we don't
> need to set any index
> + /* This case we don't
> need to set any index */
> }
> }
> else if(cur_cck_pwdb < tmp_cck_min_pwdb)
> @@ -2877,8 +2897,10 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
> }
>
>
> - // Set CCK Rx path
> - // reg0xA07[3:2]=cck default rx path, reg0xa07[1:0]=cck optional rx
> path.
> + /*
> + * Set CCK Rx path
> + * reg0xA07[3:2]=cck default rx path, reg0xa07[1:0]=cck optional rx
> path.
> + */
> update_cck_rx_path = 0;
> if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_2)
> {
> @@ -2892,11 +2914,11 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
> {
> if((tmp_max_rssi - tmp_min_rssi) >= DM_RxPathSelTable.diff_TH)
> {
> - //record the enabled rssi threshold
> + /* record the enabled rssi threshold */
> DM_RxPathSelTable.rf_enable_rssi_th[min_rssi_index] =
> tmp_max_rssi+5;
> - //disable the BB Rx path, OFDM
> - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable,
> 0x1<<min_rssi_index, 0x0); // 0xc04[3:0]
> - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable,
> 0x1<<min_rssi_index, 0x0); // 0xd04[3:0]
> + /* disable the BB Rx path, OFDM */
> + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable,
> 0x1<<min_rssi_index, 0x0); /* 0xc04[3:0] */
> + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable,
> 0x1<<min_rssi_index, 0x0); /* 0xd04[3:0] */
> disabled_rf_cnt++;
> }
> if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_1)
> @@ -2918,14 +2940,14 @@ static void dm_rxpath_sel_byrssi(struct net_device
> *dev)
> {
> for(i=0; i<4; i++)
> {
> - if((DM_RxPathSelTable.disabledRF>>i) & 0x1)
> //disabled rf
> + if((DM_RxPathSelTable.disabledRF>>i) & 0x1) /*
> disabled rf */
> {
> if(tmp_max_rssi >=
> DM_RxPathSelTable.rf_enable_rssi_th[i])
> {
> - //enable the BB Rx path
> - //DbgPrint("RF-%d is enabled. \n",
> 0x1<<i);
> - rtl8192_setBBreg(dev,
> rOFDM0_TRxPathEnable, 0x1<<i, 0x1); // 0xc04[3:0]
> - rtl8192_setBBreg(dev,
> rOFDM1_TRxPathEnable, 0x1<<i, 0x1); // 0xd04[3:0]
> + /* enable the BB Rx path */
> + /*DbgPrint("RF-%d is enabled. \n",
> 0x1<<i);*/
> + rtl8192_setBBreg(dev,
> rOFDM0_TRxPathEnable, 0x1<<i, 0x1); /* 0xc04[3:0] */
> + rtl8192_setBBreg(dev,
> rOFDM1_TRxPathEnable, 0x1<<i, 0x1); /* 0xd04[3:0] */
> DM_RxPathSelTable.rf_enable_rssi_th[i]
> = 100;
> disabled_rf_cnt--;
> }
> @@ -2969,7 +2991,7 @@ static void dm_init_fsync (struct net_device *dev)
> priv->ieee80211->fsync_firstdiff_ratethreshold= 100;
> priv->ieee80211->fsync_seconddiff_ratethreshold= 200;
> priv->ieee80211->fsync_state = Default_Fsync;
> - priv->framesyncMonitor = 1; // current default 0xc38 monitor on
> + priv->framesyncMonitor = 1; /* current default 0xc38 monitor on */
>
> init_timer(&priv->fsync_timer);
> priv->fsync_timer.data = (unsigned long)dev;
> @@ -2995,7 +3017,7 @@ void dm_fsync_timer_callback(unsigned long data)
> priv->ieee80211->bfsync_enable &&
> (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC))
> {
> - // Count rate 54, MCS [7], [12, 13, 14, 15]
> + /* Count rate 54, MCS [7], [12, 13, 14, 15] */
> u32 rate_bitmap;
> for(rate_index = 0; rate_index <= 27; rate_index++)
> {
> @@ -3012,13 +3034,13 @@ void dm_fsync_timer_callback(unsigned long data)
> {
>
> u32 DiffNum = priv->rateCountDiffRecord -
> rate_count_diff;
> - // Continue count
> + /* Continue count */
> if(DiffNum >=
> priv->ieee80211->fsync_seconddiff_ratethreshold)
> priv->ContinueDiffCount++;
> else
> priv->ContinueDiffCount = 0;
>
> - // Continue count over
> + /* Continue count over */
> if(priv->ContinueDiffCount >=2)
> {
> bSwitchFromCountDiff = true;
> @@ -3027,11 +3049,11 @@ void dm_fsync_timer_callback(unsigned long data)
> }
> else
> {
> - // Stop the continued count
> + /* Stop the continued count */
> priv->ContinueDiffCount = 0;
> }
>
> - //If Count diff <= FsyncRateCountThreshold
> + /* If Count diff <= FsyncRateCountThreshold */
> if(rate_count_diff <=
> priv->ieee80211->fsync_firstdiff_ratethreshold)
> {
> bSwitchFromCountDiff = true;
> @@ -3040,7 +3062,7 @@ void dm_fsync_timer_callback(unsigned long data)
> priv->rate_record = rate_count;
> priv->rateCountDiffRecord = rate_count_diff;
> RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff
> %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff ,
> priv->bswitch_fsync);
> - // if we never receive those mcs rate and rssi > 30 % then
> switch fsyn
> + /* if we never receive those mcs rate and rssi > 30 % then
> switch fsyn */
> if(priv->undecorated_smoothed_pwdb >
> priv->ieee80211->fsync_rssi_threshold && bSwitchFromCountDiff)
> {
> bDoubleTimeInterval = true;
> @@ -3080,7 +3102,7 @@ void dm_fsync_timer_callback(unsigned long data)
> }
> else
> {
> - // Let Register return to default value;
> + /* Let Register return to default value; */
> if(priv->bswitch_fsync)
> {
> priv->bswitch_fsync = false;
> @@ -3108,7 +3130,7 @@ static void dm_EndSWFsync(struct net_device *dev)
> RT_TRACE(COMP_HALDM, "%s\n", __func__);
> del_timer_sync(&(priv->fsync_timer));
>
> - // Let Register return to default value;
> + /* Let Register return to default value; */
> if(priv->bswitch_fsync)
> {
> priv->bswitch_fsync = false;
> @@ -3130,9 +3152,9 @@ static void dm_StartSWFsync(struct net_device *dev)
> u32 rateBitmap;
>
> RT_TRACE(COMP_HALDM, "%s\n", __func__);
> - // Initial rate record to zero, start to record.
> + /* Initial rate record to zero, start to record. */
> priv->rate_record = 0;
> - // Initialize continue diff count to zero, start to record.
> + /* Initialize continue diff count to zero, start to record. */
> priv->ContinueDiffCount = 0;
> priv->rateCountDiffRecord = 0;
> priv->bswitch_fsync = false;
> @@ -3176,7 +3198,7 @@ void dm_check_fsync(struct net_device *dev)
> #define RegC38_NonFsync_Other_AP 1
> #define RegC38_Fsync_AP_BCM 2
> struct r8192_priv *priv = ieee80211_priv(dev);
> - //u32 framesyncC34;
> + /*u32 framesyncC34;*/
> static u8 reg_c38_State=RegC38_Default;
> static u32 reset_cnt;
>
> @@ -3226,7 +3248,7 @@ void dm_check_fsync(struct net_device *dev)
> if(priv->framesyncMonitor)
> {
> if(reg_c38_State != RegC38_Fsync_AP_BCM)
> - { //For broadcom AP we write different default
> value
> + { /* For broadcom AP we write different default
> value */
> write_nic_byte(dev, rOFDM0_RxDetector3, 0x95);
>
> reg_c38_State = RegC38_Fsync_AP_BCM;
> @@ -3269,7 +3291,7 @@ void dm_check_fsync(struct net_device *dev)
> {
> write_nic_byte(dev,
> rOFDM0_RxDetector3, priv->framesync);
> reg_c38_State = RegC38_Default;
> - //DbgPrint("Fsync is idle,
> rssi>=40, write 0xc38 = 0x%x \n", pHalData->framesync);
> + /*DbgPrint("Fsync is idle,
> rssi>=40, write 0xc38 = 0x%x \n", pHalData->framesync);*/
> }
> }
> }
> @@ -3279,19 +3301,18 @@ void dm_check_fsync(struct net_device *dev)
> {
> write_nic_byte(dev, rOFDM0_RxDetector3,
> priv->framesync);
> reg_c38_State = RegC38_Default;
> - //DbgPrint("Fsync is idle, not
> connected, write 0xc38 = 0x%x \n", pHalData->framesync);
> + /*DbgPrint("Fsync is idle, not
> connected, write 0xc38 = 0x%x \n", pHalData->framesync);*/
> }
> }
> }
> }
> if(priv->framesyncMonitor)
> {
> - if(priv->reset_count != reset_cnt)
> - { //After silent reset, the reg_c38_State will be
> returned to default value
> + if(priv->reset_count != reset_cnt) { /* After silent reset, the
> reg_c38_State will be returned to default value */
> write_nic_byte(dev, rOFDM0_RxDetector3,
> priv->framesync);
> reg_c38_State = RegC38_Default;
> reset_cnt = priv->reset_count;
> - //DbgPrint("reg_c38_State = 0 for silent reset. \n");
> + /*DbgPrint("reg_c38_State = 0 for silent reset. \n");*/
> }
> }
> else
> @@ -3300,7 +3321,7 @@ void dm_check_fsync(struct net_device *dev)
> {
> write_nic_byte(dev, rOFDM0_RxDetector3,
> priv->framesync);
> reg_c38_State = RegC38_Default;
> - //DbgPrint("framesync no monitor, write 0xc38 = 0x%x
> \n", pHalData->framesync);
> + /*DbgPrint("framesync no monitor, write 0xc38 = 0x%x
> \n", pHalData->framesync);*/
> }
> }
> }
> @@ -3331,7 +3352,7 @@ void dm_shadow_init(struct net_device *dev)
> for (offset = 0; offset < 256; offset++)
> {
> read_nic_byte(dev, offset+page*256,
> &dm_shadow[page][offset]);
> - //DbgPrint("P-%d/O-%02x=%02x\r\n", page, offset,
> DM_Shadow[page][offset]);
> + /*DbgPrint("P-%d/O-%02x=%02x\r\n", page, offset,
> DM_Shadow[page][offset]);*/
> }
>
> for (page = 8; page < 11; page++)
> @@ -3366,8 +3387,8 @@ static void dm_init_dynamic_txpower(struct net_device
> *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - //Initial TX Power Control for near/far range , add by amy 2008/05/15,
> porting from windows code.
> - priv->ieee80211->bdynamic_txpower_enable = true; //Default to enable
> Tx Power Control
> + /* Initial TX Power Control for near/far range , add by amy 2008/05/15,
> porting from windows code. */
> + priv->ieee80211->bdynamic_txpower_enable = true; /* Default to
> enable Tx Power Control */
> priv->bLastDTPFlag_High = false;
> priv->bLastDTPFlag_Low = false;
> priv->bDynamicTxHighPower = false;
> @@ -3385,7 +3406,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
> priv->bDynamicTxLowPower = false;
> return;
> }
> - //printk("priv->ieee80211->current_network.unknown_cap_exist is %d
> ,priv->ieee80211->current_network.broadcom_cap_exist is
> %d\n",priv->ieee80211->current_network.unknown_cap_exist,priv->ieee80211->current_network.broadcom_cap_exist);
> + /*printk("priv->ieee80211->current_network.unknown_cap_exist is %d
> ,priv->ieee80211->current_network.broadcom_cap_exist is
> %d\n",priv->ieee80211->current_network.unknown_cap_exist,priv->ieee80211->current_network.broadcom_cap_exist);*/
> if((priv->ieee80211->current_network.atheros_cap_exist) &&
> (priv->ieee80211->mode == IEEE_G)){
> txhipower_threshhold = TX_POWER_ATHEROAP_THRESH_HIGH;
> txlowpower_threshold = TX_POWER_ATHEROAP_THRESH_LOW;
> @@ -3396,7 +3417,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
> txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
> }
>
> -// printk("=======>%s(): txhipower_threshhold is %d,txlowpower_threshold
> is %d\n",__func__,txhipower_threshhold,txlowpower_threshold);
> + /*printk("=======>%s(): txhipower_threshhold is %d,txlowpower_threshold
> is %d\n",__func__,txhipower_threshhold,txlowpower_threshold);*/
> RT_TRACE(COMP_TXAGC,"priv->undecorated_smoothed_pwdb = %ld \n" ,
> priv->undecorated_smoothed_pwdb);
>
> if(priv->ieee80211->state == IEEE80211_LINKED)
> @@ -3408,12 +3429,12 @@ static void dm_dynamic_txpower(struct net_device *dev)
> }
> else
> {
> - // high power state check
> + /* high power state check */
> if(priv->undecorated_smoothed_pwdb <
> txlowpower_threshold && priv->bDynamicTxHighPower == true)
> {
> priv->bDynamicTxHighPower = false;
> }
> - // low power state check
> + /* low power state check */
> if(priv->undecorated_smoothed_pwdb < 35)
> {
> priv->bDynamicTxLowPower = true;
> @@ -3426,7 +3447,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
> }
> else
> {
> - //pHalData->bTXPowerCtrlforNearFarRange =
> !pHalData->bTXPowerCtrlforNearFarRange;
> + /*pHalData->bTXPowerCtrlforNearFarRange =
> !pHalData->bTXPowerCtrlforNearFarRange;*/
> priv->bDynamicTxHighPower = false;
> priv->bDynamicTxLowPower = false;
> }
> @@ -3441,27 +3462,27 @@ static void dm_dynamic_txpower(struct net_device *dev)
> #endif
>
>
> rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
> - //pHalData->bStartTxCtrlByTPCNFR = FALSE; //Clear th flag of
> Set TX Power from Sitesurvey
> + /*pHalData->bStartTxCtrlByTPCNFR = FALSE; Clear th flag of
> Set TX Power from Sitesurvey*/
> }
> priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
> priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower;
>
> } /* dm_dynamic_txpower */
>
> -//added by vivi, for read tx rate and retrycount
> +/*added by vivi, for read tx rate and retrycount */
> static void dm_check_txrateandretrycount(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> struct ieee80211_device *ieee = priv->ieee80211;
> - //for 11n tx rate
> -// priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg);
> + /* for 11n tx rate */
> + /*priv->stats.CurrentShowTxate = read_nic_byte(dev,
> Current_Tx_Rate_Reg);*/
> read_nic_byte(dev, Current_Tx_Rate_Reg,
> &ieee->softmac_stats.CurrentShowTxate);
> - //printk("=============>tx_rate_reg:%x\n",
> ieee->softmac_stats.CurrentShowTxate);
> - //for initial tx rate
> -// priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg);
> + /*printk("=============>tx_rate_reg:%x\n",
> ieee->softmac_stats.CurrentShowTxate);*/
> + /* for initial tx rate */
> + /*priv->stats.last_packet_rate = read_nic_byte(dev,
> Initial_Tx_Rate_Reg);*/
> read_nic_byte(dev, Initial_Tx_Rate_Reg,
> &ieee->softmac_stats.last_packet_rate);
> - //for tx tx retry count
> -// priv->stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg);
> + /* for tx tx retry count */
> + /*priv->stats.txretrycount = read_nic_dword(dev, Tx_Retry_Count_Reg);*/
> read_nic_dword(dev, Tx_Retry_Count_Reg,
> &ieee->softmac_stats.txretrycount);
> }
>
> @@ -3469,9 +3490,11 @@ static void dm_send_rssi_tofw(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - // If we test chariot, we should stop the TX command ?
> - // Because 92E will always silent reset when we send tx command. We use
> register
> - // 0x1e0(byte) to notify driver.
> + /*
> + * If we test chariot, we should stop the TX command ?
> + * Because 92E will always silent reset when we send tx command. We use
> register
> + * 0x1e0(byte) to notify driver.
> + */
> write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
> return;
> }
> --
> 2.2.1
> _______________________________________________
> devel mailing list
> de...@linuxdriverproject.org
> http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
