The IIO subsystem is redefining iio_dev->mlock to be used by
the IIO core only for protecting device operating mode changes.
ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
In this driver, mlock was being used to protect hardware state
changes. Replace it with a lock in the devices global data.
Signed-off-by: Arushi Singhal <arushisinghal19971...@gmail.com>
---
changes in v3
- Add mutex_init.
- correct the Documentation.
drivers/staging/iio/adc/ad7606.c | 9 +++++----
drivers/staging/iio/adc/ad7606.h | 3 +++
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7606.c b/drivers/staging/iio/adc/ad7606.c
index 9dbfa64b1e53..18f5f139117e 100644
--- a/drivers/staging/iio/adc/ad7606.c
+++ b/drivers/staging/iio/adc/ad7606.c
@@ -208,7 +208,7 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_SCALE:
ret = -EINVAL;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
if (val2 == scale_avail[i][1]) {
gpiod_set_value(st->gpio_range, i);
@@ -217,7 +217,7 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
ret = 0;
break;
}
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return ret;
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
@@ -231,11 +231,11 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
values[1] = (ret >> 1) & 1;
values[2] = (ret >> 2) & 1;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
values);
st->oversampling = val;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return 0;
default:
@@ -413,6 +413,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem
*base_address,
st = iio_priv(indio_dev);
st->dev = dev;
+ mutex_init(&st->lock);
st->bops = bops;
st->base_address = base_address;
/* tied to logic low, analog input range is +/- 5V */
diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h
index 746f9553d2ba..acaed8d5379c 100644
--- a/drivers/staging/iio/adc/ad7606.h
+++ b/drivers/staging/iio/adc/ad7606.h
@@ -14,6 +14,7 @@
* @name: identification string for chip
* @channels: channel specification
* @num_channels: number of channels
+ * @lock protect sensor state
*/
struct ad7606_chip_info {
@@ -23,6 +24,7 @@ struct ad7606_chip_info {
/**
* struct ad7606_state - driver instance specific data
+ * @lock protect sensor state
*/
struct ad7606_state {
@@ -37,6 +39,7 @@ struct ad7606_state {
bool done;
void __iomem *base_address;
+ struct mutex lock; /* protect sensor state */
struct gpio_desc *gpio_convst;
struct gpio_desc *gpio_reset;
struct gpio_desc *gpio_range;
--
2.11.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
