Both files have the same contents (with the exception of comments).
One of them will not survive future commits.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikow...@gmail.com>
---
 drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h | 92 ++++++++++++++++-------
 1 file changed, 65 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h 
b/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h
index d080876..8a1d91e 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h
@@ -53,10 +53,10 @@
 #define MCS_TXAGC              0x340
 #define CCK_TXAGC              0x348
 
-/*---------------------0x400~0x4ff----------------------*/
+/* Mac block on/off control register */
 #define MacBlkCtrl                     0x403
 
-#define rFPGA0_RFMOD                   0x800
+#define rFPGA0_RFMOD                   0x800 /* RF mode & CCK TxSC */
 #define rFPGA0_TxInfo                  0x804
 #define rFPGA0_PSDFunction             0x808
 #define rFPGA0_TxGainStage             0x80c
@@ -98,6 +98,7 @@
 #define rFPGA0_XAB_RFInterfaceRB       0x8e0
 #define rFPGA0_XCD_RFInterfaceRB       0x8e4
 
+/* Page 9 - RF mode & OFDM TxSC */
 #define rFPGA1_RFMOD                   0x900
 #define rFPGA1_TxBlock                 0x904
 #define rFPGA1_DebugSelect             0x908
@@ -106,14 +107,16 @@
 #define rCCK0_System                   0xa00
 #define rCCK0_AFESetting               0xa04
 #define rCCK0_CCA                      0xa08
+/* AGC default value, saturation level */
 #define rCCK0_RxAGC1                   0xa0c
-#define rCCK0_RxAGC2                   0xa10
+#define rCCK0_RxAGC2                   0xa10 /* AGC & DAGC */
 #define rCCK0_RxHP                     0xa14
+/* Timing recovery & channel estimation threshold */
 #define rCCK0_DSPParameter1            0xa18
-#define rCCK0_DSPParameter2            0xa1c
+#define rCCK0_DSPParameter2            0xa1c /* SQ threshold */
 #define rCCK0_TxFilter1                        0xa20
 #define rCCK0_TxFilter2                        0xa24
-#define rCCK0_DebugPort                        0xa28
+#define rCCK0_DebugPort                        0xa28 /* Debug port and TX 
filter 3 */
 #define rCCK0_FalseAlarmReport         0xa2c
 #define rCCK0_TRSSIReport              0xa50
 #define rCCK0_RxReport                 0xa54
@@ -124,22 +127,24 @@
 #define rOFDM0_TRxPathEnable           0xc04
 #define rOFDM0_TRMuxPar                        0xc08
 #define rOFDM0_TRSWIsolation           0xc0c
+/* RxIQ DC offset, Rx digital filter, DC notch filter */
 #define rOFDM0_XARxAFE                 0xc10
-#define rOFDM0_XARxIQImbalance         0xc14
+#define rOFDM0_XARxIQImbalance         0xc14 /* RxIQ imbalance matrix */
 #define rOFDM0_XBRxAFE                 0xc18
 #define rOFDM0_XBRxIQImbalance         0xc1c
 #define rOFDM0_XCRxAFE                 0xc20
 #define rOFDM0_XCRxIQImbalance         0xc24
 #define rOFDM0_XDRxAFE                 0xc28
 #define rOFDM0_XDRxIQImbalance         0xc2c
-#define rOFDM0_RxDetector1             0xc30
-#define rOFDM0_RxDetector2             0xc34
-#define rOFDM0_RxDetector3             0xc38
+#define rOFDM0_RxDetector1             0xc30 /* PD, BW & SBD */
+#define rOFDM0_RxDetector2             0xc34 /* SBD */
+#define rOFDM0_RxDetector3             0xc38 /* Frame Sync */
+/* PD, SBD, Frame Sync & Short-GI */
 #define rOFDM0_RxDetector4             0xc3c
-#define rOFDM0_RxDSP                   0xc40
-#define rOFDM0_CFOandDAGC              0xc44
+#define rOFDM0_RxDSP                   0xc40 /* Rx Sync Path */
+#define rOFDM0_CFOandDAGC              0xc44 /* CFO & DAGC */
 #define rOFDM0_CCADropThreshold                0xc48
-#define rOFDM0_ECCAThreshold           0xc4c
+#define rOFDM0_ECCAThreshold           0xc4c /* Energy CCA */
 #define rOFDM0_XAAGCCore1              0xc50
 #define rOFDM0_XAAGCCore2              0xc54
 #define rOFDM0_XBAGCCore1              0xc58
@@ -184,9 +189,9 @@
 #define rOFDM1_PseudoNoiseStateAB      0xd50
 #define rOFDM1_PseudoNoiseStateCD      0xd54
 #define rOFDM1_RxPseudoNoiseWgt                0xd58
-#define rOFDM_PHYCounter1              0xda0
-#define rOFDM_PHYCounter2              0xda4
-#define rOFDM_PHYCounter3              0xda8
+#define rOFDM_PHYCounter1              0xda0 /* cca, parity fail */
+#define rOFDM_PHYCounter2              0xda4 /* rate illegal, crc8 fail */
+#define rOFDM_PHYCounter3              0xda8 /* MCS not supported */
 #define rOFDM_ShortCFOAB               0xdac
 #define rOFDM_ShortCFOCD               0xdb0
 #define rOFDM_LongCFOAB                        0xdb4
@@ -221,14 +226,17 @@
 #define rZebra1_RxLPF                  0xb
 #define rZebra1_RxHPFCorner            0xc
 
+/* Zebra 4 */
 #define rGlobalCtrl                    0
 #define rRTL8256_TxLPF                 19
 #define rRTL8256_RxLPF                 11
 
+/* RTL8258 */
 #define rRTL8258_TxLPF                 0x11
 #define rRTL8258_RxLPF                 0x13
 #define rRTL8258_RSSILPF               0xa
 
+/* Bit Mask - Page 1*/
 #define bBBResetB                      0x100
 #define bGlobalResetB                  0x200
 #define bOFDMTxStart                   0x4
@@ -273,7 +281,7 @@
 #define bCCKTxCRC16                    0xffff
 #define bCCKTxStatus                   0x1
 #define bOFDMTxStatus                  0x2
-
+/* Bit Mask - Page 8 */
 #define bRFMOD                         0x1
 #define bJapanMode                     0x2
 #define bCCKTxSC                       0x30
@@ -290,13 +298,16 @@
 #define bRFStart                       0x0000f000
 #define bBBStart                       0x000000f0
 #define bBBCCKStart                    0x0000000f
+/* Bit Mask - rFPGA0_RFTiming2 */
 #define bPAEnd                         0xf
 #define bTREnd                         0x0f000000
 #define bRFEnd                         0x000f0000
+/* T2R */
 #define bCCAMask                       0x000000f0
 #define bR2RCCAMask                    0x00000f00
 #define bHSSI_R2TDelay                 0xf8000000
 #define bHSSI_T2RDelay                 0xf80000
+/* Channel gain at continue TX. */
 #define bContTxHSSI                    0x400
 #define bIGFromCCK                     0x200
 #define bAGCAddress                    0x3f
@@ -308,6 +319,7 @@
 #define b3WireDataLength               0x800
 #define b3WireAddressLength            0x400
 #define b3WireRFPowerDown              0x1
+/*#define bHWSISelect                  0x8 */
 #define b5GPAPEPolarity                        0x40000000
 #define b2GPAPEPolarity                        0x80000000
 #define bRFSW_TxDefaultAnt             0x3
@@ -318,6 +330,7 @@
 #define bRFSI_3WireClock               0x2
 #define bRFSI_3WireLoad                        0x4
 #define bRFSI_3WireRW                  0x8
+/* 3-wire total control */
 #define bRFSI_3Wire                    0xf
 #define bRFSI_RFENV                    0x10
 #define bRFSI_TRSW                     0x20
@@ -343,11 +356,11 @@
 #define bLSIG_Length                   0x1fffe
 #define bLSIG_Parity                   0x20
 #define bCCKRxPhase                    0x4
-#define bLSSIReadAddress               0x3f000000
-#define bLSSIReadEdge                  0x80000000
+#define bLSSIReadAddress               0x3f000000 /* LSSI "read" address */
+#define bLSSIReadEdge                  0x80000000 /* LSSI "read" edge signal */
 #define bLSSIReadBackData              0xfff
 #define bLSSIReadOKFlag                        0x1000
-#define bCCKSampleRate                 0x8
+#define bCCKSampleRate                 0x8 /* 0: 44 MHz, 1: 88MHz */
 
 #define bRegulator0Standby             0x1
 #define bRegulatorPLLStandby           0x2
@@ -404,10 +417,13 @@
 #define bPSDSineToneScale              0x7f000000
 #define bPSDReport                     0xffff
 
+/* Page 8 */
 #define bOFDMTxSC                      0x30000000
 #define bCCKTxOn                       0x1
 #define bOFDMTxOn                      0x2
+/* Reset debug page and also HWord, LWord */
 #define bDebugPage                     0xfff
+/* Reset debug page and LWord */
 #define bDebugItem                     0xff
 #define bAntL                          0x10
 #define bAntNonHT                      0x100
@@ -416,6 +432,7 @@
 #define bAntHT1S1                      0x100000
 #define bAntNonHTS1                    0x1000000
 
+/* Page a */
 #define bCCKBBMode                     0x3
 #define bCCKTxPowerSaving              0x80
 #define bCCKRxPowerSaving              0x40
@@ -436,7 +453,7 @@
 #define bCCKBistMode                   0x80000000
 #define bCCKCCAMask                    0x40000000
 #define bCCKTxDACPhase                 0x4
-#define bCCKRxADCPhase                 0x20000000
+#define bCCKRxADCPhase                 0x20000000 /* r_rx_clk */
 #define bCCKr_cp_mode0                 0x0100
 #define bCCKTxDCOffset                 0xf0
 #define bCCKRxDCOffset                 0xf
@@ -450,11 +467,14 @@
 #define bCCKRxIG                       0x7f00
 #define bCCKLNAPolarity                        0x800000
 #define bCCKRx1stGain                  0x7f0000
+/* CCK Rx Initial gain polarity */
 #define bCCKRFExtend                   0x20000000
 #define bCCKRxAGCSatLevel              0x1f000000
 #define bCCKRxAGCSatCount              0xe0
+/* AGCSAmp_dly */
 #define bCCKRxRFSettle                 0x1f
 #define bCCKFixedRxAGC                 0x8000
+/*#define bCCKRxAGCFormat              0x4000  remove to HSSI register 0x824 */
 #define bCCKAntennaPolarity            0x2000
 #define bCCKTxFilterType               0x0c00
 #define bCCKRxAGCReportType            0x0300
@@ -495,6 +515,7 @@
 #define bCCKDefaultRxPath              0xc000000
 #define bCCKOptionRxPath               0x3000000
 
+/* Page c */
 #define bNumOfSTF                      0x3
 #define bShift_L                       0xc0
 #define bGI_TH                         0xc
@@ -596,7 +617,9 @@
 #define bRxHP_BBP1                     0x7000
 #define bRxHP_BBP2                     0x70000
 #define bRxHP_BBP3                     0x700000
+/* The threshold for high power */
 #define bRSSI_H                                0x7f0000
+/* The threshold for ant diversity */
 #define bRSSI_Gen                      0x7f000000
 #define bRxSettle_TRSW                 0x7
 #define bRxSettle_LNA                  0x38
@@ -631,6 +654,7 @@
 #define bRxPD_Delay_TH1                        0x38
 #define bRxPD_Delay_TH2                        0x1c0
 #define bRxPD_DC_COUNT_MAX             0x600
+/*#define bRxMF_Hold                   0x3800*/
 #define bRxPD_Delay_TH                 0x8000
 #define bRxProcess_Delay               0xf0000
 #define bRxSearchrange_GI2_Early       0x700000
@@ -656,6 +680,7 @@
 
 #define bExtLNAGain            0x7c00
 
+/* Page d */
 #define bSTBCEn                        0x4
 #define bAntennaMapping                0x10
 #define bNss                   0x20
@@ -665,6 +690,13 @@
 #define bOFDMContinueTx                0x10000000
 #define bOFDMSingleCarrier     0x20000000
 #define bOFDMSingleTone                0x40000000
+/* #define bRxPath1            0x01
+ * #define bRxPath2            0x02
+ * #define bRxPath3            0x04
+ * #define bRxPath4            0x08
+ * #define bTxPath1            0x10
+ * #define bTxPath2            0x20
+*/
 #define bHTDetect              0x100
 #define bCFOEn                 0x10000
 #define bCFOValue              0xfff00000
@@ -677,8 +709,8 @@
 #define bCounter_MCSNoSupport  0xffff
 #define bCounter_FastSync      0xffff
 #define bShortCFO              0xfff
-#define bShortCFOTLength       12
-#define bShortCFOFLength       11
+#define bShortCFOTLength       12 /* total */
+#define bShortCFOFLength       11 /* fraction */
 #define bLongCFO               0x7ff
 #define bLongCFOTLength                11
 #define bLongCFOFLength                11
@@ -755,6 +787,7 @@
 #define bUChCfg                        0x7000000
 #define bUpdEqz                        0x8000000
 
+/* Page e */
 #define bTxAGCRate18_06                0x7f7f7f7f
 #define bTxAGCRate54_24                0x7f7f7f7f
 #define bTxAGCRateMCS32                0x7f
@@ -764,8 +797,7 @@
 #define bTxAGCRateMCS11_MCS8   0x7f7f7f7f
 #define bTxAGCRateMCS15_MCS12  0x7f7f7f7f
 
-
-#define bRxPesudoNoiseOn       0x20000000
+#define bRxPesudoNoiseOn       0x20000000 /* Rx Pseduo noise */
 #define bRxPesudoNoise_A       0xff
 #define bRxPesudoNoise_B       0xff00
 #define bRxPesudoNoise_C       0xff0000
@@ -775,6 +807,7 @@
 #define bPesudoNoiseState_C    0xffff
 #define bPesudoNoiseState_D    0xffff0000
 
+/* RF Zebra 1 */
 #define bZebra1_HSSIEnable     0x8
 #define bZebra1_TRxControl     0xc00
 #define bZebra1_TRxGainSetting 0x07f
@@ -785,15 +818,18 @@
 #define bZebra1_TxLPFBW        0x400
 #define bZebra1_RxLPFBW        0x600
 
+/* Zebra4 */
 #define bRTL8256RegModeCtrl1   0x100
 #define bRTL8256RegModeCtrl0   0x40
 #define bRTL8256_TxLPFBW       0x18
 #define bRTL8256_RxLPFBW       0x600
 
+/* RTL8258 */
 #define bRTL8258_TxLPFBW       0xc
 #define bRTL8258_RxLPFBW       0xc00
 #define bRTL8258_RSSILPFBW     0xc0
 
+/* byte enable for sb_write */
 #define bByte0 0x1
 #define bByte1 0x2
 #define bByte2 0x4
@@ -802,6 +838,7 @@
 #define bWord1 0xc
 #define bDWord 0xf
 
+/* for PutRegsetting & GetRegSetting BitMask */
 #define bMaskByte0     0xff
 #define bMaskByte1     0xff00
 #define bMaskByte2     0xff0000
@@ -810,6 +847,7 @@
 #define bMaskLWord     0x0000ffff
 #define bMaskDWord     0xffffffff
 
+/* for PutRFRegsetting & GetRFRegSetting BitMask */
 #define bMask12Bits    0xfff
 
 #define bEnable                0x1
@@ -818,14 +856,14 @@
 #define LeftAntenna    0x0
 #define RightAntenna   0x1
 
-#define tCheckTxStatus         500
-#define tUpdateRxCounter       100
+#define tCheckTxStatus         500 /* 500 ms */
+#define tUpdateRxCounter       100 /* 100 ms */
 
 #define rateCCK                0
 #define rateOFDM       1
 #define rateHT         2
 
-#define bPMAC_End      0x1ff
+#define bPMAC_End      0x1ff /* define Register-End */
 #define bFPGAPHY0_End  0x8ff
 #define bFPGAPHY1_End  0x9ff
 #define bCCKPHY0_End   0xaff
-- 
1.8.4.1

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to