This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <larry.fin...@lwfinger.net>
Cc: Ping-Ke Shih <pks...@realtek.com>
---
.../net/wireless/realtek/rtlwifi/rtl8188ee/fw.c | 33 ++++++----------------
.../net/wireless/realtek/rtlwifi/rtl8188ee/hw.c | 30 ++++++++------------
.../net/wireless/realtek/rtlwifi/rtl8188ee/phy.c | 22 ++++++---------
.../net/wireless/realtek/rtlwifi/rtl8188ee/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/sw.c | 8 ++----
5 files changed, 33 insertions(+), 63 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
index fbd3eea..3ba2a3f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
@@ -125,10 +125,8 @@ static void _rtl88e_write_fw(struct ieee80211_hw *hw,
pagenums = size / FW_8192C_PAGE_SIZE;
remainsize = size % FW_8192C_PAGE_SIZE;
- if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
- }
+ if (pagenums > 8)
+ pr_err("Page numbers should not greater then 8\n");
for (page = 0; page < pagenums; page++) {
offset = page * FW_8192C_PAGE_SIZE;
@@ -157,15 +155,10 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
(!(value32 & FWDL_CHKSUM_RPT)));
if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n",
+ value32);
goto exit;
}
-
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
value32 &= ~WINTINI_RDY;
@@ -176,20 +169,14 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
do {
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
- if (value32 & WINTINI_RDY) {
- RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
- "Polling FW ready success!!
REG_MCUFWDL:0x%08x.\n",
- value32);
- err = 0;
- goto exit;
- }
+ if (value32 & WINTINI_RDY)
+ return 0;
udelay(FW_8192C_POLLING_DELAY);
} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+ pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
exit:
return err;
@@ -235,8 +222,7 @@ int rtl88e_download_fw(struct ieee80211_hw *hw,
err = _rtl88e_fw_free_to_go(hw);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is not ready to run!\n");
+ pr_err("Firmware is not ready to run!\n");
} else {
RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
"Firmware is ready to run!\n");
@@ -309,8 +295,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw
*hw,
while (!write_sucess) {
wait_writeh2c_limit--;
if (wait_writeh2c_limit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW
INT!\n");
+ pr_err("Write H2C fail because no trigger for FW
INT!\n");
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
index 1a17dfe..0dc1293 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
@@ -358,8 +358,7 @@ void rtl88ee_get_hw_reg(struct ieee80211_hw *hw, u8
variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -572,9 +571,8 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8
variable, u8 *val)
acm_ctrl &= (~ACMHW_VOQEN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- e_aci);
+ pr_err("switch case %#x not processed\n",
+ e_aci);
break;
}
}
@@ -737,8 +735,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8
variable, u8 *val)
2, array);
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -759,9 +756,8 @@ static bool _rtl88ee_llt_write(struct ieee80211_hw *hw, u32
address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address
%d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address
%d!\n",
+ address);
status = false;
break;
}
@@ -1096,7 +1092,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
rtstatus = _rtl88ee_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_info("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1252,8 +1248,7 @@ static int _rtl88ee_set_media_status(struct ieee80211_hw
*hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
break;
}
@@ -1987,7 +1982,7 @@ void rtl88ee_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl88ee_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl88ee_hal_customized_behavior(hw);
}
@@ -2354,8 +2349,7 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32
key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("switch case %#x not processed\n", enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2373,9 +2367,7 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32
key_index,
entry_id =
rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw
security cam entry\n");
+ pr_err("Can not find free hw
security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
index ece8691..c6d6a16 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
@@ -176,7 +176,7 @@ static u32 _rtl88e_phy_rf_serial_read(struct ieee80211_hw
*hw,
offset &= 0xff;
newoffset = offset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("return all one\n");
return 0xFFFFFFFF;
}
tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -220,7 +220,7 @@ static void _rtl88e_phy_rf_serial_write(struct ieee80211_hw
*hw,
struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("stop\n");
return;
}
offset &= 0xff;
@@ -373,7 +373,7 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct
ieee80211_hw *hw)
rtstatus = phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_PHY_REG);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
@@ -383,13 +383,13 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct
ieee80211_hw *hw)
phy_config_bb_with_pghdr(hw, BASEBAND_CONFIG_PHY_REG);
}
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus =
phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power =
@@ -1095,8 +1095,7 @@ void rtl88e_phy_scan_operation_backup(struct ieee80211_hw
*hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -1137,8 +1136,7 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw
*hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -1162,8 +1160,7 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw
*hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl88e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1303,8 +1300,7 @@ static bool _rtl88e_phy_sw_chnl_step_by_step(struct
ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n", *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
index 26ac4c2..30798b1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
@@ -51,8 +51,7 @@ void rtl88e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
index f361808..276c745 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
@@ -165,8 +165,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_info("Can't alloc buffer for fw.\n");
return 1;
}
@@ -177,8 +176,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_info("Failed to request firmware!\n");
return 1;
}
@@ -278,7 +276,7 @@ static struct rtl_mod_params rtl88ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = false,
.msi_support = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl88ee_hal_cfg = {
--
2.10.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
