Most of the mite registers are only accessed by the mite driver.
There is no reason to expose the register/bit info. Remove this
info from the header.
For aesthetics, convert the bit info enums into defines and use
the BIT() macro to define them. Tidy up the inline functions for
the retry limit and drq reqs bits in the config registers.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/mite.c | 160 +++++++++++++++++++++++++++--
drivers/staging/comedi/drivers/mite.h | 186 ----------------------------------
2 files changed, 151 insertions(+), 195 deletions(-)
diff --git a/drivers/staging/comedi/drivers/mite.c
b/drivers/staging/comedi/drivers/mite.c
index 2dcfa76..748f3ab 100644
--- a/drivers/staging/comedi/drivers/mite.c
+++ b/drivers/staging/comedi/drivers/mite.c
@@ -46,11 +46,142 @@
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/log2.h>
#include "../comedi_pci.h"
#include "mite.h"
+/*
+ * Mite registers
+ */
+#define MITE_UNKNOWN_DMA_BURST_REG 0x28
+#define UNKNOWN_DMA_BURST_ENABLE_BITS 0x600
+
+#define MITE_PCI_CONFIG_OFFSET 0x300
+#define MITE_CSIGR 0x460 /* chip signature */
+#define CSIGR_TO_IOWINS(x) (((x) >> 29) & 0x7)
+#define CSIGR_TO_WINS(x) (((x) >> 24) & 0x1f)
+#define CSIGR_TO_WPDEP(x) (((x) >> 20) & 0x7)
+#define CSIGR_TO_DMAC(x) (((x) >> 16) & 0xf)
+#define CSIGR_TO_IMODE(x) (((x) >> 12) & 0x3) /* pci=0x3 */
+#define CSIGR_TO_MMODE(x) (((x) >> 8) & 0x3) /* minimite=1 */
+#define CSIGR_TO_TYPE(x) (((x) >> 4) & 0xf) /* mite=0, minimite=1 */
+#define CSIGR_TO_VER(x) (((x) >> 0) & 0xf)
+
+#define MITE_CHAN(x) (0x500 + 0x100 * (x))
+#define MITE_CHOR(x) (0x00 + MITE_CHAN(x)) /* channel operation */
+#define CHOR_DMARESET BIT(31)
+#define CHOR_SET_SEND_TC BIT(11)
+#define CHOR_CLR_SEND_TC BIT(10)
+#define CHOR_SET_LPAUSE BIT(9)
+#define CHOR_CLR_LPAUSE BIT(8)
+#define CHOR_CLRDONE BIT(7)
+#define CHOR_CLRRB BIT(6)
+#define CHOR_CLRLC BIT(5)
+#define CHOR_FRESET BIT(4)
+#define CHOR_ABORT BIT(3) /* stop without emptying fifo */
+#define CHOR_STOP BIT(2) /* stop after emptying fifo */
+#define CHOR_CONT BIT(1)
+#define CHOR_START BIT(0)
+#define MITE_CHCR(x) (0x04 + MITE_CHAN(x)) /* channel control */
+#define CHCR_SET_DMA_IE BIT(31)
+#define CHCR_CLR_DMA_IE BIT(30)
+#define CHCR_SET_LINKP_IE BIT(29)
+#define CHCR_CLR_LINKP_IE BIT(28)
+#define CHCR_SET_SAR_IE BIT(27)
+#define CHCR_CLR_SAR_IE BIT(26)
+#define CHCR_SET_DONE_IE BIT(25)
+#define CHCR_CLR_DONE_IE BIT(24)
+#define CHCR_SET_MRDY_IE BIT(23)
+#define CHCR_CLR_MRDY_IE BIT(22)
+#define CHCR_SET_DRDY_IE BIT(21)
+#define CHCR_CLR_DRDY_IE BIT(20)
+#define CHCR_SET_LC_IE BIT(19)
+#define CHCR_CLR_LC_IE BIT(18)
+#define CHCR_SET_CONT_RB_IE BIT(17)
+#define CHCR_CLR_CONT_RB_IE BIT(16)
+#define CHCR_FIFO(x) (((x) & 0x1) << 15)
+#define CHCR_FIFODIS CHCR_FIFO(1)
+#define CHCR_FIFO_ON CHCR_FIFO(0)
+#define CHCR_BURST(x) (((x) & 0x1) << 14)
+#define CHCR_BURSTEN CHCR_BURST(1)
+#define CHCR_NO_BURSTEN CHCR_BURST(0)
+#define CHCR_BYTE_SWAP_DEVICE BIT(6)
+#define CHCR_BYTE_SWAP_MEMORY BIT(4)
+#define CHCR_DIR(x) (((x) & 0x1) << 3)
+#define CHCR_DEV_TO_MEM CHCR_DIR(1)
+#define CHCR_MEM_TO_DEV CHCR_DIR(0)
+#define CHCR_MODE(x) (((x) & 0x7) << 0)
+#define CHCR_NORMAL CHCR_MODE(0)
+#define CHCR_CONTINUE CHCR_MODE(1)
+#define CHCR_RINGBUFF CHCR_MODE(2)
+#define CHCR_LINKSHORT CHCR_MODE(4)
+#define CHCR_LINKLONG CHCR_MODE(5)
+#define MITE_TCR(x) (0x08 + MITE_CHAN(x)) /* transfer count */
+#define MITE_MCR(x) (0x0c + MITE_CHAN(x)) /* memory config */
+#define MITE_MAR(x) (0x10 + MITE_CHAN(x)) /* memory address */
+#define MITE_DCR(x) (0x14 + MITE_CHAN(x)) /* device config */
+#define DCR_NORMAL BIT(29)
+#define MITE_DAR(x) (0x18 + MITE_CHAN(x)) /* device address */
+#define MITE_LKCR(x) (0x1c + MITE_CHAN(x)) /* link config */
+#define MITE_LKAR(x) (0x20 + MITE_CHAN(x)) /* link address */
+#define MITE_LLKAR(x) (0x24 + MITE_CHAN(x)) /* see tnt5002 manual */
+#define MITE_BAR(x) (0x28 + MITE_CHAN(x)) /* base address */
+#define MITE_BCR(x) (0x2c + MITE_CHAN(x)) /* base count */
+#define MITE_SAR(x) (0x30 + MITE_CHAN(x)) /* ? address */
+#define MITE_WSCR(x) (0x34 + MITE_CHAN(x)) /* ? */
+#define MITE_WSER(x) (0x38 + MITE_CHAN(x)) /* ? */
+#define MITE_CHSR(x) (0x3c + MITE_CHAN(x)) /* channel status */
+#define MITE_FCR(x) (0x40 + MITE_CHAN(x)) /* fifo count */
+
+/* common bits for the memory/device/link config registers */
+#define CR_RL(x) (((x) & 0x7) << 21)
+#define CR_REQS(x) (((x) & 0x7) << 16)
+#define CR_REQS_MASK CR_REQS(7)
+#define CR_ASEQ(x) (((x) & 0x3) << 10)
+#define CR_ASEQDONT CR_ASEQ(0)
+#define CR_ASEQUP CR_ASEQ(1)
+#define CR_ASEQDOWN CR_ASEQ(2)
+#define CR_ASEQ_MASK CR_ASEQ(3)
+#define CR_PSIZE(x) (((x) & 0x3) << 8)
+#define CR_PSIZE8 CR_PSIZE(1)
+#define CR_PSIZE16 CR_PSIZE(2)
+#define CR_PSIZE32 CR_PSIZE(3)
+#define CR_PORT(x) (((x) & 0x3) << 6)
+#define CR_PORTCPU CR_PORT(0)
+#define CR_PORTIO CR_PORT(1)
+#define CR_PORTVXI CR_PORT(2)
+#define CR_PORTMXI CR_PORT(3)
+#define CR_AMDEVICE BIT(0)
+
+static unsigned int MITE_IODWBSR_1_WSIZE_bits(unsigned int size)
+{
+ unsigned int order = 0;
+
+ BUG_ON(size == 0);
+ order = ilog2(size);
+ BUG_ON(order < 1);
+ return (order - 1) & 0x1f;
+}
+
+static unsigned int mite_retry_limit(unsigned int retry_limit)
+{
+ unsigned int value = 0;
+
+ if (retry_limit)
+ value = 1 + ilog2(retry_limit);
+ if (value > 0x7)
+ value = 0x7;
+ return CR_RL(value);
+}
+
+static unsigned int mite_drq_reqs(unsigned int drq_line)
+{
+ /* This also works on m-series when using channels (drq_line) 4 or 5. */
+ return CR_REQS((drq_line & 0x3) | 0x4);
+}
+
static void mite_dma_reset(struct mite_channel *mite_chan)
{
writel(CHOR_DMARESET | CHOR_FRESET,
@@ -78,12 +209,19 @@ EXPORT_SYMBOL_GPL(mite_alloc);
static void dump_chip_signature(u32 csigr_bits)
{
+ unsigned int wpdep;
+
+ /* get the wpdep bits and convert it to the write port fifo depth */
+ wpdep = CSIGR_TO_WPDEP(csigr_bits);
+ if (wpdep)
+ wpdep = BIT(wpdep);
+
pr_info("version = %i, type = %i, mite mode = %i, interface mode =
%i\n",
- mite_csigr_version(csigr_bits), mite_csigr_type(csigr_bits),
- mite_csigr_mmode(csigr_bits), mite_csigr_imode(csigr_bits));
+ CSIGR_TO_VER(csigr_bits), CSIGR_TO_TYPE(csigr_bits),
+ CSIGR_TO_MMODE(csigr_bits), CSIGR_TO_IMODE(csigr_bits));
pr_info("num channels = %i, write post fifo depth = %i, wins = %i,
iowins = %i\n",
- mite_csigr_dmac(csigr_bits), mite_csigr_wpdep(csigr_bits),
- mite_csigr_wins(csigr_bits), mite_csigr_iowins(csigr_bits));
+ CSIGR_TO_DMAC(csigr_bits), wpdep,
+ CSIGR_TO_WINS(csigr_bits), CSIGR_TO_IOWINS(csigr_bits));
}
static unsigned int mite_fifo_size(struct mite_struct *mite,
@@ -141,6 +279,10 @@ int mite_setup2(struct comedi_device *dev,
* of 0x61f and bursts worked. 6281 powered up with register value of
* 0x1f and bursts didn't work. The NI windows driver reads the
* register, then does a bitwise-or of 0x600 with it and writes it back.
+ *
+ * The bits 0x90180700 in MITE_UNKNOWN_DMA_BURST_REG can be
+ * written and read back. The bits 0x1f always read as 1.
+ * The rest always read as zero.
*/
unknown_dma_burst_bits =
readl(mite->mite_io_addr + MITE_UNKNOWN_DMA_BURST_REG);
@@ -149,7 +291,7 @@ int mite_setup2(struct comedi_device *dev,
mite->mite_io_addr + MITE_UNKNOWN_DMA_BURST_REG);
csigr_bits = readl(mite->mite_io_addr + MITE_CSIGR);
- mite->num_channels = mite_csigr_dmac(csigr_bits);
+ mite->num_channels = CSIGR_TO_DMAC(csigr_bits);
if (mite->num_channels > MAX_MITE_DMA_CHANNELS) {
dev_warn(dev->class_dev,
"mite: bug? chip claims to have %i dma channels.
Setting to %i.\n",
@@ -426,7 +568,7 @@ void mite_prep_dma(struct mite_channel *mite_chan,
writel(chcr, mite->mite_io_addr + MITE_CHCR(mite_chan->channel));
/* to/from memory */
- mcr = CR_RL(64) | CR_ASEQUP;
+ mcr = mite_retry_limit(64) | CR_ASEQUP;
switch (num_memory_bits) {
case 8:
mcr |= CR_PSIZE8;
@@ -444,8 +586,8 @@ void mite_prep_dma(struct mite_channel *mite_chan,
writel(mcr, mite->mite_io_addr + MITE_MCR(mite_chan->channel));
/* from/to device */
- dcr = CR_RL(64) | CR_ASEQUP;
- dcr |= CR_PORTIO | CR_AMDEVICE | CR_REQSDRQ(mite_chan->channel);
+ dcr = mite_retry_limit(64) | CR_ASEQUP;
+ dcr |= CR_PORTIO | CR_AMDEVICE | mite_drq_reqs(mite_chan->channel);
switch (num_device_bits) {
case 8:
dcr |= CR_PSIZE8;
@@ -466,7 +608,7 @@ void mite_prep_dma(struct mite_channel *mite_chan,
writel(0, mite->mite_io_addr + MITE_DAR(mite_chan->channel));
/* the link is 32bits */
- lkcr = CR_RL(64) | CR_ASEQUP | CR_PSIZE32;
+ lkcr = mite_retry_limit(64) | CR_ASEQUP | CR_PSIZE32;
writel(lkcr, mite->mite_io_addr + MITE_LKCR(mite_chan->channel));
/* starting address for link chaining */
diff --git a/drivers/staging/comedi/drivers/mite.h
b/drivers/staging/comedi/drivers/mite.h
index 406e904..8d20385 100644
--- a/drivers/staging/comedi/drivers/mite.h
+++ b/drivers/staging/comedi/drivers/mite.h
@@ -19,8 +19,6 @@
#ifndef _MITE_H_
#define _MITE_H_
-#include <linux/io.h>
-#include <linux/log2.h>
#include <linux/spinlock.h>
#define MAX_MITE_DMA_CHANNELS 8
@@ -109,199 +107,15 @@ int mite_init_ring_descriptors(struct
mite_dma_descriptor_ring *ring,
unsigned int nbytes);
enum mite_registers {
- /*
- * The bits 0x90180700 in MITE_UNKNOWN_DMA_BURST_REG can be
- * written and read back. The bits 0x1f always read as 1.
- * The rest always read as zero.
- */
- MITE_UNKNOWN_DMA_BURST_REG = 0x28,
MITE_IODWBSR = 0xc0, /* IO Device Window Base Size Register */
MITE_IODWBSR_1 = 0xc4, /* IO Device Window Base Size Register 1 */
MITE_IODWCR_1 = 0xf4,
- MITE_PCI_CONFIG_OFFSET = 0x300,
- MITE_CSIGR = 0x460 /* chip signature */
};
-#define MITE_CHAN(x) (0x500 + 0x100 * (x))
-#define MITE_CHOR(x) (0x00 + MITE_CHAN(x)) /* channel operation */
-#define MITE_CHCR(x) (0x04 + MITE_CHAN(x)) /* channel control */
-#define MITE_TCR(x) (0x08 + MITE_CHAN(x)) /* transfer count */
-#define MITE_MCR(x) (0x0c + MITE_CHAN(x)) /* memory configuration */
-#define MITE_MAR(x) (0x10 + MITE_CHAN(x)) /* memory address */
-#define MITE_DCR(x) (0x14 + MITE_CHAN(x)) /* device configuration */
-#define MITE_DAR(x) (0x18 + MITE_CHAN(x)) /* device address */
-#define MITE_LKCR(x) (0x1c + MITE_CHAN(x)) /* link configuration */
-#define MITE_LKAR(x) (0x20 + MITE_CHAN(x)) /* link address */
-#define MITE_LLKAR(x) (0x24 + MITE_CHAN(x)) /* see tnt5002 manual */
-#define MITE_BAR(x) (0x28 + MITE_CHAN(x)) /* base address */
-#define MITE_BCR(x) (0x2c + MITE_CHAN(x)) /* base count */
-#define MITE_SAR(x) (0x30 + MITE_CHAN(x)) /* ? address */
-#define MITE_WSCR(x) (0x34 + MITE_CHAN(x)) /* ? */
-#define MITE_WSER(x) (0x38 + MITE_CHAN(x)) /* ? */
-#define MITE_CHSR(x) (0x3c + MITE_CHAN(x)) /* channel status */
-#define MITE_FCR(x) (0x40 + MITE_CHAN(x)) /* fifo count */
-
enum MITE_IODWBSR_bits {
WENAB = 0x80, /* window enable */
};
-static inline unsigned int MITE_IODWBSR_1_WSIZE_bits(unsigned int size)
-{
- unsigned int order = 0;
-
- BUG_ON(size == 0);
- order = ilog2(size);
- BUG_ON(order < 1);
- return (order - 1) & 0x1f;
-}
-
-enum MITE_UNKNOWN_DMA_BURST_bits {
- UNKNOWN_DMA_BURST_ENABLE_BITS = 0x600
-};
-
-static inline int mite_csigr_version(u32 csigr_bits)
-{
- return csigr_bits & 0xf;
-};
-
-static inline int mite_csigr_type(u32 csigr_bits)
-{ /* original mite = 0, minimite = 1 */
- return (csigr_bits >> 4) & 0xf;
-};
-
-static inline int mite_csigr_mmode(u32 csigr_bits)
-{ /* mite mode, minimite = 1 */
- return (csigr_bits >> 8) & 0x3;
-};
-
-static inline int mite_csigr_imode(u32 csigr_bits)
-{ /* cpu port interface mode, pci = 0x3 */
- return (csigr_bits >> 12) & 0x3;
-};
-
-static inline int mite_csigr_dmac(u32 csigr_bits)
-{ /* number of dma channels */
- return (csigr_bits >> 16) & 0xf;
-};
-
-static inline int mite_csigr_wpdep(u32 csigr_bits)
-{ /* write post fifo depth */
- unsigned int wpdep_bits = (csigr_bits >> 20) & 0x7;
-
- return (wpdep_bits) ? (1 << (wpdep_bits - 1)) : 0;
-}
-
-static inline int mite_csigr_wins(u32 csigr_bits)
-{
- return (csigr_bits >> 24) & 0x1f;
-};
-
-static inline int mite_csigr_iowins(u32 csigr_bits)
-{ /* number of io windows */
- return (csigr_bits >> 29) & 0x7;
-};
-
-enum MITE_MCR_bits {
- MCRPON = 0,
-};
-
-enum MITE_DCR_bits {
- DCR_NORMAL = (1 << 29),
- DCRPON = 0,
-};
-
-enum MITE_CHOR_bits {
- CHOR_DMARESET = (1 << 31),
- CHOR_SET_SEND_TC = (1 << 11),
- CHOR_CLR_SEND_TC = (1 << 10),
- CHOR_SET_LPAUSE = (1 << 9),
- CHOR_CLR_LPAUSE = (1 << 8),
- CHOR_CLRDONE = (1 << 7),
- CHOR_CLRRB = (1 << 6),
- CHOR_CLRLC = (1 << 5),
- CHOR_FRESET = (1 << 4),
- CHOR_ABORT = (1 << 3), /* stop without emptying fifo */
- CHOR_STOP = (1 << 2), /* stop after emptying fifo */
- CHOR_CONT = (1 << 1),
- CHOR_START = (1 << 0),
- CHOR_PON = (CHOR_CLR_SEND_TC | CHOR_CLR_LPAUSE),
-};
-
-enum MITE_CHCR_bits {
- CHCR_SET_DMA_IE = (1 << 31),
- CHCR_CLR_DMA_IE = (1 << 30),
- CHCR_SET_LINKP_IE = (1 << 29),
- CHCR_CLR_LINKP_IE = (1 << 28),
- CHCR_SET_SAR_IE = (1 << 27),
- CHCR_CLR_SAR_IE = (1 << 26),
- CHCR_SET_DONE_IE = (1 << 25),
- CHCR_CLR_DONE_IE = (1 << 24),
- CHCR_SET_MRDY_IE = (1 << 23),
- CHCR_CLR_MRDY_IE = (1 << 22),
- CHCR_SET_DRDY_IE = (1 << 21),
- CHCR_CLR_DRDY_IE = (1 << 20),
- CHCR_SET_LC_IE = (1 << 19),
- CHCR_CLR_LC_IE = (1 << 18),
- CHCR_SET_CONT_RB_IE = (1 << 17),
- CHCR_CLR_CONT_RB_IE = (1 << 16),
- CHCR_FIFODIS = (1 << 15),
- CHCR_FIFO_ON = 0,
- CHCR_BURSTEN = (1 << 14),
- CHCR_NO_BURSTEN = 0,
- CHCR_BYTE_SWAP_DEVICE = (1 << 6),
- CHCR_BYTE_SWAP_MEMORY = (1 << 4),
- CHCR_DIR = (1 << 3),
- CHCR_DEV_TO_MEM = CHCR_DIR,
- CHCR_MEM_TO_DEV = 0,
- CHCR_NORMAL = (0 << 0),
- CHCR_CONTINUE = (1 << 0),
- CHCR_RINGBUFF = (2 << 0),
- CHCR_LINKSHORT = (4 << 0),
- CHCR_LINKLONG = (5 << 0),
- CHCRPON =
- (CHCR_CLR_DMA_IE | CHCR_CLR_LINKP_IE | CHCR_CLR_SAR_IE |
- CHCR_CLR_DONE_IE | CHCR_CLR_MRDY_IE | CHCR_CLR_DRDY_IE |
- CHCR_CLR_LC_IE | CHCR_CLR_CONT_RB_IE),
-};
-
-enum ConfigRegister_bits {
- CR_REQS_MASK = 0x7 << 16,
- CR_ASEQDONT = 0x0 << 10,
- CR_ASEQUP = 0x1 << 10,
- CR_ASEQDOWN = 0x2 << 10,
- CR_ASEQ_MASK = 0x3 << 10,
- CR_PSIZE8 = (1 << 8),
- CR_PSIZE16 = (2 << 8),
- CR_PSIZE32 = (3 << 8),
- CR_PORTCPU = (0 << 6),
- CR_PORTIO = (1 << 6),
- CR_PORTVXI = (2 << 6),
- CR_PORTMXI = (3 << 6),
- CR_AMDEVICE = (1 << 0),
-};
-
-static inline int CR_REQS(int source)
-{
- return (source & 0x7) << 16;
-};
-
-static inline int CR_REQSDRQ(unsigned int drq_line)
-{
- /* This also works on m-series when using channels (drq_line) 4 or 5. */
- return CR_REQS((drq_line & 0x3) | 0x4);
-}
-
-static inline int CR_RL(unsigned int retry_limit)
-{
- int value = 0;
-
- if (retry_limit)
- value = 1 + ilog2(retry_limit);
- if (value > 0x7)
- value = 0x7;
- return (value & 0x7) << 21;
-}
-
enum CHSR_bits {
CHSR_INT = (1 << 31),
CHSR_LPAUSES = (1 << 29),
--
2.6.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
