Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com>
---
drivers/mtd/nand/fsl_elbc_nand.c | 83 +++++++++++++++++++++++-----------------
1 file changed, 47 insertions(+), 36 deletions(-)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 059d5f7..487eae0 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -79,32 +79,53 @@ struct fsl_elbc_fcm_ctrl {
/* These map to the positions used by the FCM hardware ECC generator */
-/* Small Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
- .eccbytes = 3,
- .eccpos = {6, 7, 8},
- .oobfree = { {0, 5}, {9, 7} },
-};
+static int fsl_elbc_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
-/* Small Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
- .eccbytes = 3,
- .eccpos = {8, 9, 10},
- .oobfree = { {0, 5}, {6, 2}, {11, 5} },
-};
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
-/* Large Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
- .eccbytes = 12,
- .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
- .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-};
+ oobregion->offset = (16 * section) + 6;
+ if (priv->fmr & FMR_ECCM)
+ oobregion->offset += 2;
-/* Large Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
- .eccbytes = 12,
- .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
- .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int fsl_elbc_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
+
+ if (section > chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ if (mtd->writesize > 512)
+ oobregion->offset++;
+ oobregion->length = (priv->fmr & FMR_ECCM) ? 7 : 5;
+ } else {
+ oobregion->offset = (16 * section) -
+ ((priv->fmr & FMR_ECCM) ? 5 : 7);
+ if (section < chip->ecc.steps)
+ oobregion->length = 13;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_elbc_ooblayout_ops = {
+ .ecc = fsl_elbc_ooblayout_ecc,
+ .free = fsl_elbc_ooblayout_free,
};
/*
@@ -657,8 +678,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
chip->ecc.bytes);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
chip->ecc.total);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
- chip->ecc.layout);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
+ mtd->ooblayout);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
@@ -675,14 +696,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
} else if (mtd->writesize == 2048) {
priv->page_size = 1;
setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
- /* adjust ecc setup if needed */
- if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
- BR_DECC_CHK_GEN) {
- chip->ecc.size = 512;
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_lp_eccm1 :
- &fsl_elbc_oob_lp_eccm0;
- }
} else {
dev_err(priv->dev,
"fsl_elbc_init: page size %d is not supported\n",
@@ -780,9 +793,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
chip->ecc.mode = NAND_ECC_HW;
- /* put in small page settings and adjust later if needed */
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
+ mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
--
2.5.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
