On Sun, 17 Jul 2016, SF Markus Elfring wrote:
> From: Markus Elfring <elfr...@users.sourceforge.net>
> Date: Sun, 17 Jul 2016 18:39:03 +0200
>
> Do not use curly brackets at some source code places
> where a single statement should be sufficient.
>
> Signed-off-by: Markus Elfring <elfr...@users.sourceforge.net>
> ---
> drivers/staging/ks7010/ks7010_sdio.c | 48
> ++++++++++++------------------------
> 1 file changed, 16 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/staging/ks7010/ks7010_sdio.c
> b/drivers/staging/ks7010/ks7010_sdio.c
> index b3ca8e2..1e072e3 100644
> --- a/drivers/staging/ks7010/ks7010_sdio.c
> +++ b/drivers/staging/ks7010/ks7010_sdio.c
> @@ -109,9 +109,8 @@ void ks_wlan_hw_sleep_doze_request(struct ks_wlan_private
> *priv)
> DPRINTK(3, "sleep_mode=SLP_SLEEP\n");
> atomic_set(&priv->sleepstatus.status, 1);
> priv->last_doze = jiffies;
> - } else {
> + } else
> DPRINTK(1, "sleep_mode=%d\n", priv->sleep_mode);
> - }
This is a violation of CodingStyle:
This does not apply if only one branch of a conditional statement is a
single
statement; in the latter case use braces in both branches:
if (condition) {
do_this();
do_that();
} else {
otherwise();
}
julia
>
> out:
> priv->sleep_mode = atomic_read(&priv->sleepstatus.status);
> @@ -140,9 +139,8 @@ void ks_wlan_hw_sleep_wakeup_request(struct
> ks_wlan_private *priv)
> atomic_set(&priv->sleepstatus.status, 0);
> priv->last_wakeup = jiffies;
> ++priv->wakeup_count;
> - } else {
> + } else
> DPRINTK(1, "sleep_mode=%d\n", priv->sleep_mode);
> - }
>
> out:
> priv->sleep_mode = atomic_read(&priv->sleepstatus.status);
> @@ -164,10 +162,9 @@ void ks_wlan_hw_wakeup_request(struct ks_wlan_private
> *priv)
> DPRINTK(4, "wake up : WAKEUP=%02X\n", rw_data);
> priv->last_wakeup = jiffies;
> ++priv->wakeup_count;
> - } else {
> + } else
> DPRINTK(1, "psstatus=%d\n",
> atomic_read(&priv->psstatus.status));
> - }
> }
>
> int _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
> @@ -380,10 +377,9 @@ int ks_wlan_hw_tx(struct ks_wlan_private *priv, void *p,
> unsigned long size,
> result = enqueue_txdev(priv, p, size, complete_handler, arg1, arg2);
> spin_unlock(&priv->tx_dev.tx_dev_lock);
>
> - if (cnt_txqbody(priv) > 0) {
> + if (cnt_txqbody(priv) > 0)
> queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
> &priv->ks_wlan_hw.rw_wq, 0);
> - }
> return result;
> }
>
> @@ -399,9 +395,8 @@ static void rx_event_task(unsigned long dev)
> hostif_receive(priv, rp->data, rp->size);
> inc_rxqhead(priv);
>
> - if (cnt_rxqbody(priv) > 0) {
> + if (cnt_rxqbody(priv) > 0)
> tasklet_schedule(&priv->ks_wlan_hw.rx_bh_task);
> - }
> }
>
> return;
> @@ -463,12 +458,11 @@ static void ks_wlan_hw_rx(void *dev, uint16_t size)
> DPRINTK(1, " error : READ_STATUS=%02X\n", read_status);
> DPRINTK(4, "READ_STATUS=%02X\n", read_status);
>
> - if (atomic_read(&priv->psstatus.confirm_wait)) {
> + if (atomic_read(&priv->psstatus.confirm_wait))
> if (IS_HIF_CONF(event)) {
> DPRINTK(4, "IS_HIF_CONF true !!\n");
> atomic_dec(&priv->psstatus.confirm_wait);
> }
> - }
>
> /* rx_event_task((void *)priv); */
> tasklet_schedule(&priv->ks_wlan_hw.rx_bh_task);
> @@ -537,13 +531,11 @@ static void ks7010_rw_function(struct work_struct *work)
> }
> DPRINTK(4, "WSTATUS_RSIZE=%02X\n", rw_data);
>
> - if (rw_data & RSIZE_MASK) { /* Read schedule */
> + if (rw_data & RSIZE_MASK) /* Read schedule */
> ks_wlan_hw_rx((void *)priv,
> (uint16_t) (((rw_data & RSIZE_MASK) << 4)));
> - }
> - if ((rw_data & WSTATUS_MASK)) {
> + if (rw_data & WSTATUS_MASK)
> tx_device_task((void *)priv);
> - }
> _ks_wlan_hw_power_save(priv);
> release_host:
> sdio_release_host(priv->ks_wlan_hw.sdio_card->func);
> @@ -611,10 +603,9 @@ static void ks_sdio_interrupt(struct sdio_func *func)
> }
> DPRINTK(4, "WSTATUS_RSIZE=%02X\n", rw_data);
> rsize = rw_data & RSIZE_MASK;
> - if (rsize) { /* Read schedule */
> + if (rsize) /* Read schedule */
> ks_wlan_hw_rx((void *)priv,
> (uint16_t) (((rsize) << 4)));
> - }
> if (rw_data & WSTATUS_MASK) {
> #if 0
> if (status & INT_WRITE_STATUS
> @@ -625,11 +616,10 @@ static void ks_sdio_interrupt(struct sdio_func *func)
> ks7010_sdio_write(priv, DATA_WINDOW,
> &rw_data,
> sizeof(rw_data));
> - if (retval) {
> + if (retval)
> DPRINTK(1,
> "write DATA_WINDOW
> Failed!!(%d)\n",
> retval);
> - }
> status &= ~INT_WRITE_STATUS;
> } else {
> #endif
> @@ -870,13 +860,11 @@ static void ks7010_card_init(struct ks_wlan_private
> *priv)
> DPRINTK(5, "hostif_sme_enqueu()\n");
>
> if (!wait_for_completion_interruptible_timeout
> - (&priv->confirm_wait, 5 * HZ)) {
> + (&priv->confirm_wait, 5 * HZ))
> DPRINTK(1, "wait time out!! SME_START\n");
> - }
>
> - if (priv->mac_address_valid && priv->version_size) {
> + if (priv->mac_address_valid && priv->version_size)
> priv->dev_state = DEVICE_STATE_PREINIT;
> - }
>
> hostif_sme_enqueue(priv, SME_GET_EEPROM_CKSUM);
>
> @@ -898,16 +886,14 @@ static void ks7010_card_init(struct ks_wlan_private
> *priv)
> hostif_sme_enqueue(priv, SME_START_REQUEST);
>
> if (!wait_for_completion_interruptible_timeout
> - (&priv->confirm_wait, 5 * HZ)) {
> + (&priv->confirm_wait, 5 * HZ))
> DPRINTK(1, "wait time out!! wireless parameter set\n");
> - }
>
> if (priv->dev_state >= DEVICE_STATE_PREINIT) {
> DPRINTK(1, "DEVICE READY!!\n");
> priv->dev_state = DEVICE_STATE_READY;
> - } else {
> + } else
> DPRINTK(1, "dev_state=%d\n", priv->dev_state);
> - }
> }
>
> static void ks7010_init_defaults(struct ks_wlan_private *priv)
> @@ -1057,9 +1043,8 @@ static int ks7010_sdio_probe(struct sdio_func *func,
> sdio_claim_host(func);
> ret = ks7010_sdio_write(priv, INT_PENDING, &rw_data, sizeof(rw_data));
> sdio_release_host(func);
> - if (ret) {
> + if (ret)
> DPRINTK(1, " error : INT_PENDING=%02X\n", rw_data);
> - }
> DPRINTK(4, " clear Interrupt : INT_PENDING=%02X\n", rw_data);
>
> /* enable ks7010sdio interrupt
> (INT_GCR_B|INT_READ_STATUS|INT_WRITE_STATUS) */
> @@ -1067,9 +1052,8 @@ static int ks7010_sdio_probe(struct sdio_func *func,
> sdio_claim_host(func);
> ret = ks7010_sdio_write(priv, INT_ENABLE, &rw_data, sizeof(rw_data));
> sdio_release_host(func);
> - if (ret) {
> + if (ret)
> DPRINTK(1, " error : INT_ENABLE=%02X\n", rw_data);
> - }
> DPRINTK(4, " enable Interrupt : INT_ENABLE=%02X\n", rw_data);
> priv->dev_state = DEVICE_STATE_BOOT;
>
> --
> 2.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
