BIT macro is used for defining BIT location instead of shifting operator - coding style issue
Signed-off-by: Ranjith <ranjithec...@gmail.com> --- drivers/staging/comedi/drivers/me_daq.c | 134 +++++++++++++++---------------- 1 file changed, 67 insertions(+), 67 deletions(-) diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c index 9ea1ba4..9f359b2 100644 --- a/drivers/staging/comedi/drivers/me_daq.c +++ b/drivers/staging/comedi/drivers/me_daq.c @@ -42,80 +42,80 @@ #define XILINX_DOWNLOAD_RESET 0x42 /* Xilinx registers */ #define ME_CONTROL_1 0x0000 /* - | W */ -#define INTERRUPT_ENABLE (1<<15) -#define COUNTER_B_IRQ (1<<12) -#define COUNTER_A_IRQ (1<<11) -#define CHANLIST_READY_IRQ (1<<10) -#define EXT_IRQ (1<<9) -#define ADFIFO_HALFFULL_IRQ (1<<8) -#define SCAN_COUNT_ENABLE (1<<5) -#define SIMULTANEOUS_ENABLE (1<<4) -#define TRIGGER_FALLING_EDGE (1<<3) -#define CONTINUOUS_MODE (1<<2) -#define DISABLE_ADC (0<<0) -#define SOFTWARE_TRIGGERED_ADC (1<<0) -#define SCAN_TRIGGERED_ADC (2<<0) -#define EXT_TRIGGERED_ADC (3<<0) +#define INTERRUPT_ENABLE BIT(15) +#define COUNTER_B_IRQ BIT(12) +#define COUNTER_A_IRQ BIT(11) +#define CHANLIST_READY_IRQ BIT(10) +#define EXT_IRQ BIT(9) +#define ADFIFO_HALFFULL_IRQ BIT(8) +#define SCAN_COUNT_ENABLE BIT(5) +#define SIMULTANEOUS_ENABLE BIT(4) +#define TRIGGER_FALLING_EDGE BIT(3) +#define CONTINUOUS_MODE BIT(2) +#define DISABLE_ADC 0 +#define SOFTWARE_TRIGGERED_ADC BIT(0) +#define SCAN_TRIGGERED_ADC (BIT(1) & (~(BIT(0)))) +#define EXT_TRIGGERED_ADC (BIT(1) | BIT(0)) #define ME_ADC_START 0x0000 /* R | - */ #define ME_CONTROL_2 0x0002 /* - | W */ -#define ENABLE_ADFIFO (1<<10) -#define ENABLE_CHANLIST (1<<9) -#define ENABLE_PORT_B (1<<7) -#define ENABLE_PORT_A (1<<6) -#define ENABLE_COUNTER_B (1<<4) -#define ENABLE_COUNTER_A (1<<3) -#define ENABLE_DAC (1<<1) -#define BUFFERED_DAC (1<<0) +#define ENABLE_ADFIFO BIT(10) +#define ENABLE_CHANLIST BIT(9) +#define ENABLE_PORT_B BIT(7) +#define ENABLE_PORT_A BIT(6) +#define ENABLE_COUNTER_B BIT(4) +#define ENABLE_COUNTER_A BIT(3) +#define ENABLE_DAC BIT(1) +#define BUFFERED_DAC BIT(0) #define ME_DAC_UPDATE 0x0002 /* R | - */ -#define ME_STATUS 0x0004 /* R | - */ -#define COUNTER_B_IRQ_PENDING (1<<12) -#define COUNTER_A_IRQ_PENDING (1<<11) -#define CHANLIST_READY_IRQ_PENDING (1<<10) -#define EXT_IRQ_PENDING (1<<9) -#define ADFIFO_HALFFULL_IRQ_PENDING (1<<8) -#define ADFIFO_FULL (1<<4) -#define ADFIFO_HALFFULL (1<<3) -#define ADFIFO_EMPTY (1<<2) -#define CHANLIST_FULL (1<<1) -#define FST_ACTIVE (1<<0) -#define ME_RESET_INTERRUPT 0x0004 /* - | W */ -#define ME_DIO_PORT_A 0x0006 /* R | W */ -#define ME_DIO_PORT_B 0x0008 /* R | W */ -#define ME_TIMER_DATA_0 0x000A /* - | W */ -#define ME_TIMER_DATA_1 0x000C /* - | W */ -#define ME_TIMER_DATA_2 0x000E /* - | W */ -#define ME_CHANNEL_LIST 0x0010 /* - | W */ -#define ADC_UNIPOLAR (1<<6) -#define ADC_GAIN_0 (0<<4) -#define ADC_GAIN_1 (1<<4) -#define ADC_GAIN_2 (2<<4) -#define ADC_GAIN_3 (3<<4) -#define ME_READ_AD_FIFO 0x0010 /* R | - */ -#define ME_DAC_CONTROL 0x0012 /* - | W */ -#define DAC_UNIPOLAR_D (0<<4) -#define DAC_BIPOLAR_D (1<<4) -#define DAC_UNIPOLAR_C (0<<5) -#define DAC_BIPOLAR_C (1<<5) -#define DAC_UNIPOLAR_B (0<<6) -#define DAC_BIPOLAR_B (1<<6) -#define DAC_UNIPOLAR_A (0<<7) -#define DAC_BIPOLAR_A (1<<7) -#define DAC_GAIN_0_D (0<<8) -#define DAC_GAIN_1_D (1<<8) -#define DAC_GAIN_0_C (0<<9) -#define DAC_GAIN_1_C (1<<9) -#define DAC_GAIN_0_B (0<<10) -#define DAC_GAIN_1_B (1<<10) -#define DAC_GAIN_0_A (0<<11) -#define DAC_GAIN_1_A (1<<11) -#define ME_DAC_CONTROL_UPDATE 0x0012 /* R | - */ +#define ME_STATUS 0x0004 /* R | - */ +#define COUNTER_B_IRQ_PENDING BIT(12) +#define COUNTER_A_IRQ_PENDING BIT(11) +#define CHANLIST_READY_IRQ_PENDING BIT(10) +#define EXT_IRQ_PENDING BIT(9) +#define ADFIFO_HALFFULL_IRQ_PENDING BIT(8) +#define ADFIFO_FULL BIT(4) +#define ADFIFO_HALFFULL BIT(3) +#define ADFIFO_EMPTY BIT(2) +#define CHANLIST_FULL BIT(1) +#define FST_ACTIVE BIT(0) +#define ME_RESET_INTERRUPT 0x0004 /* - | W */ +#define ME_DIO_PORT_A 0x0006 /* R | W */ +#define ME_DIO_PORT_B 0x0008 /* R | W */ +#define ME_TIMER_DATA_0 0x000A /* - | W */ +#define ME_TIMER_DATA_1 0x000C /* - | W */ +#define ME_TIMER_DATA_2 0x000E /* - | W */ +#define ME_CHANNEL_LIST 0x0010 /* - | W */ +#define ADC_UNIPOLAR BIT(6) +#define ADC_GAIN_0 0 +#define ADC_GAIN_1 BIT(4) +#define ADC_GAIN_2 (BIT(5) & (~BIT(4))) +#define ADC_GAIN_3 (BIT(4) | BIT(5)) +#define ME_READ_AD_FIFO 0x0010 /* R | - */ +#define ME_DAC_CONTROL 0x0012 /* - | W */ +#define DAC_UNIPOLAR_D 0 +#define DAC_BIPOLAR_D BIT(4) +#define DAC_UNIPOLAR_C 0 +#define DAC_BIPOLAR_C BIT(5) +#define DAC_UNIPOLAR_B 0 +#define DAC_BIPOLAR_B BIT(6) +#define DAC_UNIPOLAR_A 0 +#define DAC_BIPOLAR_A BIT(7) +#define DAC_GAIN_0_D 0 +#define DAC_GAIN_1_D BIT(8) +#define DAC_GAIN_0_C 0 +#define DAC_GAIN_1_C BIT(9) +#define DAC_GAIN_0_B 0 +#define DAC_GAIN_1_B BIT(10) +#define DAC_GAIN_0_A 0 +#define DAC_GAIN_1_A BIT(11) +#define ME_DAC_CONTROL_UPDATE 0x0012 /* R | - */ #define ME_DAC_DATA_A 0x0014 /* - | W */ #define ME_DAC_DATA_B 0x0016 /* - | W */ #define ME_DAC_DATA_C 0x0018 /* - | W */ #define ME_DAC_DATA_D 0x001A /* - | W */ -#define ME_COUNTER_ENDDATA_A 0x001C /* - | W */ -#define ME_COUNTER_ENDDATA_B 0x001E /* - | W */ -#define ME_COUNTER_STARTDATA_A 0x0020 /* - | W */ +#define ME_COUNTER_ENDDATA_A 0x001C /* - | W */ +#define ME_COUNTER_ENDDATA_B 0x001E /* - | W */ +#define ME_COUNTER_STARTDATA_A 0x0020 /* - | W */ #define ME_COUNTER_VALUE_A 0x0020 /* R | - */ #define ME_COUNTER_STARTDATA_B 0x0022 /* - | W */ #define ME_COUNTER_VALUE_B 0x0022 /* R | - */ -- 1.7.10.4 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
