On Sun, Mar 12, 2017 at 06:40:52PM +0530, simran singhal wrote:
> The IIO subsystem is redefining iio_dev->mlock to be used by
> the IIO core only for protecting device operating mode changes.
> ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
>
> In this driver, mlock was being used to protect hardware state
> changes. Replace it with a lock in the devices global data.
>
> Signed-off-by: simran singhal <singhalsimr...@gmail.com>
Hi Simran,
These are now IIO tasks for this round of Outreachy. Please
follow the directions on the IIO task page w.r.t. claiming,
sending, and all.
Thanks,
alisons
> ---
> drivers/staging/iio/gyro/adis16060_core.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/iio/gyro/adis16060_core.c
> b/drivers/staging/iio/gyro/adis16060_core.c
> index c9d46e7..90a3a18 100644
> --- a/drivers/staging/iio/gyro/adis16060_core.c
> +++ b/drivers/staging/iio/gyro/adis16060_core.c
> @@ -29,11 +29,13 @@
> * @us_r: actual spi_device to read back data
> * @buf: transmit or receive buffer
> * @buf_lock: mutex to protect tx and rx
> + * @lock: protect sensor state
> **/
> struct adis16060_state {
> struct spi_device *us_w;
> struct spi_device *us_r;
> struct mutex buf_lock;
> + struct mutex lock; /* protect sensor state */
>
> u8 buf[3] ____cacheline_aligned;
> };
> @@ -87,7 +89,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> /* Take the iio_dev status lock */
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
> ret = adis16060_spi_write(indio_dev, chan->address);
> if (ret < 0)
> goto out_unlock;
> @@ -96,7 +98,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> goto out_unlock;
>
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
> *val = tval;
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_OFFSET:
> @@ -112,7 +114,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> return -EINVAL;
>
> out_unlock:
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
> return ret;
> }
>
> --
> 2.7.4
>
> --
> You received this message because you are subscribed to the Google Groups
> "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to outreachy-kernel+unsubscr...@googlegroups.com.
> To post to this group, send email to outreachy-ker...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/outreachy-kernel/20170312131052.GA21816%40singhal-Inspiron-5558.
> For more options, visit https://groups.google.com/d/optout.
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
