Fix checkpatch.pl warning "Block comments use a trailing */ on
a separate line" on multiple files of the driver by editing the
affected comments.
Signed-off-by: Raphaël Beamonte <raphael.beamo...@gmail.com>
---
drivers/staging/rtl8712/rtl8712_led.c | 12 ++++--
drivers/staging/rtl8712/rtl8712_recv.c | 54 ++++++++++++++++---------
drivers/staging/rtl8712/rtl8712_recv.h | 3 +-
drivers/staging/rtl8712/rtl8712_spec.h | 3 +-
drivers/staging/rtl8712/rtl8712_syscfg_bitdef.h | 27 ++++++++-----
drivers/staging/rtl8712/rtl8712_xmit.c | 9 +++--
drivers/staging/rtl8712/rtl871x_cmd.h | 9 +++--
drivers/staging/rtl8712/rtl871x_ht.h | 3 +-
drivers/staging/rtl8712/rtl871x_ioctl.h | 3 +-
drivers/staging/rtl8712/rtl871x_ioctl_set.c | 12 ++++--
drivers/staging/rtl8712/rtl871x_led.h | 15 ++++---
drivers/staging/rtl8712/rtl871x_mlme.c | 30 +++++++++-----
drivers/staging/rtl8712/rtl871x_mlme.h | 12 ++++--
drivers/staging/rtl8712/rtl871x_mp.c | 3 +-
drivers/staging/rtl8712/rtl871x_mp.h | 3 +-
drivers/staging/rtl8712/rtl871x_mp_ioctl.h | 39 ++++++++++++------
drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h | 33 ++++++++++-----
drivers/staging/rtl8712/rtl871x_pwrctrl.c | 3 +-
drivers/staging/rtl8712/rtl871x_pwrctrl.h | 3 +-
drivers/staging/rtl8712/rtl871x_recv.c | 24 +++++++----
drivers/staging/rtl8712/rtl871x_recv.h | 9 +++--
drivers/staging/rtl8712/rtl871x_security.h | 24 +++++++----
drivers/staging/rtl8712/rtl871x_sta_mgt.c | 3 +-
drivers/staging/rtl8712/rtl871x_xmit.c | 18 ++++++---
drivers/staging/rtl8712/rtl871x_xmit.h | 12 ++++--
drivers/staging/rtl8712/usb_halinit.c | 3 +-
drivers/staging/rtl8712/usb_intf.c | 12 ++++--
drivers/staging/rtl8712/wifi.h | 15 ++++---
drivers/staging/rtl8712/wlan_bssdef.h | 6 ++-
29 files changed, 268 insertions(+), 134 deletions(-)
diff --git a/drivers/staging/rtl8712/rtl8712_led.c
b/drivers/staging/rtl8712/rtl8712_led.c
index 9055827..76d0535 100644
--- a/drivers/staging/rtl8712/rtl8712_led.c
+++ b/drivers/staging/rtl8712/rtl8712_led.c
@@ -58,10 +58,12 @@ enum _LED_STATE_871x {
LED_POWER_ON_BLINK = 5,
LED_SCAN_BLINK = 6, /* LED is blinking during scanning period,
* the # of times to blink is depend on time
- * for scanning. */
+ * for scanning.
+ */
LED_NO_LINK_BLINK = 7, /* LED is blinking during no link state. */
LED_BLINK_StartToBlink = 8,/* Customized for Sercomm Printer
- * Server case */
+ * Server case
+ */
LED_BLINK_WPS = 9, /* LED is blinkg during WPS communication */
LED_TXRX_BLINK = 10,
LED_BLINK_WPS_STOP = 11, /*for ALPHA */
@@ -110,7 +112,8 @@ static void DeInitLed871x(struct LED_871x *pLed)
{
del_timer_sync(&pLed->BlinkTimer);
/* We should reset bLedBlinkInProgress if we cancel
- * the LedControlTimer, */
+ * the LedControlTimer,
+ */
pLed->bLedBlinkInProgress = false;
}
@@ -827,7 +830,8 @@ static void BlinkTimerCallback(unsigned long data)
struct LED_871x *pLed = (struct LED_871x *)data;
/* This fixed the crash problem on Fedora 12 when trying to do the
- * insmod;ifconfig up;rmmod commands. */
+ * insmod;ifconfig up;rmmod commands.
+ */
if (pLed->padapter->bSurpriseRemoved || pLed->padapter->bDriverStopped)
return;
schedule_work(&pLed->BlinkWorkItem);
diff --git a/drivers/staging/rtl8712/rtl8712_recv.c
b/drivers/staging/rtl8712/rtl8712_recv.c
index f25b34c..4027d1a 100644
--- a/drivers/staging/rtl8712/rtl8712_recv.c
+++ b/drivers/staging/rtl8712/rtl8712_recv.c
@@ -163,7 +163,8 @@ static void update_recvframe_attrib_from_recvstat(struct
rx_pkt_attrib *pattrib,
drvinfo_sz = (le32_to_cpu(prxstat->rxdw0) & 0x000f0000) >> 16;
drvinfo_sz <<= 3;
/*TODO:
- * Offset 0 */
+ * Offset 0
+ */
pattrib->bdecrypted = ((le32_to_cpu(prxstat->rxdw0) & BIT(27)) >> 27)
? 0 : 1;
pattrib->crc_err = (le32_to_cpu(prxstat->rxdw0) & BIT(14)) >> 14;
@@ -210,7 +211,8 @@ static union recv_frame *recvframe_defrag(struct _adapter
*adapter,
curfragnum = 0;
if (curfragnum != pfhdr->attrib.frag_num) {
/*the first fragment number must be 0
- *free the whole queue*/
+ *free the whole queue
+ */
r8712_free_recvframe(prframe, pfree_recv_queue);
r8712_free_recvframe_queue(defrag_q, pfree_recv_queue);
return NULL;
@@ -224,18 +226,21 @@ static union recv_frame *recvframe_defrag(struct _adapter
*adapter,
/*check the fragment sequence (2nd ~n fragment frame) */
if (curfragnum != pnfhdr->attrib.frag_num) {
/* the fragment number must increase (after decache)
- * release the defrag_q & prframe */
+ * release the defrag_q & prframe
+ */
r8712_free_recvframe(prframe, pfree_recv_queue);
r8712_free_recvframe_queue(defrag_q, pfree_recv_queue);
return NULL;
}
curfragnum++;
/* copy the 2nd~n fragment frame's payload to the first fragment
- * get the 2nd~last fragment frame's payload */
+ * get the 2nd~last fragment frame's payload
+ */
wlanhdr_offset = pnfhdr->attrib.hdrlen + pnfhdr->attrib.iv_len;
recvframe_pull(pnextrframe, wlanhdr_offset);
/* append to first fragment frame's tail (if privacy frame,
- * pull the ICV) */
+ * pull the ICV)
+ */
recvframe_pull_tail(prframe, pfhdr->attrib.icv_len);
memcpy(pfhdr->rx_tail, pnfhdr->rx_data, pnfhdr->len);
recvframe_put(prframe, pnfhdr->len);
@@ -278,7 +283,8 @@ union recv_frame *r8712_recvframe_chk_defrag(struct
_adapter *padapter,
prtnframe = precv_frame;/*isn't a fragment frame*/
if (ismfrag == 1) {
/* 0~(n-1) fragment frame
- * enqueue to defraf_g */
+ * enqueue to defraf_g
+ */
if (pdefrag_q != NULL) {
if (fragnum == 0) {
/*the first fragment*/
@@ -294,7 +300,8 @@ union recv_frame *r8712_recvframe_chk_defrag(struct
_adapter *padapter,
prtnframe = NULL;
} else {
/* can't find this ta's defrag_queue, so free this
- * recv_frame */
+ * recv_frame
+ */
r8712_free_recvframe(precv_frame, pfree_recv_queue);
prtnframe = NULL;
}
@@ -302,7 +309,8 @@ union recv_frame *r8712_recvframe_chk_defrag(struct
_adapter *padapter,
}
if ((ismfrag == 0) && (fragnum != 0)) {
/* the last fragment frame
- * enqueue the last fragment */
+ * enqueue the last fragment
+ */
if (pdefrag_q != NULL) {
phead = &pdefrag_q->queue;
list_add_tail(&pfhdr->list, phead);
@@ -311,7 +319,8 @@ union recv_frame *r8712_recvframe_chk_defrag(struct
_adapter *padapter,
prtnframe = precv_frame;
} else {
/* can't find this ta's defrag_queue, so free this
- * recv_frame */
+ * recv_frame
+ */
r8712_free_recvframe(precv_frame, pfree_recv_queue);
prtnframe = NULL;
}
@@ -391,7 +400,8 @@ static int amsdu_to_msdu(struct _adapter *padapter, union
recv_frame *prframe)
eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) ||
!memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE))) {
/* remove RFC1042 or Bridge-Tunnel encapsulation and
- * replace EtherType */
+ * replace EtherType
+ */
skb_pull(sub_skb, SNAP_SIZE);
memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src,
ETH_ALEN);
@@ -530,7 +540,8 @@ int r8712_recv_indicatepkts_in_order(struct _adapter
*padapter,
preorder_ctrl->indicate_seq = pattrib->seq_num;
}
/* Prepare indication list and indication.
- * Check if there is any packet need indicate. */
+ * Check if there is any packet need indicate.
+ */
while (!list_empty(phead)) {
prframe = container_of(plist, union recv_frame, u.list);
pattrib = &prframe->u.hdr.attrib;
@@ -757,7 +768,8 @@ static void query_rx_phy_status(struct _adapter *padapter,
/* Modify the RF RNA gain value to -40, -20,
* -2, 14 by Jenyu's suggestion
* Note: different RF with the different
- * RNA gain. */
+ * RNA gain.
+ */
case 0x3:
rx_pwr_all = -40 - (pcck_buf->cck_agc_rpt &
0x3e);
@@ -842,7 +854,8 @@ static void query_rx_phy_status(struct _adapter *padapter,
total_rssi += rssi;
}
/* (2)PWDB, Average PWDB cacluated by hardware (for
- * rate adaptive) */
+ * rate adaptive)
+ */
rx_pwr_all = (((pphy_head[PHY_STAT_PWDB_ALL_SHT]) >> 1) & 0x7f)
- 106;
pwdb_all = query_rx_pwr_percentage(rx_pwr_all);
@@ -870,7 +883,8 @@ static void query_rx_phy_status(struct _adapter *padapter,
}
/* UI BSS List signal strength(in percentage), make it good looking,
* from 0~100. It is assigned to the BSS List in
- * GetValueFromBeaconOrProbeRsp(). */
+ * GetValueFromBeaconOrProbeRsp().
+ */
if (bcck_rate)
prframe->u.hdr.attrib.signal_strength =
(u8)r8712_signal_scale_mapping(pwdb_all);
@@ -1027,10 +1041,12 @@ static int recvbuf2recvframe(struct _adapter *padapter,
struct sk_buff *pskb)
transfer_len = pskb->len;
/* Test throughput with Netgear 3700 (No security) with Chariot 3T3R
* pairs. The packet count will be a big number so that the containing
- * packet will effect the Rx reordering. */
+ * packet will effect the Rx reordering.
+ */
if (transfer_len < pkt_len) {
/* In this case, it means the MAX_RECVBUF_SZ is too small to
- * get the data from 8712u. */
+ * get the data from 8712u.
+ */
return _FAIL;
}
do {
@@ -1057,14 +1073,16 @@ static int recvbuf2recvframe(struct _adapter *padapter,
struct sk_buff *pskb)
tmp_len = pkt_len + drvinfo_sz + RXDESC_SIZE;
pkt_offset = (u16)round_up(tmp_len, 128);
/* for first fragment packet, driver need allocate 1536 +
- * drvinfo_sz + RXDESC_SIZE to defrag packet. */
+ * drvinfo_sz + RXDESC_SIZE to defrag packet.
+ */
if ((mf == 1) && (frag == 0))
/*1658+6=1664, 1664 is 128 alignment.*/
alloc_sz = max_t(u16, tmp_len, 1658);
else
alloc_sz = tmp_len;
/* 2 is for IP header 4 bytes alignment in QoS packet case.
- * 4 is for skb->data 4 bytes alignment. */
+ * 4 is for skb->data 4 bytes alignment.
+ */
alloc_sz += 6;
pkt_copy = netdev_alloc_skb(padapter->pnetdev, alloc_sz);
if (pkt_copy) {
diff --git a/drivers/staging/rtl8712/rtl8712_recv.h
b/drivers/staging/rtl8712/rtl8712_recv.h
index 925ec74..96ca3e2 100644
--- a/drivers/staging/rtl8712/rtl8712_recv.h
+++ b/drivers/staging/rtl8712/rtl8712_recv.h
@@ -61,7 +61,8 @@ struct recv_stat {
struct phy_cck_rx_status {
/* For CCK rate descriptor. This is a unsigned 8:1 variable.
* LSB bit present 0.5. And MSB 7 bts present a signed value.
- * Range from -64~+63.5. */
+ * Range from -64~+63.5.
+ */
u8 adc_pwdb_X[4];
u8 sq_rpt;
u8 cck_agc_rpt;
diff --git a/drivers/staging/rtl8712/rtl8712_spec.h
b/drivers/staging/rtl8712/rtl8712_spec.h
index af11b44..51e0428 100644
--- a/drivers/staging/rtl8712/rtl8712_spec.h
+++ b/drivers/staging/rtl8712/rtl8712_spec.h
@@ -83,7 +83,8 @@
#define CMD_ADDR_MAPPING_SHIFT 2 /*SDIO CMD ADDR MAPPING,
*shift 2 bit for match
- * offset[14:2]*/
+ * offset[14:2]
+ */
/*Offset for SDIO LOCAL*/
#define OFFSET_SDIO_LOCAL 0x0FFF
diff --git a/drivers/staging/rtl8712/rtl8712_syscfg_bitdef.h
b/drivers/staging/rtl8712/rtl8712_syscfg_bitdef.h
index eed09c8..2e66d28 100644
--- a/drivers/staging/rtl8712/rtl8712_syscfg_bitdef.h
+++ b/drivers/staging/rtl8712/rtl8712_syscfg_bitdef.h
@@ -68,11 +68,13 @@
#define SYS_CLKSEL BIT(SYS_CLKSEL_SHT) /* System Clock 80MHz*/
#define PS_CLKSEL_SHT 1
#define PS_CLKSEL BIT(PS_CLKSEL_SHT) /*System power save
- * clock select.*/
+ * clock select.
+ */
#define CPU_CLKSEL_SHT 2
#define CPU_CLKSEL BIT(CPU_CLKSEL_SHT) /* System Clock select,
* 1: AFE source,
- * 0: System clock(L-Bus)*/
+ * 0: System clock(L-Bus)
+ */
#define INT32K_EN_SHT 3
#define INT32K_EN BIT(INT32K_EN_SHT)
#define MACSLP_SHT 4
@@ -85,10 +87,12 @@
#define RING_CLK_EN BIT(RING_CLK_EN_SHT)
#define SWHW_SEL_SHT 14
#define SWHW_SEL BIT(SWHW_SEL_SHT) /* Load done,
- * control path switch.*/
+ * control path switch.
+ */
#define FWHW_SEL_SHT 15
#define FWHW_SEL BIT(FWHW_SEL_SHT) /* Sleep exit,
- * control path switch.*/
+ * control path switch.
+ */
/*9346CR*/
#define _VPDIDX_MSK 0xFF00
@@ -118,10 +122,12 @@
#define AFE_MISC_E32_EN BIT(AFE_MISC_E32_EN_SHT)
#define AFE_MISC_MBEN_SHT 1
#define AFE_MISC_MBEN BIT(AFE_MISC_MBEN_SHT)/* Enable AFE
Macro
- * Block's Mbias.*/
+ * Block's Mbias.
+ */
#define AFE_MISC_BGEN_SHT 0
#define AFE_MISC_BGEN BIT(AFE_MISC_BGEN_SHT)/* Enable AFE
Macro
- * Block's Bandgap.*/
+ * Block's Bandgap.
+ */
/*--------------------------------------------------------------------------*/
@@ -149,10 +155,12 @@
/* EFUSE_CTRL*/
#define EF_FLAG BIT(31) /* Access Flag, Write:1;
- * Read:0*/
+ * Read:0
+ */
#define EF_PGPD 0x70000000 /* E-fuse Program time*/
#define EF_RDT 0x0F000000 /* E-fuse read time: in the
- * unit of cycle time*/
+ * unit of cycle time
+ */
#define EF_PDN_EN BIT(19) /* EFuse Power down enable*/
#define ALD_EN BIT(18) /* Autoload Enable*/
#define EF_ADDR 0x0003FF00 /* Access Address*/
@@ -164,7 +172,8 @@
/* EFUSE_CLK_CTRL*/
#define EFUSE_CLK_EN BIT(1) /* E-Fuse Clock Enable*/
#define EFUSE_CLK_SEL BIT(0) /* E-Fuse Clock Select,
- * 0:500K, 1:40M*/
+ * 0:500K, 1:40M
+ */
#endif /*__RTL8712_SYSCFG_BITDEF_H__*/
diff --git a/drivers/staging/rtl8712/rtl8712_xmit.c
b/drivers/staging/rtl8712/rtl8712_xmit.c
index 7e0b945..4bbf76f 100644
--- a/drivers/staging/rtl8712/rtl8712_xmit.c
+++ b/drivers/staging/rtl8712/rtl8712_xmit.c
@@ -535,7 +535,8 @@ static void update_txdesc(struct xmit_frame *pxmitframe,
uint *pmem, int sz)
* seqnum per tid. about usb using 4-endpoint, qsel points out
* the correct mapping between AC&Endpoint,
* the purpose is that correct mapping lets the MAC release
- * the AC Queue list correctly. */
+ * the AC Queue list correctly.
+ */
ptxdesc->txdw3 = cpu_to_le32((pattrib->priority << SEQ_SHT) &
0x0fff0000);
if ((pattrib->ether_type != 0x888e) &&
@@ -586,7 +587,8 @@ static void update_txdesc(struct xmit_frame *pxmitframe,
uint *pmem, int sz)
* per tid. about usb using 4-endpoint, qsel points out the
* correct mapping between AC&Endpoint,
* the purpose is that correct mapping let the MAC releases
- * the AC Queue list correctly. */
+ * the AC Queue list correctly.
+ */
ptxdesc->txdw3 = cpu_to_le32((pattrib->priority << SEQ_SHT) &
0x0fff0000);
/* offset 16 */
@@ -686,7 +688,8 @@ int r8712_xmitframe_complete(struct _adapter *padapter,
res = r8712_xmitframe_coalesce(padapter,
pxmitframe->pkt, pxmitframe);
/* always return ndis_packet after
- * r8712_xmitframe_coalesce */
+ * r8712_xmitframe_coalesce
+ */
r8712_xmit_complete(padapter, pxmitframe);
}
if (res == _SUCCESS)
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h
b/drivers/staging/rtl8712/rtl871x_cmd.h
index ebd2e1d..a2cee36 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.h
+++ b/drivers/staging/rtl8712/rtl871x_cmd.h
@@ -185,10 +185,12 @@ struct setauth_parm {
*/
struct setkey_parm {
u8 algorithm; /* encryption algorithm, could be none, wep40,
- * TKIP, CCMP, wep104 */
+ * TKIP, CCMP, wep104
+ */
u8 keyid;
u8 grpkey; /* 1: this is the grpkey for 802.1x.
- * 0: this is the unicast key for 802.1x */
+ * 0: this is the unicast key for 802.1x
+ */
u8 key[16]; /* this could be 40 or 104 */
};
@@ -570,7 +572,8 @@ struct setpwrmode_parm {
u8 bcn_rx_en;
u8 bcn_pass_cnt; /* fw report one beacon information to
* driver when it receives bcn_pass_cnt
- * beacons. */
+ * beacons.
+ */
u8 bcn_to; /* beacon TO (ms). ¡§=0¡¨ no limit.*/
u16 bcn_itv;
u8 app_itv; /* only for VOIP mode. */
diff --git a/drivers/staging/rtl8712/rtl871x_ht.h
b/drivers/staging/rtl8712/rtl871x_ht.h
index 41872d9..513f458 100644
--- a/drivers/staging/rtl8712/rtl871x_ht.h
+++ b/drivers/staging/rtl8712/rtl871x_ht.h
@@ -36,7 +36,8 @@ struct ht_priv {
unsigned int tx_amsdu_enable;/*for enable Tx A-MSDU */
unsigned int tx_amdsu_maxlen; /* 1: 8k, 0:4k ; default:8k, for tx */
unsigned int rx_ampdu_maxlen; /* for rx reordering ctrl win_sz,
- * updated when join_callback. */
+ * updated when join_callback.
+ */
struct ieee80211_ht_cap ht_cap;
};
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl.h
b/drivers/staging/rtl8712/rtl871x_ioctl.h
index c9218be..08bcb3b 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl.h
+++ b/drivers/staging/rtl8712/rtl871x_ioctl.h
@@ -68,7 +68,8 @@ struct oid_par_priv {
struct oid_obj_priv {
unsigned char dbg; /* 0: without OID debug message
- * 1: with OID debug message */
+ * 1: with OID debug message
+ */
uint (*oidfuns)(struct oid_par_priv *poid_par_priv);
};
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_set.c
b/drivers/staging/rtl8712/rtl871x_ioctl_set.c
index 56760cd..0aaf2aa 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_set.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_set.c
@@ -140,7 +140,8 @@ u8 r8712_set_802_11_bssid(struct _adapter *padapter, u8
*bssid)
ETH_ALEN)) {
if (!check_fwstate(pmlmepriv, WIFI_STATION_STATE))
goto _Abort_Set_BSSID; /* driver is in
- * WIFI_ADHOC_MASTER_STATE */
+ * WIFI_ADHOC_MASTER_STATE
+ */
} else {
r8712_disassoc_cmd(padapter);
if (check_fwstate(pmlmepriv, _FW_LINKED))
@@ -203,7 +204,8 @@ void r8712_set_802_11_ssid(struct _adapter *padapter,
}
} else {
goto _Abort_Set_SSID; /* driver is in
- * WIFI_ADHOC_MASTER_STATE */
+ * WIFI_ADHOC_MASTER_STATE
+ */
}
}
} else {
@@ -254,12 +256,14 @@ void r8712_set_802_11_infrastructure_mode(struct _adapter
*padapter,
(*pold_state == Ndis802_11IBSS)) {
/* will clr Linked_state before this function,
* we must have checked whether issue dis-assoc_cmd or
- * not */
+ * not
+ */
r8712_ind_disconnect(padapter);
}
*pold_state = networktype;
/* clear WIFI_STATION_STATE; WIFI_AP_STATE; WIFI_ADHOC_STATE;
- * WIFI_ADHOC_MASTER_STATE */
+ * WIFI_ADHOC_MASTER_STATE
+ */
_clr_fwstate_(pmlmepriv, WIFI_STATION_STATE | WIFI_AP_STATE |
WIFI_ADHOC_STATE | WIFI_ADHOC_MASTER_STATE);
switch (networktype) {
diff --git a/drivers/staging/rtl8712/rtl871x_led.h
b/drivers/staging/rtl8712/rtl871x_led.h
index eb61205..adfbc40 100644
--- a/drivers/staging/rtl8712/rtl871x_led.h
+++ b/drivers/staging/rtl8712/rtl871x_led.h
@@ -72,14 +72,17 @@ enum LED_STRATEGY_871x {
SW_LED_MODE0, /* SW control 1 LED via GPIO0. It is default option. */
SW_LED_MODE1, /* 2 LEDs, through LED0 and LED1. For ALPHA. */
SW_LED_MODE2, /* SW control 1 LED via GPIO0,
- * custom for AzWave 8187 minicard. */
+ * custom for AzWave 8187 minicard.
+ */
SW_LED_MODE3, /* SW control 1 LED via GPIO0,
- * customized for Sercomm Printer Server case.*/
+ * customized for Sercomm Printer Server case.
+ */
SW_LED_MODE4, /*for Edimax / Belkin*/
SW_LED_MODE5, /*for Sercomm / Belkin*/
SW_LED_MODE6, /*for WNC / Corega*/
HW_LED, /* HW control 2 LEDs, LED0 and LED1 (there are 4 different
- * control modes, see MAC.CONFIG1 for details.)*/
+ * control modes, see MAC.CONFIG1 for details.)
+ */
};
struct LED_871x {
@@ -96,7 +99,8 @@ struct LED_871x {
u8 bLedWPSBlinkInProgress;
u32 BlinkTimes; /* No. times to toggle for blink.*/
u32 BlinkingLedState; /* Next state for blinking,
- * either LED_ON or OFF.*/
+ * either LED_ON or OFF.
+ */
struct timer_list BlinkTimer; /* Timer object for led blinking.*/
struct work_struct BlinkWorkItem; /* Workitem used by BlinkTimer */
@@ -115,7 +119,8 @@ struct led_priv {
/*===========================================================================
* Interface to manipulate LED objects.
- *===========================================================================*/
+ *===========================================================================
+ */
void r8712_InitSwLeds(struct _adapter *padapter);
void r8712_DeInitSwLeds(struct _adapter *padapter);
void LedControl871x(struct _adapter *padapter, enum LED_CTL_MODE LedAction);
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.c
b/drivers/staging/rtl8712/rtl871x_mlme.c
index 772bf9f..c1feef3 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.c
+++ b/drivers/staging/rtl8712/rtl871x_mlme.c
@@ -403,7 +403,8 @@ static void update_scanned_network(struct _adapter *adapter,
/* If we didn't find a match, then get a new network slot to initialize
- * with this beacon's information */
+ * with this beacon's information
+ */
if (end_of_queue_search(phead, plist)) {
if (list_empty(&pmlmepriv->free_bss_pool.queue)) {
/* If there are no more slots, expire the oldest */
@@ -926,7 +927,8 @@ void r8712_stassoc_event_callback(struct _adapter *adapter,
u8 *pbuf)
if (psta != NULL) {
/*the sta have been in sta_info_queue => do nothing
*(between drv has received this event before and
- * fw have not yet to set key to CAM_ENTRY) */
+ * fw have not yet to set key to CAM_ENTRY)
+ */
return;
}
@@ -1171,7 +1173,8 @@ int r8712_select_and_join_from_scan(struct mlme_priv
*pmlmepriv)
pmlmepriv->assoc_ssid.SsidLength))) {
if (pmlmepriv->assoc_by_rssi) {
/* if the ssid is the same, select the bss
- * which has the max rssi*/
+ * which has the max rssi
+ */
if (pnetwork_max_rssi) {
if (pnetwork->network.Rssi >
pnetwork_max_rssi->network.Rssi)
@@ -1352,7 +1355,8 @@ static int SecIsInPMKIDList(struct _adapter *Adapter, u8
*bssid)
i = -1; /* Could not find. */
} else {
; /* There is one Pre-Authentication Key for the
- * specific BSSID. */
+ * specific BSSID.
+ */
}
return i;
}
@@ -1430,7 +1434,8 @@ sint r8712_restruct_sec_ie(struct _adapter *adapter, u8
*in_ie,
if (match) {
if (sec_ie[0] == _WPA_IE_ID_) {
/* parsing SSN IE to select required encryption
- * algorithm, and set the bc/mc encryption algorithm */
+ * algorithm, and set the bc/mc encryption algorithm
+ */
while (true) {
/*check wpa_oui tag*/
if (memcmp(&sec_ie[2], &wpa_oui[0], 4)) {
@@ -1444,7 +1449,8 @@ sint r8712_restruct_sec_ie(struct _adapter *adapter, u8
*in_ie,
}
if (!memcmp(&sec_ie[8], &wpa_oui[0], 3)) {
/* get bc/mc encryption type (group
- * key type)*/
+ * key type)
+ */
switch (sec_ie[11]) {
case 0x0: /*none*/
psecuritypriv->XGrpPrivacy =
@@ -1482,7 +1488,8 @@ sint r8712_restruct_sec_ie(struct _adapter *adapter, u8
*in_ie,
} /*else the uncst_oui is match*/
} else { /*mixed mode, unicast_enc_type > 1*/
/*select the uncst_oui and remove
- * the other uncst_oui*/
+ * the other uncst_oui
+ */
cnt = sec_ie[12];
remove_cnt = (cnt - 1) * 4;
sec_ie[12] = 0x01;
@@ -1499,7 +1506,8 @@ sint r8712_restruct_sec_ie(struct _adapter *adapter, u8
*in_ie,
}
if (authmode == _WPA2_IE_ID_) {
/* parsing RSN IE to select required encryption
- * algorithm, and set the bc/mc encryption algorithm */
+ * algorithm, and set the bc/mc encryption algorithm
+ */
while (true) {
if ((sec_ie[2] != 0x01) || (sec_ie[3] != 0x0)) {
/*IE Ver error*/
@@ -1543,7 +1551,8 @@ sint r8712_restruct_sec_ie(struct _adapter *adapter, u8
*in_ie,
} /*else the uncst_oui is match*/
} else { /*mixed mode, unicast_enc_type > 1*/
/*select the uncst_oui and remove the
- * other uncst_oui*/
+ * other uncst_oui
+ */
cnt = sec_ie[8];
remove_cnt = (cnt - 1) * 4;
sec_ie[8] = 0x01;
@@ -1667,7 +1676,8 @@ void r8712_joinbss_reset(struct _adapter *padapter)
struct ht_priv *phtpriv = &pmlmepriv->htpriv;
/* todo: if you want to do something io/reg/hw setting before join_bss,
- * please add code here */
+ * please add code here
+ */
phtpriv->ampdu_enable = false;/*reset to disabled*/
for (i = 0; i < 16; i++)
phtpriv->baddbareq_issued[i] = false;/*reset it*/
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.h
b/drivers/staging/rtl8712/rtl871x_mlme.h
index 61e0eb7..ddaaab0 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.h
+++ b/drivers/staging/rtl8712/rtl871x_mlme.h
@@ -47,16 +47,20 @@
#define WIFI_ADHOC_MASTER_STATE 0x00000040
#define WIFI_UNDER_LINKING 0x00000080
#define WIFI_SITE_MONITOR 0x00000800 /* to indicate the station
- * is under site surveying*/
+ * is under site surveying
+ */
#define WIFI_MP_STATE 0x00010000
#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in cont. tx
background*/
#define WIFI_MP_CTX_ST 0x00040000 /* in cont. tx with
- * single-tone*/
+ * single-tone
+ */
#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in cont,
tx
- * background due to out of skb*/
+ * background due to out of
skb
+ */
#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continuous tx*/
#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in cont, tx with
carrier
- * suppression*/
+ * suppression
+ */
#define WIFI_MP_LPBK_STATE 0x00400000
#define _FW_UNDER_LINKING WIFI_UNDER_LINKING
diff --git a/drivers/staging/rtl8712/rtl871x_mp.c
b/drivers/staging/rtl8712/rtl871x_mp.c
index 5e4fda1..3c10a2c 100644
--- a/drivers/staging/rtl8712/rtl871x_mp.c
+++ b/drivers/staging/rtl8712/rtl871x_mp.c
@@ -376,7 +376,8 @@ void r8712_SwitchBandwidth(struct _adapter *pAdapter)
/* Use PHY_REG.txt default value. Do not need to change.
* Correct the tx power for CCK rate in 40M.
* Set Control channel to upper or lower. These settings are
- * required only for 40MHz */
+ * required only for 40MHz
+ */
set_bb_reg(pAdapter, rCCK0_System, bCCKSideBand,
(HAL_PRIME_CHNL_OFFSET_DONT_CARE >> 1));
set_bb_reg(pAdapter, rOFDM1_LSTF, 0xC00,
diff --git a/drivers/staging/rtl8712/rtl871x_mp.h
b/drivers/staging/rtl8712/rtl871x_mp.h
index 3f3b2e7..8df452e 100644
--- a/drivers/staging/rtl8712/rtl871x_mp.h
+++ b/drivers/staging/rtl8712/rtl871x_mp.h
@@ -108,7 +108,8 @@ struct mp_priv {
unsigned char network_macaddr[6];
/*Testing Flag*/
u32 mode;/*0 for normal type packet,
- * 1 for loopback packet (16bytes TXCMD)*/
+ * 1 for loopback packet (16bytes TXCMD)
+ */
sint prev_fw_state;
u8 *pallocated_mp_xmitframe_buf;
u8 *pmp_xmtframe_buf;
diff --git a/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
b/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
index 8dc8980..1102451 100644
--- a/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
+++ b/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
@@ -158,28 +158,37 @@ static const struct oid_obj_priv oid_rtl_seg_81_80_00[] =
{
{1, oid_null_function}, /*0x05 OID_RT_PRO_SET_SCRAMBLER*/
{1, oid_null_function}, /*0x06 OID_RT_PRO_SET_FILTER_BB*/
{1, oid_null_function}, /*0x07
- * OID_RT_PRO_SET_MANUAL_DIVERS_BB*/
+ * OID_RT_PRO_SET_MANUAL_DIVERS_BB
+ */
{1, oid_rt_pro_set_channel_direct_call_hdl}, /*0x08*/
{1, oid_null_function}, /*0x09
- * OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL*/
+ * OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL
+ */
{1, oid_null_function}, /*0x0A
- * OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL*/
+ * OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL
+ */
{1, oid_rt_pro_set_continuous_tx_hdl}, /*0x0B
- * OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL*/
+ * OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL
+ */
{1, oid_rt_pro_set_single_carrier_tx_hdl}, /*0x0C
- * OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS*/
+ * OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS
+ */
{1, oid_null_function}, /*0x0D
- * OID_RT_PRO_SET_TX_ANTENNA_BB*/
+ * OID_RT_PRO_SET_TX_ANTENNA_BB
+ */
{1, oid_rt_pro_set_antenna_bb_hdl}, /*0x0E*/
{1, oid_null_function}, /*0x0F OID_RT_PRO_SET_CR_SCRAMBLER*/
{1, oid_null_function}, /*0x10 OID_RT_PRO_SET_CR_NEW_FILTER*/
{1, oid_rt_pro_set_tx_power_control_hdl}, /*0x11
- * OID_RT_PRO_SET_TX_POWER_CONTROL*/
+ * OID_RT_PRO_SET_TX_POWER_CONTROL
+ */
{1, oid_null_function}, /*0x12 OID_RT_PRO_SET_CR_TX_CONFIG*/
{1, oid_null_function}, /*0x13
- * OID_RT_PRO_GET_TX_POWER_CONTROL*/
+ * OID_RT_PRO_GET_TX_POWER_CONTROL
+ */
{1, oid_null_function}, /*0x14
- * OID_RT_PRO_GET_CR_SIGNAL_QUALITY*/
+ * OID_RT_PRO_GET_CR_SIGNAL_QUALITY
+ */
{1, oid_null_function}, /*0x15 OID_RT_PRO_SET_CR_SETPOINT*/
{1, oid_null_function}, /*0x16 OID_RT_PRO_SET_INTEGRATOR*/
{1, oid_null_function}, /*0x17 OID_RT_PRO_SET_SIGNAL_QUALITY*/
@@ -203,13 +212,17 @@ static const struct oid_obj_priv oid_rtl_seg_81_80_20[] =
{
{1, oid_rt_pro_query_rx_packet_received_hdl}, /*0x26*/
{1, oid_rt_pro_query_rx_packet_crc32_error_hdl},/*0x27*/
{1, oid_null_function}, /*0x28
- *OID_RT_PRO_QUERY_CURRENT_ADDRESS*/
+ *OID_RT_PRO_QUERY_CURRENT_ADDRESS
+ */
{1, oid_null_function}, /*0x29
- *OID_RT_PRO_QUERY_PERMANENT_ADDRESS*/
+ *OID_RT_PRO_QUERY_PERMANENT_ADDRESS
+ */
{1, oid_null_function}, /*0x2A
- *OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS*/
+ *OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS
+ */
{1, oid_rt_pro_set_carrier_suppression_tx_hdl},/*0x2B
- *OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX*/
+ *OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX
+ */
{1, oid_null_function}, /*0x2C OID_RT_PRO_RECEIVE_PACKET*/
{1, oid_null_function}, /*0x2D OID_RT_PRO_WRITE_EEPROM_BYTE*/
{1, oid_null_function}, /*0x2E OID_RT_PRO_READ_EEPROM_BYTE*/
diff --git a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
index 2e9120a..11bcfb7 100644
--- a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
+++ b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
@@ -82,7 +82,8 @@
* 3. Page8(0x800)
*/
#define rFPGA0_RFMOD 0x800 /*RF mode & CCK TxSC RF
- * BW Setting?? */
+ * BW Setting??
+ */
#define rFPGA0_TxInfo 0x804 /* Status report?? */
#define rFPGA0_PSDFunction 0x808
#define rFPGA0_TxGainStage 0x80c /* Set TX PWR init
gain? */
@@ -119,7 +120,8 @@
#define rFPGA0_AnalogParameter1 0x880 /* Crystal cap setting
* RF-R/W protection
- * for parameter4?? */
+ * for parameter4??
+ */
#define rFPGA0_AnalogParameter2 0x884
#define rFPGA0_AnalogParameter3 0x888 /* Useless now */
#define rFPGA0_AnalogParameter4 0x88c
@@ -146,7 +148,8 @@
* 5. PageA(0xA00)
*
* Set Control channel to upper or lower.
- * These settings are required only for 40MHz */
+ * These settings are required only for 40MHz
+ */
#define rCCK0_System 0xa00
#define rCCK0_AFESetting 0xa04 /* Disable init gain
now */
@@ -155,20 +158,23 @@
#define rCCK0_RxAGC1 0xa0c
/* AGC default value, saturation level
* Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now.
- * Not the same as 90 series */
+ * Not the same as 90 series
+ */
#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
#define rCCK0_RxHP 0xa14
#define rCCK0_DSPParameter1 0xa18 /* Timing recovery &
Channel
- * estimation threshold */
+ * estimation threshold
+ */
#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
#define rCCK0_TxFilter1 0xa20
#define rCCK0_TxFilter2 0xa24
#define rCCK0_DebugPort 0xa28 /* debug port and Tx
filter3 */
#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now
0xa30-a4f
- * channel report */
+ * channel report
+ */
#define rCCK0_TRSSIReport 0xa50
#define rCCK0_RxReport 0xa54 /* 0xa57 */
#define rCCK0_FACounterLower 0xa5c /* 0xa5b */
@@ -193,11 +199,13 @@
#define rOFDM0_XDRxIQImbalance 0xc2c
#define rOFDM0_RxDetector1 0xc30 /* PD,BW & SBD DM tune
- * init gain */
+ * init gain
+ */
#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */
#define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */
#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync &
- * Short-GI */
+ * Short-GI
+ */
#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
@@ -283,7 +291,8 @@
#define rTxAGC_Mcs15_Mcs12 0xe1c
/* Analog- control in RX_WAIT_CCA : REG: EE0
- * [Analog- Power & Control Register] */
+ * [Analog- Power & Control Register]
+ */
#define rRx_Wait_CCCA 0xe70
#define rAnapar_Ctrl_BB 0xee0
@@ -371,7 +380,8 @@
/*
* Bit Mask
*
- * 1. Page1(0x100) */
+ * 1. Page1(0x100)
+ */
#define bBBResetB 0x100 /* Useless now? */
#define bGlobalResetB 0x200
#define bOFDMTxStart 0x4
@@ -918,7 +928,8 @@
#define bPesudoNoiseState_D 0xffff0000
/* 7. RF Register
- * Zebra1 */
+ * Zebra1
+ */
#define bZebra1_HSSIEnable 0x8 /* Useless */
#define bZebra1_TRxControl 0xc00
#define bZebra1_TRxGainSetting 0x07f
diff --git a/drivers/staging/rtl8712/rtl871x_pwrctrl.c
b/drivers/staging/rtl8712/rtl871x_pwrctrl.c
index 8d7ead6..8f82d85 100644
--- a/drivers/staging/rtl8712/rtl871x_pwrctrl.c
+++ b/drivers/staging/rtl8712/rtl871x_pwrctrl.c
@@ -52,7 +52,8 @@ void r8712_set_rpwm(struct _adapter *padapter, u8 val8)
pwrpriv->cpwm = val8;
break;
case PS_STATE_S2:/* only for USB normal powersave mode use,
- * temp mark some code. */
+ * temp mark some code.
+ */
case PS_STATE_S3:
case PS_STATE_S4:
pwrpriv->cpwm = val8;
diff --git a/drivers/staging/rtl8712/rtl871x_pwrctrl.h
b/drivers/staging/rtl8712/rtl871x_pwrctrl.h
index 231445e..c82fdf8 100644
--- a/drivers/staging/rtl8712/rtl871x_pwrctrl.h
+++ b/drivers/staging/rtl8712/rtl871x_pwrctrl.h
@@ -91,7 +91,8 @@ struct pwrctrl_priv {
struct mutex mutex_lock;
/*volatile*/ u8 rpwm; /* requested power state for fw */
/* fw current power state. updated when 1. read from HCPWM or
- * 2. driver lowers power level */
+ * 2. driver lowers power level
+ */
/*volatile*/ u8 cpwm;
/*volatile*/ u8 tog; /* toggling */
/*volatile*/ u8 cpwm_tog; /* toggling */
diff --git a/drivers/staging/rtl8712/rtl871x_recv.c
b/drivers/staging/rtl8712/rtl871x_recv.c
index 23c1438..cbd2e51 100644
--- a/drivers/staging/rtl8712/rtl871x_recv.c
+++ b/drivers/staging/rtl8712/rtl871x_recv.c
@@ -265,7 +265,8 @@ union recv_frame *r8712_portctrl(struct _adapter *adapter,
if ((psta != NULL) && (psta->ieee8021x_blocked)) {
/* blocked
- * only accept EAPOL frame */
+ * only accept EAPOL frame
+ */
if (ether_type == 0x888e) {
prtnframe = precv_frame;
} else {
@@ -277,7 +278,8 @@ union recv_frame *r8712_portctrl(struct _adapter *adapter,
} else {
/* allowed
* check decryption status, and decrypt the
- * frame if needed */
+ * frame if needed
+ */
prtnframe = precv_frame;
/* check is the EAPOL frame or not (Rekey) */
if (ether_type == 0x888e) {
@@ -334,19 +336,22 @@ static sint sta2sta_data_frame(struct _adapter *adapter,
sta_addr = pattrib->src;
} else if (check_fwstate(pmlmepriv, WIFI_STATION_STATE)) {
/* For Station mode, sa and bssid should always be BSSID,
- * and DA is my mac-address */
+ * and DA is my mac-address
+ */
if (memcmp(pattrib->bssid, pattrib->src, ETH_ALEN))
return _FAIL;
sta_addr = pattrib->bssid;
} else if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
if (bmcast) {
/* For AP mode, if DA == MCAST, then BSSID should
- * be also MCAST */
+ * be also MCAST
+ */
if (!IS_MCAST(pattrib->bssid))
return _FAIL;
} else { /* not mc-frame */
/* For AP mode, if DA is non-MCAST, then it must be
- * BSSID, and bssid == BSSID */
+ * BSSID, and bssid == BSSID
+ */
if (memcmp(pattrib->bssid, pattrib->dst, ETH_ALEN))
return _FAIL;
sta_addr = pattrib->src;
@@ -391,7 +396,8 @@ static sint ap2sta_data_frame(struct _adapter *adapter,
if ((GetFrameSubType(ptr)) == WIFI_DATA_NULL)
return _FAIL;
/* drop QoS-SubType Data, including QoS NULL,
- * excluding QoS-Data */
+ * excluding QoS-Data
+ */
if ((GetFrameSubType(ptr) & WIFI_QOS_DATA_TYPE) ==
WIFI_QOS_DATA_TYPE) {
if (GetFrameSubType(ptr) & (BIT(4) | BIT(5) | BIT(6)))
@@ -445,7 +451,8 @@ static sint sta2ap_data_frame(struct _adapter *adapter,
if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
/* For AP mode, if DA is non-MCAST, then it must be BSSID,
* and bssid == BSSID
- * For AP mode, RA=BSSID, TX=STA(SRC_ADDR), A3=DST_ADDR */
+ * For AP mode, RA=BSSID, TX=STA(SRC_ADDR), A3=DST_ADDR
+ */
if (memcmp(pattrib->bssid, mybssid, ETH_ALEN))
return _FAIL;
*psta = r8712_get_stainfo(pstapriv, pattrib->src);
@@ -619,7 +626,8 @@ sint r8712_wlanhdr_to_ethhdr(union recv_frame *precvframe)
(memcmp(psnap_type, (void *)SNAP_ETH_TYPE_APPLETALK_AARP, 2))) ||
!memcmp(psnap, (void *)bridge_tunnel_header, SNAP_SIZE)) {
/* remove RFC1042 or Bridge-Tunnel encapsulation and
- * replace EtherType */
+ * replace EtherType
+ */
bsnaphdr = true;
} else {
/* Leave Ethernet header part of hdr and full payload */
diff --git a/drivers/staging/rtl8712/rtl871x_recv.h
b/drivers/staging/rtl8712/rtl871x_recv.h
index 77487bb..f419943 100644
--- a/drivers/staging/rtl8712/rtl871x_recv.h
+++ b/drivers/staging/rtl8712/rtl871x_recv.h
@@ -153,7 +153,8 @@ static inline u8 *get_recvframe_data(union recv_frame
*precvframe)
static inline u8 *recvframe_pull(union recv_frame *precvframe, sint sz)
{
/* used for extract sz bytes from rx_data, update rx_data and return
- * the updated rx_data to the caller */
+ * the updated rx_data to the caller
+ */
if (precvframe == NULL)
return NULL;
precvframe->u.hdr.rx_data += sz;
@@ -169,7 +170,8 @@ static inline u8 *recvframe_put(union recv_frame
*precvframe, sint sz)
{
/* used for append sz bytes from ptr to rx_tail, update rx_tail and
* return the updated rx_tail to the caller
- * after putting, rx_tail must be still larger than rx_end. */
+ * after putting, rx_tail must be still larger than rx_end.
+ */
if (precvframe == NULL)
return NULL;
precvframe->u.hdr.rx_tail += sz;
@@ -186,7 +188,8 @@ static inline u8 *recvframe_pull_tail(union recv_frame
*precvframe, sint sz)
/* rmv data from rx_tail (by yitsen)
* used for extract sz bytes from rx_end, update rx_end and return the
* updated rx_end to the caller
- * after pulling, rx_end must be still larger than rx_data. */
+ * after pulling, rx_end must be still larger than rx_data.
+ */
if (precvframe == NULL)
return NULL;
precvframe->u.hdr.rx_tail -= sz;
diff --git a/drivers/staging/rtl8712/rtl871x_security.h
b/drivers/staging/rtl8712/rtl871x_security.h
index 2295f0e..fa952e1 100644
--- a/drivers/staging/rtl8712/rtl871x_security.h
+++ b/drivers/staging/rtl8712/rtl871x_security.h
@@ -90,18 +90,23 @@ struct RT_PMKID_LIST {
struct security_priv {
u32 AuthAlgrthm; /* 802.11 auth, could be open, shared,
- * 8021x and authswitch */
+ * 8021x and authswitch
+ */
u32 PrivacyAlgrthm; /* This specify the privacy for shared
- * auth. algorithm. */
+ * auth. algorithm.
+ */
u32 PrivacyKeyIndex; /* this is only valid for legendary
- * wep, 0~3 for key id. */
+ * wep, 0~3 for key id.
+ */
union Keytype DefKey[4]; /* this is only valid for def. key */
u32 DefKeylen[4];
u32 XGrpPrivacy; /* This specify the privacy algthm.
- * used for Grp key */
+ * used for Grp key
+ */
u32 XGrpKeyid; /* key id used for Grp Key */
union Keytype XGrpKey[2]; /* 802.1x Group Key, for
- * inx0 and inx1 */
+ * inx0 and inx1
+ */
union Keytype XGrptxmickey[2];
union Keytype XGrprxmickey[2];
union pn48 Grptxpn; /* PN48 used for Grp Key xmit. */
@@ -118,9 +123,11 @@ struct security_priv {
s32 sw_encrypt; /* from registry_priv */
s32 sw_decrypt; /* from registry_priv */
s32 hw_decrypted; /* if the rx packets is hw_decrypted==false,
- * it means the hw has not been ready. */
+ * it means the hw has not been ready.
+ */
u32 ndisauthtype; /* keeps the auth_type & enc_status from upper
- * layer ioctl(wpa_supplicant or wzc) */
+ * layer ioctl(wpa_supplicant or wzc)
+ */
u32 ndisencryptstatus;
struct wlan_bssid_ex sec_bss; /* for joinbss (h2c buffer) usage */
struct NDIS_802_11_WEP ndiswep;
@@ -136,7 +143,8 @@ struct security_priv {
u32 btkip_countermeasure_time;
/*-------------------------------------------------------------------
* For WPA2 Pre-Authentication.
- *------------------------------------------------------------------ */
+ *------------------------------------------------------------------
+ **/
struct RT_PMKID_LIST PMKIDList[NUM_PMKID_CACHE];
u8 PMKIDIndex;
};
diff --git a/drivers/staging/rtl8712/rtl871x_sta_mgt.c
b/drivers/staging/rtl8712/rtl871x_sta_mgt.c
index e11ce28..e2d75e4 100644
--- a/drivers/staging/rtl8712/rtl871x_sta_mgt.c
+++ b/drivers/staging/rtl8712/rtl871x_sta_mgt.c
@@ -188,7 +188,8 @@ void r8712_free_stainfo(struct _adapter *padapter, struct
sta_info *psta)
_r8712_init_sta_xmit_priv(&psta->sta_xmitpriv);
_r8712_init_sta_recv_priv(&psta->sta_recvpriv);
/* for A-MPDU Rx reordering buffer control,
- * cancel reordering_ctrl_timer */
+ * cancel reordering_ctrl_timer
+ */
for (i = 0; i < 16; i++) {
preorder_ctrl = &psta->recvreorder_ctrl[i];
del_timer(&preorder_ctrl->reordering_ctrl_timer);
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.c
b/drivers/staging/rtl8712/rtl871x_xmit.c
index 99256ba..be38364 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.c
+++ b/drivers/staging/rtl8712/rtl871x_xmit.c
@@ -204,7 +204,8 @@ sint r8712_update_attrib(struct _adapter *padapter, _pkt
*pkt,
{
/*If driver xmit ARP packet, driver can set ps mode to initial
- * setting. It stands for getting DHCP or fix IP.*/
+ * setting. It stands for getting DHCP or fix IP.
+ */
if (pattrib->ether_type == 0x0806) {
if (padapter->pwrctrlpriv.pwr_mode !=
padapter->registrypriv.power_mgnt) {
@@ -232,7 +233,8 @@ sint r8712_update_attrib(struct _adapter *padapter, _pkt
*pkt,
if (pattrib->ether_type != 0x8712)
return _FAIL;
/* for mp storing the txcmd per packet,
- * according to the info of txcmd to update pattrib */
+ * according to the info of txcmd to update pattrib
+ */
/*get MP_TXDESC_SIZE bytes txcmd per packet*/
_r8712_pktfile_read(&pktfile, (u8 *)&txdesc, TXDESC_SIZE);
memcpy(pattrib->ra, pattrib->dst, ETH_ALEN);
@@ -244,7 +246,8 @@ sint r8712_update_attrib(struct _adapter *padapter, _pkt
*pkt,
if (pattrib->ether_type == ETH_P_IP) {
/* The following is for DHCP and ARP packet, we use cck1M to
* tx these packets and let LPS awake some time
- * to prevent DHCP protocol fail */
+ * to prevent DHCP protocol fail
+ */
u8 tmp[24];
_r8712_pktfile_read(&pktfile, &tmp[0], 24);
@@ -255,7 +258,8 @@ sint r8712_update_attrib(struct _adapter *padapter, _pkt
*pkt,
((tmp[21] == 67) && (tmp[23] == 68))) {
/* 68 : UDP BOOTP client
* 67 : UDP BOOTP server
- * Use low rate to send DHCP packet.*/
+ * Use low rate to send DHCP packet.
+ */
pattrib->dhcp_pkt = 1;
}
}
@@ -337,7 +341,8 @@ sint r8712_update_attrib(struct _adapter *padapter, _pkt
*pkt,
else
pattrib->bswenc = false;
/* if in MP_STATE, update pkt_attrib from mp_txcmd, and overwrite
- * some settings above.*/
+ * some settings above.
+ */
if (check_fwstate(pmlmepriv, WIFI_MP_STATE))
pattrib->priority = (txdesc.txdw1 >> QSEL_SHT) & 0x1f;
return _SUCCESS;
@@ -438,7 +443,8 @@ static sint xmitframe_addmic(struct _adapter *padapter,
}
r8712_secgetmic(&micdata, &(mic[0]));
/* add mic code and add the mic code length in
- * last_txcmdsz */
+ * last_txcmdsz
+ */
memcpy(payload, &(mic[0]), 8);
pattrib->last_txcmdsz += 8;
payload = payload - pattrib->last_txcmdsz + 8;
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.h
b/drivers/staging/rtl8712/rtl871x_xmit.h
index a9633c3..d899d0c 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.h
+++ b/drivers/staging/rtl8712/rtl871x_xmit.h
@@ -58,7 +58,8 @@ do { \
} while (0)
/* Fixed the Big Endian bug when doing the Tx.
- * The Linksys WRH54G will check this.*/
+ * The Linksys WRH54G will check this.
+ */
#define TKIP_IV(pattrib_iv, txpn, keyidx)\
do { \
pattrib_iv[0] = txpn._byte_.TSC1;\
@@ -105,7 +106,8 @@ struct pkt_attrib {
u16 seqnum;
u16 ether_type;
u16 pktlen; /* the original 802.3 pkt raw_data len
- * (not include ether_hdr data) */
+ * (not include ether_hdr data)
+ */
u16 last_txcmdsz;
u8 pkt_hdrlen; /*the original 802.3 pkt header len*/
@@ -119,7 +121,8 @@ struct pkt_attrib {
u8 priority;
u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
- * indicate the encrypt algorithm*/
+ * indicate the encrypt algorithm
+ */
u8 iv_len;
u8 icv_len;
unsigned char iv[8];
@@ -176,7 +179,8 @@ struct sta_xmit_priv {
spinlock_t lock;
sint option;
sint apsd_setting; /* When bit mask is on, the associated edca
- * queue supports APSD.*/
+ * queue supports APSD.
+ */
struct tx_servq be_q; /* priority == 0,3 */
struct tx_servq bk_q; /* priority == 1,2*/
struct tx_servq vi_q; /*priority == 4,5*/
diff --git a/drivers/staging/rtl8712/usb_halinit.c
b/drivers/staging/rtl8712/usb_halinit.c
index ad21df1..0b15985 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -196,7 +196,8 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
msleep(20);
/* Revised POS, */
/* Enable AFE Macro Block's Bandgap and Enable AFE Macro
- * Block's Mbias */
+ * Block's Mbias
+ */
r8712_write8(padapter, SPS0_CTRL + 1, 0x53);
r8712_write8(padapter, SPS0_CTRL, 0x57);
val8 = r8712_read8(padapter, AFE_MISC);
diff --git a/drivers/staging/rtl8712/usb_intf.c
b/drivers/staging/rtl8712/usb_intf.c
index c1a0ca49..3fc65b2 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -301,7 +301,8 @@ void rtl871x_intf_stop(struct _adapter *padapter)
/*disable_hw_interrupt*/
if (!padapter->bSurpriseRemoved) {
/*device still exists, so driver can do i/o operation
- * TODO: */
+ * TODO:
+ */
}
/* cancel in irp */
@@ -611,7 +612,8 @@ error:
}
/* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove()
- * => how to recognize both */
+ * => how to recognize both
+ */
static void r871xu_dev_remove(struct usb_interface *pusb_intf)
{
struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
@@ -635,12 +637,14 @@ static void r871xu_dev_remove(struct usb_interface
*pusb_intf)
r8712_free_drv_sw(padapter);
/* decrease the reference count of the usb device structure
- * when disconnect */
+ * when disconnect
+ */
usb_put_dev(udev);
}
/* If we didn't unplug usb dongle and remove/insert module, driver
* fails on sitesurvey for the first time when device is up.
- * Reset usb port for sitesurvey fail issue. */
+ * Reset usb port for sitesurvey fail issue.
+ */
if (udev->state != USB_STATE_NOTATTACHED)
usb_reset_device(udev);
}
diff --git a/drivers/staging/rtl8712/wifi.h b/drivers/staging/rtl8712/wifi.h
index 7a352c4..b8af965 100644
--- a/drivers/staging/rtl8712/wifi.h
+++ b/drivers/staging/rtl8712/wifi.h
@@ -376,7 +376,8 @@ static inline unsigned char *get_hdr_bssid(unsigned char
*pframe)
/*-----------------------------------------------------------------------------
Below is for the security related definition
-------------------------------------------------------------------------------*/
+ *-----------------------------------------------------------------------------
+ */
#define _RESERVED_FRAME_TYPE_ 0
#define _SKB_FRAME_TYPE_ 2
#define _PRE_ALLOCMEM_ 1
@@ -420,7 +421,8 @@ static inline unsigned char *get_hdr_bssid(unsigned char
*pframe)
/* ---------------------------------------------------------------------------
Below is the fixed elements...
------------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
#define _AUTH_ALGM_NUM_ 2
#define _AUTH_SEQ_NUM_ 2
#define _BEACON_ITERVAL_ 2
@@ -448,20 +450,23 @@ static inline unsigned char *get_hdr_bssid(unsigned char
*pframe)
/*-----------------------------------------------------------------------------
Below is the definition for 802.11i / 802.1x
-------------------------------------------------------------------------------*/
+
*------------------------------------------------------------------------------
+ */
#define _IEEE8021X_MGT_ 1 /*WPA */
#define _IEEE8021X_PSK_ 2 /* WPA with pre-shared
key */
/*-----------------------------------------------------------------------------
Below is the definition for WMM
-------------------------------------------------------------------------------*/
+
*------------------------------------------------------------------------------
+ */
#define _WMM_IE_Length_ 7 /* for WMM STA */
#define _WMM_Para_Element_Length_ 24
/*-----------------------------------------------------------------------------
Below is the definition for 802.11n
-------------------------------------------------------------------------------*/
+
*------------------------------------------------------------------------------
+ */
/* block-ack parameters */
#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
diff --git a/drivers/staging/rtl8712/wlan_bssdef.h
b/drivers/staging/rtl8712/wlan_bssdef.h
index fda5707..86a88b4 100644
--- a/drivers/staging/rtl8712/wlan_bssdef.h
+++ b/drivers/staging/rtl8712/wlan_bssdef.h
@@ -171,7 +171,8 @@ struct NDIS_802_11_REMOVE_KEY {
struct NDIS_802_11_WEP {
u32 Length; /* Length of this structure */
u32 KeyIndex; /* 0 is the per-client key,
- * 1-N are the global keys */
+ * 1-N are the global keys
+ */
u32 KeyLength; /* length of key in bytes */
u8 KeyMaterial[16]; /* variable length depending on above field */
};
@@ -194,7 +195,8 @@ struct wlan_network {
struct list_head list;
int network_type; /*refer to ieee80211.h for WIRELESS_11A/B/G */
int fixed; /* set to fixed when not to be removed asi
- * site-surveying */
+ * site-surveying
+ */
unsigned int last_scanned; /*timestamp for the network */
int aid; /*will only be valid when a BSS is joined. */
int join_res;
--
2.9.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
