On Fri, Oct 30, 2015 at 06:47:10PM +0900, Glen Lee wrote:
> This patch adds new argument net_device and use netdev private data member
> wilc instead of g_linux_wlan, pass dev to the functions also.
>
> Signed-off-by: Glen Lee <glen....@atmel.com>
> ---
> drivers/staging/wilc1000/coreconfigurator.c | 3 +-
> drivers/staging/wilc1000/linux_wlan.c | 86
> ++++++++++++++---------------
> drivers/staging/wilc1000/wilc_wlan.c | 9 ++-
> drivers/staging/wilc1000/wilc_wlan.h | 4 +-
> 4 files changed, 53 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/coreconfigurator.c
> b/drivers/staging/wilc1000/coreconfigurator.c
> index 530d64a..74fb556 100644
> --- a/drivers/staging/wilc1000/coreconfigurator.c
> +++ b/drivers/staging/wilc1000/coreconfigurator.c
> @@ -616,7 +616,8 @@ s32 send_config_pkt(struct net_device *dev, u8 mode,
> struct wid *wids,
> } else if (mode == SET_CFG) {
> for (counter = 0; counter < count; counter++) {
> PRINT_D(CORECONFIG_DBG, "Sending config SET PACKET
> WID:%x\n", wids[counter].id);
> - if (!wilc_wlan_cfg_set(!counter,
> + if (!wilc_wlan_cfg_set(dev,
> + !counter,
> wids[counter].id,
> wids[counter].val,
> wids[counter].size,
> diff --git a/drivers/staging/wilc1000/linux_wlan.c
> b/drivers/staging/wilc1000/linux_wlan.c
> index 4ed324c..6ffa2a1 100644
> --- a/drivers/staging/wilc1000/linux_wlan.c
> +++ b/drivers/staging/wilc1000/linux_wlan.c
> @@ -662,53 +662,53 @@ static int linux_wlan_init_test_config(struct
> net_device *dev, struct wilc *p_ni
>
> *(int *)c_val = 1;
>
> - if (!wilc_wlan_cfg_set(1, WID_SET_DRV_HANDLER, c_val, 4, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 1, WID_SET_DRV_HANDLER, c_val, 4, 0, 0))
> goto _fail_;
>
> /*to tell fw that we are going to use PC test - WILC specific*/
> c_val[0] = 0;
> - if (!wilc_wlan_cfg_set(0, WID_PC_TEST_MODE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_PC_TEST_MODE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = INFRASTRUCTURE;
> - if (!wilc_wlan_cfg_set(0, WID_BSS_TYPE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_BSS_TYPE, c_val, 1, 0, 0))
> goto _fail_;
>
> /* c_val[0] = RATE_AUTO; */
> c_val[0] = RATE_AUTO;
> - if (!wilc_wlan_cfg_set(0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = G_MIXED_11B_2_MODE;
> - if (!wilc_wlan_cfg_set(0, WID_11G_OPERATING_MODE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11G_OPERATING_MODE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 1;
> - if (!wilc_wlan_cfg_set(0, WID_CURRENT_CHANNEL, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_CURRENT_CHANNEL, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = G_SHORT_PREAMBLE;
> - if (!wilc_wlan_cfg_set(0, WID_PREAMBLE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_PREAMBLE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = AUTO_PROT;
> - if (!wilc_wlan_cfg_set(0, WID_11N_PROT_MECH, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_PROT_MECH, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = ACTIVE_SCAN;
> - if (!wilc_wlan_cfg_set(0, WID_SCAN_TYPE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_SCAN_TYPE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = SITE_SURVEY_OFF;
> - if (!wilc_wlan_cfg_set(0, WID_SITE_SURVEY, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_SITE_SURVEY, c_val, 1, 0, 0))
> goto _fail_;
>
> *((int *)c_val) = 0xffff; /* Never use RTS-CTS */
> - if (!wilc_wlan_cfg_set(0, WID_RTS_THRESHOLD, c_val, 2, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_RTS_THRESHOLD, c_val, 2, 0, 0))
> goto _fail_;
>
> *((int *)c_val) = 2346;
> - if (!wilc_wlan_cfg_set(0, WID_FRAG_THRESHOLD, c_val, 2, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_FRAG_THRESHOLD, c_val, 2, 0, 0))
> goto _fail_;
>
> /* SSID
> */
> @@ -719,23 +719,23 @@ static int linux_wlan_init_test_config(struct
> net_device *dev, struct wilc *p_ni
> /* to enable Broadcast SSID suppport )
> */
> /* --------------------------------------------------------------
> */
> c_val[0] = 0;
> - if (!wilc_wlan_cfg_set(0, WID_BCAST_SSID, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_BCAST_SSID, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 1;
> - if (!wilc_wlan_cfg_set(0, WID_QOS_ENABLE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_QOS_ENABLE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = NO_POWERSAVE;
> - if (!wilc_wlan_cfg_set(0, WID_POWER_MANAGEMENT, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_POWER_MANAGEMENT, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = NO_ENCRYPT; /* NO_ENCRYPT, 0x79 */
> - if (!wilc_wlan_cfg_set(0, WID_11I_MODE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11I_MODE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = OPEN_SYSTEM;
> - if (!wilc_wlan_cfg_set(0, WID_AUTH_TYPE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_AUTH_TYPE, c_val, 1, 0, 0))
> goto _fail_;
>
> /* WEP/802 11I Configuration
> */
> @@ -747,7 +747,7 @@ static int linux_wlan_init_test_config(struct net_device
> *dev, struct wilc *p_ni
> /* ------------------------------------------------------------------
> */
>
> strcpy(c_val, "123456790abcdef1234567890");
> - if (!wilc_wlan_cfg_set(0, WID_WEP_KEY_VALUE, c_val, (strlen(c_val) +
> 1), 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_WEP_KEY_VALUE, c_val, (strlen(c_val)
> + 1), 0, 0))
> goto _fail_;
>
> /* WEP/802 11I Configuration
> */
> @@ -757,7 +757,7 @@ static int linux_wlan_init_test_config(struct net_device
> *dev, struct wilc *p_ni
> /* and less than 64 bytes
> */
> /* ------------------------------------------------------------------
> */
> strcpy(c_val, "12345678");
> - if (!wilc_wlan_cfg_set(0, WID_11I_PSK, c_val, (strlen(c_val)), 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11I_PSK, c_val, (strlen(c_val)), 0,
> 0))
> goto _fail_;
>
> /* IEEE802.1X Key Configuration
> */
> @@ -767,7 +767,7 @@ static int linux_wlan_init_test_config(struct net_device
> *dev, struct wilc *p_ni
> /* and less than 65 bytes
> */
> /* ------------------------------------------------------------------
> */
> strcpy(c_val, "password");
> - if (!wilc_wlan_cfg_set(0, WID_1X_KEY, c_val, (strlen(c_val) + 1), 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_1X_KEY, c_val, (strlen(c_val) + 1),
> 0, 0))
> goto _fail_;
>
> /* IEEE802.1X Server Address Configuration
> */
> @@ -779,31 +779,31 @@ static int linux_wlan_init_test_config(struct
> net_device *dev, struct wilc *p_ni
> c_val[1] = 168;
> c_val[2] = 1;
> c_val[3] = 112;
> - if (!wilc_wlan_cfg_set(0, WID_1X_SERV_ADDR, c_val, 4, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_1X_SERV_ADDR, c_val, 4, 0, 0))
> goto _fail_;
>
> c_val[0] = 3;
> - if (!wilc_wlan_cfg_set(0, WID_LISTEN_INTERVAL, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_LISTEN_INTERVAL, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 3;
> - if (!wilc_wlan_cfg_set(0, WID_DTIM_PERIOD, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_DTIM_PERIOD, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = NORMAL_ACK;
> - if (!wilc_wlan_cfg_set(0, WID_ACK_POLICY, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_ACK_POLICY, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 0;
> - if (!wilc_wlan_cfg_set(0, WID_USER_CONTROL_ON_TX_POWER, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_USER_CONTROL_ON_TX_POWER, c_val, 1,
> 0, 0))
> goto _fail_;
>
> c_val[0] = 48;
> - if (!wilc_wlan_cfg_set(0, WID_TX_POWER_LEVEL_11A, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_TX_POWER_LEVEL_11A, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 28;
> - if (!wilc_wlan_cfg_set(0, WID_TX_POWER_LEVEL_11B, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_TX_POWER_LEVEL_11B, c_val, 1, 0, 0))
> goto _fail_;
>
> /* Beacon Interval
> */
> @@ -813,11 +813,11 @@ static int linux_wlan_init_test_config(struct
> net_device *dev, struct wilc *p_ni
> /*
> -------------------------------------------------------------------- */
>
> *((int *)c_val) = 100;
> - if (!wilc_wlan_cfg_set(0, WID_BEACON_INTERVAL, c_val, 2, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_BEACON_INTERVAL, c_val, 2, 0, 0))
> goto _fail_;
>
> c_val[0] = REKEY_DISABLE;
> - if (!wilc_wlan_cfg_set(0, WID_REKEY_POLICY, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_REKEY_POLICY, c_val, 1, 0, 0))
> goto _fail_;
>
> /* Rekey Time (s) (Used only when the Rekey policy is 2 or 4)
> */
> @@ -826,7 +826,7 @@ static int linux_wlan_init_test_config(struct net_device
> *dev, struct wilc *p_ni
> /* Values to set : 32-bit value
> */
> /*
> -------------------------------------------------------------------- */
> *((int *)c_val) = 84600;
> - if (!wilc_wlan_cfg_set(0, WID_REKEY_PERIOD, c_val, 4, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_REKEY_PERIOD, c_val, 4, 0, 0))
> goto _fail_;
>
> /* Rekey Packet Count (in 1000s; used when Rekey Policy is 3)
> */
> @@ -835,59 +835,59 @@ static int linux_wlan_init_test_config(struct
> net_device *dev, struct wilc *p_ni
> /* Values to set : 32-bit Value
> */
> /*
> -------------------------------------------------------------------- */
> *((int *)c_val) = 500;
> - if (!wilc_wlan_cfg_set(0, WID_REKEY_PACKET_COUNT, c_val, 4, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_REKEY_PACKET_COUNT, c_val, 4, 0, 0))
> goto _fail_;
>
> c_val[0] = 1;
> - if (!wilc_wlan_cfg_set(0, WID_SHORT_SLOT_ALLOWED, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_SHORT_SLOT_ALLOWED, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = G_SELF_CTS_PROT;
> - if (!wilc_wlan_cfg_set(0, WID_11N_ERP_PROT_TYPE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_ERP_PROT_TYPE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 1; /* Enable N */
> - if (!wilc_wlan_cfg_set(0, WID_11N_ENABLE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_ENABLE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = HT_MIXED_MODE;
> - if (!wilc_wlan_cfg_set(0, WID_11N_OPERATING_MODE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_OPERATING_MODE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 1; /* TXOP Prot disable in N mode: No RTS-CTS on TX
> A-MPDUs to save air-time. */
> - if (!wilc_wlan_cfg_set(0, WID_11N_TXOP_PROT_DISABLE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_TXOP_PROT_DISABLE, c_val, 1, 0,
> 0))
> goto _fail_;
>
> memcpy(c_val, mac_add, 6);
>
> - if (!wilc_wlan_cfg_set(0, WID_MAC_ADDR, c_val, 6, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_MAC_ADDR, c_val, 6, 0, 0))
> goto _fail_;
>
> /**
> * AP only
> **/
> c_val[0] = DETECT_PROTECT_REPORT;
> - if (!wilc_wlan_cfg_set(0, WID_11N_OBSS_NONHT_DETECTION, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_OBSS_NONHT_DETECTION, c_val, 1,
> 0, 0))
> goto _fail_;
>
> c_val[0] = RTS_CTS_NONHT_PROT;
> - if (!wilc_wlan_cfg_set(0, WID_11N_HT_PROT_TYPE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_HT_PROT_TYPE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 0;
> - if (!wilc_wlan_cfg_set(0, WID_11N_RIFS_PROT_ENABLE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_RIFS_PROT_ENABLE, c_val, 1, 0,
> 0))
> goto _fail_;
>
> c_val[0] = MIMO_MODE;
> - if (!wilc_wlan_cfg_set(0, WID_11N_SMPS_MODE, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_SMPS_MODE, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 7;
> - if (!wilc_wlan_cfg_set(0, WID_11N_CURRENT_TX_MCS, c_val, 1, 0, 0))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_CURRENT_TX_MCS, c_val, 1, 0, 0))
> goto _fail_;
>
> c_val[0] = 1; /* Enable N with immediate block ack. */
> - if (!wilc_wlan_cfg_set(0, WID_11N_IMMEDIATE_BA_ENABLED, c_val, 1, 1, 1))
> + if (!wilc_wlan_cfg_set(dev, 0, WID_11N_IMMEDIATE_BA_ENABLED, c_val, 1,
> 1, 1))
> goto _fail_;
>
> return 0;
> diff --git a/drivers/staging/wilc1000/wilc_wlan.c
> b/drivers/staging/wilc1000/wilc_wlan.c
> index 768fd30..a72fa8c 100644
> --- a/drivers/staging/wilc1000/wilc_wlan.c
> +++ b/drivers/staging/wilc1000/wilc_wlan.c
> @@ -1768,13 +1768,16 @@ static int wilc_wlan_cfg_commit(int type, u32
> drvHandler)
> return 0;
> }
>
> -int wilc_wlan_cfg_set(int start, u32 wid, u8 *buffer, u32 buffer_size,
> - int commit, u32 drvHandler)
> +int wilc_wlan_cfg_set(struct net_device *dev, int start, u32 wid, u8 *buffer,
> + u32 buffer_size, int commit, u32 drvHandler)
> {
> wilc_wlan_dev_t *p = &g_wlan;
> u32 offset;
> int ret_size;
> + perInterface_wlan_t *nic = netdev_priv(dev);
> + struct wilc *wilc;
>
> + wilc = nic->wilc;
Again here, pass in a struct wilc *.
I've stopped reviewing the series now, odds are all of these need to be
changed in this manner, please do so.
thanks,
greg k-h
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
