On Thu, Jul 13, 2017 at 5:46 AM, Vitaly Kuznetsov <vkuzn...@redhat.com> wrote: > Andy Lutomirski <l...@kernel.org> writes: > >> On Tue, May 23, 2017 at 5:36 AM, Vitaly Kuznetsov <vkuzn...@redhat.com> >> wrote: >>> Andy Lutomirski <l...@kernel.org> writes: >>> >>>> >>>> Also, can you share the benchmark you used for these patches? >>> >>> I didn't do much while writing the patchset, mostly I was running the >>> attached dumb trasher (32 pthreads doing mmap/munmap). On a 16 vCPU >>> Hyper-V 2016 guest I get the following (just re-did the test with >>> 4.12-rc1): >>> >>> Before the patchset: >>> # time ./pthread_mmap ./randfile >>> >>> real 3m33.118s >>> user 0m3.698s >>> sys 3m16.624s >>> >>> After the patchset: >>> # time ./pthread_mmap ./randfile >>> >>> real 2m19.920s >>> user 0m2.662s >>> sys 2m9.948s >>> >>> K. Y.'s guys at Microsoft did additional testing for the patchset on >>> different Hyper-V deployments including Azure, they may share their >>> findings too. >> >> I ran this benchmark on my big TLB patchset, mainly to make sure I >> didn't regress your test. I seem to have sped it up by 30% or so >> instead. I need to study this a little bit to figure out why to make >> sure that the reason isn't that I'm failing to do flushes I need to >> do. > > Got back to this and tested everything on WS2016 Hyper-V guest (24 > vCPUs) with my slightly modified benchmark. The numbers are: > > 1) pre-patch: > > real 1m15.775s > user 0m0.850s > sys 1m31.515s > > 2) your 'x86/pcid' series (PCID feature is not passed to the guest so this > is mainly your lazy tlb optimization): > > real 0m55.135s > user 0m1.168s > sys 1m3.810s > > 3) My 'pv tlb shootdown' patchset on top of your 'x86/pcid' series: > > real 0m48.891s > user 0m1.052s > sys 0m52.591s > > As far as I understand I need to add > 'setup_clear_cpu_cap(X86_FEATURE_PCID)' to my series to make things work > properly if this feature appears in the guest. > > Other than that there is an additional room for optimization: > tlb_single_page_flush_ceiling, I'm not sure that with Hyper-V's PV the > default value of 33 is optimal. But the investigation can be done > separately. > > AFAIU with your TLB preparatory work which got into 4.13 our series > become untangled and can go through different trees. I'll rebase mine > and send it to K. Y. to push through Greg's char-misc tree. > > Is there anything blocking your PCID series from going into 4.14? It > seems to big a huge improvement for some workloads.
No. All but one patch should land in 4.13. It would also be nifty if someone were to augment by work to allow one CPU to tell another CPU that it just flushed on that CPU's behalf. Basically, a property atomic and/or locked operation that finds a given ctx_id in the remote cpu's cpu_tlbstate and, if tlb_gen <= x, sets tlb_gen to x. Some read operations might be useful, too. This *might* be doable with cmpxchg16b, but spinlocks would be easier. The idea would be for paravirt remote flushes to be able to see, for real, which remote CPUs need flushes, do the flushes, and then update the remote tlb_gen to record that they've been done. FWIW, I read the HV TLB docs, and it's entirely unclear to me how it interacts with PCID or whether PCID is supported at all. It would be real nice to get PCID *and* paravirt flush on the major hypervisor platforms. --Andy _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
