On Thursday, January 22, 2015 3:31 AM, Ian Abbott wrote: > On 22/01/15 00:22, H Hartley Sweeten wrote: >> A couple cleanup patches for the vmk80xx driver. >> >> H Hartley Sweeten (2): >> staging: comedi: vmk80xx: GPCT_RESET is not an (*insn_config) instruction >> staging: comedi: vmk80xx: tidy up vmk80xx_cnt_insn_config() >> >> drivers/staging/comedi/drivers/vmk80xx.c | 46 >> ++++++++++++++------------------ >> 1 file changed, 20 insertions(+), 26 deletions(-) >> > > Reviewed-by: Ian Abbott <abbo...@mev.co.uk>
Ian, The only GPCT_* define from comedi.h that is used is GPCT_RESET. That one is Only used in some #if 0'ed out code in ni_mio_comon.c and that code would not compile if it was enabled. Do you see any problems in just removing those defines from comedi.h? Specifically I'm referring to this block: /* counters -- these are arbitrary values */ #define GPCT_RESET 0x0001 #define GPCT_SET_SOURCE 0x0002 #define GPCT_SET_GATE 0x0004 #define GPCT_SET_DIRECTION 0x0008 #define GPCT_SET_OPERATION 0x0010 #define GPCT_ARM 0x0020 #define GPCT_DISARM 0x0040 #define GPCT_GET_INT_CLK_FRQ 0x0080 #define GPCT_INT_CLOCK 0x0001 #define GPCT_EXT_PIN 0x0002 #define GPCT_NO_GATE 0x0004 #define GPCT_UP 0x0008 #define GPCT_DOWN 0x0010 #define GPCT_HWUD 0x0020 #define GPCT_SIMPLE_EVENT 0x0040 #define GPCT_SINGLE_PERIOD 0x0080 #define GPCT_SINGLE_PW 0x0100 #define GPCT_CONT_PULSE_OUT 0x0200 #define GPCT_SINGLE_PULSE_OUT 0x0400 Regards, Hartley _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
