For aesthetics, introduce a struct to hold the DMA descriptor data.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/ni_labpc.h | 15 ++++--
drivers/staging/comedi/drivers/ni_labpc_isadma.c | 58 ++++++++++++------------
drivers/staging/comedi/drivers/ni_labpc_isadma.h | 2 +-
3 files changed, 41 insertions(+), 34 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.h
b/drivers/staging/comedi/drivers/ni_labpc.h
index ac2c01f..7ba7f2f 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.h
+++ b/drivers/staging/comedi/drivers/ni_labpc.h
@@ -34,6 +34,13 @@ struct labpc_boardinfo {
unsigned is_labpc1200:1; /* has extra regs compared to pc+ */
};
+struct labpc_dma_desc {
+ unsigned int chan; /* DMA channel */
+ u16 *virt_addr; /* virtual address of DMA buffer */
+ phys_addr_t hw_addr; /* hardware (bus) address of DMA buffer */
+ unsigned int size; /* size of DMA transfer (in bytes) */
+};
+
struct labpc_private {
/* number of data points left to be taken */
unsigned long long count;
@@ -61,11 +68,9 @@ struct labpc_private {
* conversions
*/
unsigned int divisor_b1;
- unsigned int dma_chan; /* dma channel to use */
- u16 *dma_buffer; /* buffer ai will dma into */
- phys_addr_t dma_addr;
- /* transfer size in bytes for current transfer */
- unsigned int dma_transfer_size;
+
+ struct labpc_dma_desc dma_desc;
+
/* we are using dma/fifo-half-full/etc. */
enum transfer_type current_transfer;
/*
diff --git a/drivers/staging/comedi/drivers/ni_labpc_isadma.c
b/drivers/staging/comedi/drivers/ni_labpc_isadma.c
index 6d38605..b7217a7 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_isadma.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_isadma.c
@@ -60,22 +60,23 @@ static unsigned int labpc_suggest_transfer_size(const
struct comedi_cmd *cmd)
void labpc_setup_dma(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct labpc_private *devpriv = dev->private;
+ struct labpc_dma_desc *dma = &devpriv->dma_desc;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned long irq_flags;
irq_flags = claim_dma_lock();
- disable_dma(devpriv->dma_chan);
+ disable_dma(dma->chan);
/* clear flip-flop to make sure 2-byte registers for
* count and address get set correctly */
- clear_dma_ff(devpriv->dma_chan);
- set_dma_addr(devpriv->dma_chan, devpriv->dma_addr);
+ clear_dma_ff(dma->chan);
+ set_dma_addr(dma->chan, dma->hw_addr);
/* set appropriate size of transfer */
- devpriv->dma_transfer_size = labpc_suggest_transfer_size(cmd);
+ dma->size = labpc_suggest_transfer_size(cmd);
if (cmd->stop_src == TRIG_COUNT &&
- devpriv->count * sample_size < devpriv->dma_transfer_size)
- devpriv->dma_transfer_size = devpriv->count * sample_size;
- set_dma_count(devpriv->dma_chan, devpriv->dma_transfer_size);
- enable_dma(devpriv->dma_chan);
+ devpriv->count * sample_size < dma->size)
+ dma->size = devpriv->count * sample_size;
+ set_dma_count(dma->chan, dma->size);
+ enable_dma(dma->chan);
release_dma_lock(irq_flags);
/* set CMD3 bits for caller to enable DMA and interrupt */
devpriv->cmd3 |= (CMD3_DMAEN | CMD3_DMATCINTEN);
@@ -85,6 +86,7 @@ EXPORT_SYMBOL_GPL(labpc_setup_dma);
void labpc_drain_dma(struct comedi_device *dev)
{
struct labpc_private *devpriv = dev->private;
+ struct labpc_dma_desc *dma = &devpriv->dma_desc;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
@@ -95,18 +97,18 @@ void labpc_drain_dma(struct comedi_device *dev)
status = devpriv->stat1;
flags = claim_dma_lock();
- disable_dma(devpriv->dma_chan);
+ disable_dma(dma->chan);
/* clear flip-flop to make sure 2-byte registers for
* count and address get set correctly */
- clear_dma_ff(devpriv->dma_chan);
+ clear_dma_ff(dma->chan);
/* figure out how many points to read */
- max_points = devpriv->dma_transfer_size / sample_size;
+ max_points = dma->size / sample_size;
/* residue is the number of points left to be done on the dma
* transfer. It should always be zero at this point unless
* the stop_src is set to external triggering.
*/
- residue = get_dma_residue(devpriv->dma_chan) / sample_size;
+ residue = get_dma_residue(dma->chan) / sample_size;
num_points = max_points - residue;
if (cmd->stop_src == TRIG_COUNT && devpriv->count < num_points)
num_points = devpriv->count;
@@ -114,21 +116,21 @@ void labpc_drain_dma(struct comedi_device *dev)
/* figure out how many points will be stored next time */
leftover = 0;
if (cmd->stop_src != TRIG_COUNT) {
- leftover = devpriv->dma_transfer_size / sample_size;
+ leftover = dma->size / sample_size;
} else if (devpriv->count > num_points) {
leftover = devpriv->count - num_points;
if (leftover > max_points)
leftover = max_points;
}
- comedi_buf_write_samples(s, devpriv->dma_buffer, num_points);
+ comedi_buf_write_samples(s, dma->virt_addr, num_points);
if (cmd->stop_src == TRIG_COUNT)
devpriv->count -= num_points;
/* set address and count for next transfer */
- set_dma_addr(devpriv->dma_chan, devpriv->dma_addr);
- set_dma_count(devpriv->dma_chan, leftover * sample_size);
+ set_dma_addr(dma->chan, dma->hw_addr);
+ set_dma_count(dma->chan, leftover * sample_size);
release_dma_lock(flags);
}
EXPORT_SYMBOL_GPL(labpc_drain_dma);
@@ -136,10 +138,11 @@ EXPORT_SYMBOL_GPL(labpc_drain_dma);
static void handle_isa_dma(struct comedi_device *dev)
{
struct labpc_private *devpriv = dev->private;
+ struct labpc_dma_desc *dma = &devpriv->dma_desc;
labpc_drain_dma(dev);
- enable_dma(devpriv->dma_chan);
+ enable_dma(dma->chan);
/* clear dma tc interrupt */
devpriv->write_byte(dev, 0x1, DMATC_CLEAR_REG);
@@ -163,6 +166,7 @@ EXPORT_SYMBOL_GPL(labpc_handle_dma_status);
int labpc_init_dma_chan(struct comedi_device *dev, unsigned int dma_chan)
{
struct labpc_private *devpriv = dev->private;
+ struct labpc_dma_desc *dma = &devpriv->dma_desc;
void *dma_buffer;
unsigned long dma_flags;
int ret;
@@ -180,13 +184,13 @@ int labpc_init_dma_chan(struct comedi_device *dev,
unsigned int dma_chan)
return ret;
}
- devpriv->dma_buffer = dma_buffer;
- devpriv->dma_chan = dma_chan;
- devpriv->dma_addr = virt_to_bus(devpriv->dma_buffer);
+ dma->virt_addr = dma_buffer;
+ dma->chan = dma_chan;
+ dma->hw_addr = virt_to_bus(dma->virt_addr);
dma_flags = claim_dma_lock();
- disable_dma(devpriv->dma_chan);
- set_dma_mode(devpriv->dma_chan, DMA_MODE_READ);
+ disable_dma(dma->chan);
+ set_dma_mode(dma->chan, DMA_MODE_READ);
release_dma_lock(dma_flags);
return 0;
@@ -196,13 +200,11 @@ EXPORT_SYMBOL_GPL(labpc_init_dma_chan);
void labpc_free_dma_chan(struct comedi_device *dev)
{
struct labpc_private *devpriv = dev->private;
+ struct labpc_dma_desc *dma = &devpriv->dma_desc;
- kfree(devpriv->dma_buffer);
- devpriv->dma_buffer = NULL;
- if (devpriv->dma_chan) {
- free_dma(devpriv->dma_chan);
- devpriv->dma_chan = 0;
- }
+ kfree(dma->virt_addr);
+ if (dma->chan)
+ free_dma(dma->chan);
}
EXPORT_SYMBOL_GPL(labpc_free_dma_chan);
diff --git a/drivers/staging/comedi/drivers/ni_labpc_isadma.h
b/drivers/staging/comedi/drivers/ni_labpc_isadma.h
index 771af4b..2582f22 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_isadma.h
+++ b/drivers/staging/comedi/drivers/ni_labpc_isadma.h
@@ -13,7 +13,7 @@ static inline bool labpc_have_dma_chan(struct comedi_device
*dev)
{
struct labpc_private *devpriv = dev->private;
- return (bool)devpriv->dma_chan;
+ return (bool)devpriv->dma_desc.chan;
}
int labpc_init_dma_chan(struct comedi_device *dev, unsigned int dma_chan);
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
