Le 28/05/2015 16:35, Arnd Bergmann a écrit : > The newly added wilc1000 driver lacks several Kconfig dependencies, > resulting in a multitude of randconfig build errors, e.g.: > > drivers/built-in.o: In function `WILC_WFI_mgmt_tx_cancel_wait': > binder.c:(.text+0x12bd28): undefined reference to > `cfg80211_remain_on_channel_expired' > drivers/built-in.o: In function `WILC_WFI_CfgSetChannel': > binder.c:(.text+0x12c9d8): undefined reference to > `ieee80211_frequency_to_channel' > drivers/built-in.o: In function `WILC_WFI_CfgAlloc': > binder.c:(.text+0x132530): undefined reference to `wiphy_new_nm' > drivers/built-in.o: In function `wilc_netdev_init': > binder.c:(.text+0x1356d0): undefined reference to `register_inetaddr_notifier' > drivers/built-in.o: In function `linux_spi_init': > binder.c:(.text+0x210a68): undefined reference to `spi_register_driver' > > This change ensures that we always have at least one of SPI or MMC > enabled, and are only able to pick an interface that works. It also > adds all the missing dependencies for networking infrastructure > (cfg80211, wext, and ipv4). > > In order to make it readable, I also took the liberty of re-indenting > the Kconfig file to the normal conventions. > > Signed-off-by: Arnd Bergmann <a...@arndb.de>
Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com> Thanks a lot Arnd! Bye, > diff --git a/drivers/staging/wilc1000/Kconfig > b/drivers/staging/wilc1000/Kconfig > index 101f908bc9ed..02381521ff7f 100644 > --- a/drivers/staging/wilc1000/Kconfig > +++ b/drivers/staging/wilc1000/Kconfig > @@ -1,55 +1,57 @@ > config WILC1000 > tristate "WILC1000 support (WiFi only)" > + depends on CFG80211 && WEXT_CORE && INET > + depends on MMC || SPI > ---help--- > - This module only support IEEE 802.11n WiFi. > + This module only support IEEE 802.11n WiFi. > > choice > prompt "Memory Allocation" > depends on WILC1000 > default WILC1000_PREALLOCATE_AT_LOADING_DRIVER > > - config WILC1000_PREALLOCATE_AT_LOADING_DRIVER > - bool "Preallocate memory at loading driver" > - ---help--- > - This choice supports static allocation of the memory > - for the receive buffer. The driver will allocate the > RX buffer > - during initial time. The driver will also free the > buffer > - by calling network device stop. > - > - config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY > - bool "Dynamically allocate memory in real time" > - ---help--- > - This choice supports dynamic allocation of the memory > - for the receive buffer. The driver will allocate the > RX buffer > - when it is required. > +config WILC1000_PREALLOCATE_AT_LOADING_DRIVER > + bool "Preallocate memory at loading driver" > + ---help--- > + This choice supports static allocation of the memory > + for the receive buffer. The driver will allocate the RX buffer > + during initial time. The driver will also free the buffer > + by calling network device stop. > + > +config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY > + bool "Dynamically allocate memory in real time" > + ---help--- > + This choice supports dynamic allocation of the memory > + for the receive buffer. The driver will allocate the RX buffer > + when it is required. > endchoice > > - > choice > - prompt "Bus Type" > - depends on WILC1000 > - default WILC1000_SDIO > - > + prompt "Bus Type" > + depends on WILC1000 > + default WILC1000_SDIO > + > config WILC1000_SDIO > - bool "SDIO support" > - depends on MMC > - ---help--- > - This module adds support for the SDIO interface of > adapters using > - WILC chipset. Select this if your platform is using the > SDIO bus. > + bool "SDIO support" > + depends on MMC > + ---help--- > + This module adds support for the SDIO interface > + of adapters using WILC chipset. Select this if > + your platform is using the SDIO bus. > > config WILC1000_SPI > - bool "SPI support" > - ---help--- > - This module adds support for the SPI interface of > adapters using > - WILC chipset. Select this if your platform is using the > SPI bus. > + depends on SPI > + bool "SPI support" > + ---help--- > + This module adds support for the SPI interface > + of adapters using WILC chipset. Select this if > + your platform is using the SPI bus. > endchoice > > - > config WILC1000_HW_OOB_INTR > - bool "Use out of band interrupt" > - depends on WILC1000 && WILC1000_SDIO > - default n > - ---help--- > - If your platform don't recognize SDIO IRQ, connect chipset > external IRQ pin > - and check this option. Or, Use this to get all interrupts > including SDIO interrupts. > - > + bool "Use out of band interrupt" > + depends on WILC1000 && WILC1000_SDIO > + default n > + ---help--- > + If your platform don't recognize SDIO IRQ, connect chipset external > IRQ pin > + and check this option. Or, Use this to get all interrupts including > SDIO interrupts. > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > -- Nicolas Ferre _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
