This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <larry.fin...@lwfinger.net>
Cc: Ping-Ke Shih <pks...@realtek.com>
---
V2 - eliminate some files that should not have been sent, and remove the
module name from the format. It is already specified by a pr_fmt().
---
.../net/wireless/realtek/rtlwifi/rtl8192ce/hw.c | 36 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8192ce/led.c | 6 ++--
.../net/wireless/realtek/rtlwifi/rtl8192ce/phy.c | 13 +++-----
.../net/wireless/realtek/rtlwifi/rtl8192ce/rf.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8192ce/sw.c | 8 ++---
5 files changed, 24 insertions(+), 42 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
index ce07e5c..410d48bf 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
@@ -140,8 +140,7 @@ void rtl92ce_get_hw_reg(struct ieee80211_hw *hw, u8
variable, u8 *val)
case HAL_DEF_WOWLAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", variable);
+ pr_err("switch case %#x not processed\n", variable);
break;
}
}
@@ -364,9 +363,8 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8
variable, u8 *val)
acm_ctrl &= (~AcmHw_VoqEn);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not
processed\n",
- e_aci);
+ pr_err("switch case %#x not
processed\n",
+ e_aci);
break;
}
}
@@ -551,8 +549,7 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8
variable, u8 *val)
rtl92c_fill_h2c_cmd(hw, H2C_92C_KEEP_ALIVE_CTRL, 2, array);
break; }
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %d not processed\n", variable);
+ pr_err("switch case %d not processed\n", variable);
break;
}
}
@@ -573,9 +570,8 @@ static bool _rtl92ce_llt_write(struct ieee80211_hw *hw, u32
address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address
%d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address
%d!\n",
+ address);
status = false;
break;
}
@@ -963,7 +959,7 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw)
rtlpriv->intf_ops->disable_aspm(hw);
rtstatus = _rtl92ce_init_mac(hw);
if (!rtstatus) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1128,8 +1124,7 @@ static enum version_8192c
_rtl92ce_read_chip_version(struct ieee80211_hw *hw)
break;
}
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
- "Chip Version ID: %s\n", versionid);
+ pr_info("Chip Version ID: %s\n", versionid);
switch (version & 0x3) {
case CHIP_88C:
@@ -1143,8 +1138,7 @@ static enum version_8192c
_rtl92ce_read_chip_version(struct ieee80211_hw *hw)
break;
default:
rtlphy->rf_type = RF_1T1R;
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "ERROR RF_Type is set!!\n");
+ pr_err("ERROR RF_Type is set!!\n");
break;
}
@@ -1193,8 +1187,7 @@ static int _rtl92ce_set_media_status(struct ieee80211_hw
*hw,
"Set Network type to Mesh Point!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not supported!\n", type);
+ pr_err("Network type %d not supported!\n", type);
return 1;
}
@@ -1780,7 +1773,7 @@ void rtl92ce_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl92ce_read_adapter_info(hw);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl92ce_hal_customized_behavior(hw);
}
@@ -2152,8 +2145,8 @@ void rtl92ce_set_key(struct ieee80211_hw *hw, u32
key_index,
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", enc_algo);
+ pr_err("switch case %#x not processed\n",
+ enc_algo);
enc_algo = CAM_TKIP;
break;
}
@@ -2171,9 +2163,7 @@ void rtl92ce_set_key(struct ieee80211_hw *hw, u32
key_index,
entry_id = rtl_cam_get_free_entry(hw,
p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw
security cam entry\n");
+ pr_err("Can not find free hw
security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
index 833193b..b9d40be 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c
@@ -57,8 +57,8 @@ void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct
rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n",
+ pled->ledpin);
break;
}
pled->ledon = true;
@@ -92,8 +91,7 @@ void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct
rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_info("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
index d1b6a8f..4b67358 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c
@@ -297,10 +297,10 @@ bool rtl92c_phy_config_rf_with_headerfile(struct
ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_info("Incorrect rfpath %#x\n", rfpath);
break;
default:
+ pr_info("switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -340,8 +340,7 @@ void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw
*hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_info("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -365,8 +364,8 @@ void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw
*hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n",
+ rtlphy->current_chan_bw);
break;
}
rtl92ce_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -546,8 +544,8 @@ static bool _rtl92ce_phy_set_rf_power_state(struct
ieee80211_hw *hw,
break;
}
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("switch case %#x not processed\n",
+ rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
index 7cae635..e68ed7f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c
@@ -51,8 +51,7 @@ void rtl92ce_phy_rf6052_set_bandwidth(struct ieee80211_hw
*hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
index 691ddef..9bd2bff6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
@@ -158,8 +158,7 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw\n");
+ pr_err("Can't alloc buffer for fw\n");
return 1;
}
@@ -173,8 +172,7 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
@@ -249,7 +247,7 @@ static struct rtl_mod_params rtl92ce_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = DBG_EMERG,
+ .debug = 0,
};
static const struct rtl_hal_cfg rtl92ce_hal_cfg = {
--
2.10.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
