On 12/11/16 18:19, Brian Masney wrote:
> The driver contains a global lux table that can be updated via sysfs.
> Change this to a per device lux table so that multiple devices can be
> hooked up to the same system with different lux tables.
>
> There are 10 entries, plus 1 for the termination segment, set aside for
> the entries in the lux table. When updating the lux table via sysfs,
> only 9 entries, plus the terminator, could be added. This changes
> the code to allow for the 10 entries, plus the terminator.
>
> Signed-off-by: Brian Masney <masn...@onstation.org>
Applied.
> ---
> drivers/staging/iio/light/tsl2583.c | 80
> +++++++++++++++++++++----------------
> 1 file changed, 46 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2583.c
> b/drivers/staging/iio/light/tsl2583.c
> index 78967dc..3818ffa 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -70,11 +70,34 @@ struct tsl2583_als_info {
> u16 lux;
> };
>
> +struct tsl2583_lux {
> + unsigned int ratio;
> + unsigned int ch0;
> + unsigned int ch1;
> +};
> +
> +static const struct tsl2583_lux tsl2583_default_lux[] = {
> + { 9830, 8520, 15729 },
> + { 12452, 10807, 23344 },
> + { 14746, 6383, 11705 },
> + { 17695, 4063, 6554 },
> + { 0, 0, 0 } /* Termination segment */
> +};
> +
> +#define TSL2583_MAX_LUX_TABLE_ENTRIES 11
> +
> struct tsl2583_settings {
> int als_time;
> int als_gain;
> int als_gain_trim;
> int als_cal_target;
> +
> + /*
> + * This structure is intentionally large to accommodate updates via
> + * sysfs. Sized to 11 = max 10 segments + 1 termination segment.
> + * Assumption is that one and only one type of glass used.
> + */
> + struct tsl2583_lux als_device_lux[TSL2583_MAX_LUX_TABLE_ENTRIES];
> };
>
> struct tsl2583_chip {
> @@ -87,24 +110,6 @@ struct tsl2583_chip {
> bool suspended;
> };
>
> -struct tsl2583_lux {
> - unsigned int ratio;
> - unsigned int ch0;
> - unsigned int ch1;
> -};
> -
> -/*
> - * This structure is intentionally large to accommodate updates via sysfs.
> - * Sized to 11 = max 10 segments + 1 termination segment. Assumption is that
> - * one and only one type of glass used.
> - */
> -static struct tsl2583_lux tsl2583_device_lux[11] = {
> - { 9830, 8520, 15729 },
> - { 12452, 10807, 23344 },
> - { 14746, 6383, 11705 },
> - { 17695, 4063, 6554 },
> -};
> -
> struct gainadj {
> s16 ch0;
> s16 ch1;
> @@ -142,6 +147,10 @@ static void tsl2583_defaults(struct tsl2583_chip *chip)
>
> /* Known external ALS reading used for calibration */
> chip->als_settings.als_cal_target = 130;
> +
> + /* Default lux table. */
> + memcpy(chip->als_settings.als_device_lux, tsl2583_default_lux,
> + sizeof(tsl2583_default_lux));
> }
>
> /*
> @@ -151,7 +160,7 @@ static void tsl2583_defaults(struct tsl2583_chip *chip)
> * Time scale factor array values are adjusted based on the integration time.
> * The raw values are multiplied by a scale factor, and device gain is
> obtained
> * using gain index. Limit checks are done next, then the ratio of a multiple
> - * of ch1 value, to the ch0 value, is calculated. The array
> tsl2583_device_lux[]
> + * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[]
> * declared above is then scanned to find the first ratio value that is just
> * above the ratio we just calculated. The ch0 and ch1 multiplier constants
> in
> * the array are then used along with the time scale factor array values, to
> @@ -233,7 +242,7 @@ static int tsl2583_get_lux(struct iio_dev *indio_dev)
> ratio = (ch1 << 15) / ch0;
>
> /* convert to unscaled lux using the pointer to the table */
> - for (p = (struct tsl2583_lux *)tsl2583_device_lux;
> + for (p = (struct tsl2583_lux *)chip->als_settings.als_device_lux;
> p->ratio != 0 && p->ratio < ratio; p++)
> ;
>
> @@ -270,7 +279,7 @@ static int tsl2583_get_lux(struct iio_dev *indio_dev)
>
> /*
> * Adjust for active gain scale.
> - * The tsl2583_device_lux tables above have a factor of 8192 built in,
> + * The tsl2583_default_lux tables above have a factor of 8192 built in,
> * so we need to shift right.
> * User-specified gain provides a multiplier.
> * Apply user-specified gain before shifting right to retain precision.
> @@ -522,15 +531,17 @@ static ssize_t in_illuminance_lux_table_show(struct
> device *dev,
> struct device_attribute *attr,
> char *buf)
> {
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct tsl2583_chip *chip = iio_priv(indio_dev);
> unsigned int i;
> int offset = 0;
>
> - for (i = 0; i < ARRAY_SIZE(tsl2583_device_lux); i++) {
> + for (i = 0; i < ARRAY_SIZE(chip->als_settings.als_device_lux); i++) {
> offset += sprintf(buf + offset, "%u,%u,%u,",
> - tsl2583_device_lux[i].ratio,
> - tsl2583_device_lux[i].ch0,
> - tsl2583_device_lux[i].ch1);
> - if (tsl2583_device_lux[i].ratio == 0) {
> + chip->als_settings.als_device_lux[i].ratio,
> + chip->als_settings.als_device_lux[i].ch0,
> + chip->als_settings.als_device_lux[i].ch1);
> + if (chip->als_settings.als_device_lux[i].ratio == 0) {
> /*
> * We just printed the first "0" entry.
> * Now get rid of the extra "," and break.
> @@ -545,15 +556,14 @@ static ssize_t in_illuminance_lux_table_show(struct
> device *dev,
> return offset;
> }
>
> -#define TSL2583_MAX_LUX_INTS ((ARRAY_SIZE(tsl2583_device_lux) - 1) * 3)
> -
> static ssize_t in_illuminance_lux_table_store(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t len)
> {
> struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> struct tsl2583_chip *chip = iio_priv(indio_dev);
> - int value[ARRAY_SIZE(tsl2583_device_lux) * 3 + 1];
> + const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
> + int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
> int ret = -EINVAL;
> unsigned int n;
>
> @@ -568,10 +578,10 @@ static ssize_t in_illuminance_lux_table_store(struct
> device *dev,
> * and the last table entry is all 0.
> */
> n = value[0];
> - if ((n % 3) || n < 6 || n > TSL2583_MAX_LUX_INTS) {
> + if ((n % 3) || n < 6 || n > max_ints) {
> dev_err(dev,
> - "%s: The number of entries in the lux table must be a
> multiple of 3 and within the range [6, %zu]\n",
> - __func__, TSL2583_MAX_LUX_INTS);
> + "%s: The number of entries in the lux table must be a
> multiple of 3 and within the range [6, %d]\n",
> + __func__, max_ints);
> goto done;
> }
> if ((value[n - 2] | value[n - 1] | value[n]) != 0) {
> @@ -581,8 +591,10 @@ static ssize_t in_illuminance_lux_table_store(struct
> device *dev,
> }
>
> /* Zero out the table */
> - memset(tsl2583_device_lux, 0, sizeof(tsl2583_device_lux));
> - memcpy(tsl2583_device_lux, &value[1], value[0] * sizeof(value[1]));
> + memset(chip->als_settings.als_device_lux, 0,
> + sizeof(chip->als_settings.als_device_lux));
> + memcpy(chip->als_settings.als_device_lux, &value[1],
> + value[0] * sizeof(value[1]));
>
> ret = len;
>
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
