On Mon, 13 Mar 2017, Arushi Singhal wrote:

> New variables are added to make the code more readable.
>
> Signed-off-by: Arushi Singhal <arushisinghal19971...@gmail.com>
> ---
>  changes in v2
>  - removed the error.
>
>  drivers/staging/sm750fb/ddk750_mode.c | 103 
> ++++++++++++++++------------------
>  1 file changed, 49 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/ddk750_mode.c 
> b/drivers/staging/sm750fb/ddk750_mode.c
> index 25da678179f7..6dd52b450367 100644
> --- a/drivers/staging/sm750fb/ddk750_mode.c
> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> @@ -77,37 +77,34 @@ static int programModeRegisters(struct _mode_parameter_t 
> *pModeParam, struct pll
>       int ret = 0;
>       int cnt = 0;
>       unsigned int tmp, reg;
> +     unsigned int cht = CRT_HORIZONTAL_TOTAL;
> +     unsigned int cvt = CRT_VERTICAL_TOTAL;
> +     unsigned int chs = CRT_HORIZONTAL_SYNC;
> +     unsigned int cvs = CRT_VERTICAL_SYNC;
> +     unsigned int chssm = CRT_HORIZONTAL_SYNC_START_MASK;
> +     unsigned int cvssm = CRT_VERTICAL_SYNC_START_MASK;
> +     unsigned int chtdem = CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> +     unsigned int cvtdem = CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
> +     unsigned int chttm = CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
> +     unsigned int cvttm = CRT_VERTICAL_TOTAL_TOTAL_MASK;
> +     unsigned int chswm = CRT_HORIZONTAL_SYNC_WIDTH_MASK;
> +     unsigned int cvshm = CRT_VERTICAL_SYNC_HEIGHT_MASK;
> +     unsigned int phde = pModeParam->horizontal_display_end - 1;
> +     unsigned int pvde = pModeParam->vertical_display_end - 1;
> +     unsigned int phss = pModeParam->horizontal_sync_start - 1;
> +     unsigned int pvss = pModeParam->vertical_sync_start - 1;

I dont think this is a good solution.  The new names are not very
memorable, and they are not used near their definition.  You could instead
name a subexpression, and put the initialization right next to where the
variable would be used.  So for a trivial example, you could turn

x = (a + b) * c;

into

tmp = a * b;
x = tmp * c;

What you have in the definition of tmp should do some computation but
be able to be laid out in a readable manner.

julia

>
>       if (pll->clockType == SECONDARY_PLL) {
>               /* programe secondary pixel clock */
>               poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
> -             poke32(CRT_HORIZONTAL_TOTAL,
> -                    (((pModeParam->horizontal_total - 1) <<
> -                      CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> -                     CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
> -                    ((pModeParam->horizontal_display_end - 1) &
> -                     CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
> -
> -             poke32(CRT_HORIZONTAL_SYNC,
> -                    ((pModeParam->horizontal_sync_width <<
> -                      CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> -                     CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
> -                    ((pModeParam->horizontal_sync_start - 1) &
> -                     CRT_HORIZONTAL_SYNC_START_MASK));
> -
> -             poke32(CRT_VERTICAL_TOTAL,
> -                    (((pModeParam->vertical_total - 1) <<
> -                      CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
> -                     CRT_VERTICAL_TOTAL_TOTAL_MASK) |
> -                    ((pModeParam->vertical_display_end - 1) &
> -                     CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
> -
> -             poke32(CRT_VERTICAL_SYNC,
> -                    ((pModeParam->vertical_sync_height <<
> -                      CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
> -                     CRT_VERTICAL_SYNC_HEIGHT_MASK) |
> -                    ((pModeParam->vertical_sync_start - 1) &
> -                     CRT_VERTICAL_SYNC_START_MASK));
> +
> +             poke32(cht, (((pModeParam->horizontal_total - 1) << 
> CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) & chttm) | (phde & chtdem));
> +
> +             poke32(chs, ((pModeParam->horizontal_sync_width << 
> CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) & chswm) | (phss & chssm));
> +
> +             poke32(cvt, (((pModeParam->vertical_total - 1) << 
> CRT_VERTICAL_TOTAL_TOTAL_SHIFT) & cvttm) | (pvde & cvtdem));
> +
> +             poke32(cvs, ((pModeParam->vertical_sync_height << 
> CRT_VERTICAL_SYNC_HEIGHT_SHIFT) & cvshm) | (pvss & cvssm));
>
>               tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
>               if (pModeParam->vertical_sync_polarity)
> @@ -128,36 +125,34 @@ static int programModeRegisters(struct 
> _mode_parameter_t *pModeParam, struct pll
>
>       } else if (pll->clockType == PRIMARY_PLL) {
>               unsigned int reserved;
> +             unsigned int pht = PANEL_HORIZONTAL_TOTAL;
> +             unsigned int pvt = PANEL_VERTICAL_TOTAL;
> +             unsigned int phs = PANEL_HORIZONTAL_SYNC;
> +             unsigned int pvs = PANEL_VERTICAL_SYNC;
> +             unsigned int phssm = PANEL_HORIZONTAL_SYNC_START_MASK;
> +             unsigned int pvssm = PANEL_VERTICAL_SYNC_START_MASK;
> +             unsigned int phtdem = PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> +             unsigned int pvtdem = PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK;
> +             unsigned int phttm = PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
> +             unsigned int pvttm = PANEL_VERTICAL_TOTAL_TOTAL_MASK;
> +             unsigned int phswm = PANEL_HORIZONTAL_SYNC_WIDTH_MASK;
> +             unsigned int pvshm = PANEL_VERTICAL_SYNC_HEIGHT_MASK;
> +             unsigned int phde = pModeParam->horizontal_display_end - 1;
> +             unsigned int pvde = pModeParam->vertical_display_end - 1;
> +             unsigned int phss = pModeParam->horizontal_sync_start - 1;
> +             unsigned int pvss = pModeParam->vertical_sync_start - 1;
>
>               poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
>
> -             reg = ((pModeParam->horizontal_total - 1) <<
> -                     PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> -                     PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
> -             reg |= ((pModeParam->horizontal_display_end - 1) &
> -                     PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
> -             poke32(PANEL_HORIZONTAL_TOTAL, reg);
> -
> -             poke32(PANEL_HORIZONTAL_SYNC,
> -                    ((pModeParam->horizontal_sync_width <<
> -                      PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> -                     PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
> -                    ((pModeParam->horizontal_sync_start - 1) &
> -                     PANEL_HORIZONTAL_SYNC_START_MASK));
> -
> -             poke32(PANEL_VERTICAL_TOTAL,
> -                    (((pModeParam->vertical_total - 1) <<
> -                      PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
> -                     PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
> -                    ((pModeParam->vertical_display_end - 1) &
> -                     PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
> -
> -             poke32(PANEL_VERTICAL_SYNC,
> -                    ((pModeParam->vertical_sync_height <<
> -                      PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
> -                     PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
> -                    ((pModeParam->vertical_sync_start - 1) &
> -                     PANEL_VERTICAL_SYNC_START_MASK));
> +             reg = ((pModeParam->horizontal_total - 1) << 
> PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) & phttm;
> +             reg |= (phde & phtdem);
> +             poke32(pht, reg);
> +
> +             poke32(phs, ((pModeParam->horizontal_sync_width << 
> PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) & phswm) | (phss & phssm));
> +
> +             poke32(pvt, (((pModeParam->vertical_total - 1) << 
> PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) & pvttm) | (pvde & pvtdem));
> +
> +             poke32(pvs, ((pModeParam->vertical_sync_height << 
> PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) & pvshm) | (pvss & pvssm));
>
>               tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
>               if (pModeParam->vertical_sync_polarity)
> --
> 2.11.0
>
> --
> You received this message because you are subscribed to the Google Groups 
> "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to outreachy-kernel+unsubscr...@googlegroups.com.
> To post to this group, send email to outreachy-ker...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/outreachy-kernel/20170313182652.GA19882%40arushi-HP-Pavilion-Notebook.
> For more options, visit https://groups.google.com/d/optout.
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to