This patch fixes the following checkpatch.pl error:

ERROR: that open brace { should be on the previous line

in rf69.c file as requested by TODO file.

Note:
ERROR: else should follow close brace '}'
remains valid here and is going to be fixed by the next patch in set.

Additionally some style warnings remain valid here and could be fixed by
another patch.

Signed-off-by: Marcin Ciupak <marcin.s.ciu...@gmail.com>
---
 drivers/staging/pi433/rf69.c | 33 +++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/pi433/rf69.c b/drivers/staging/pi433/rf69.c
index f83523e3395d..3afd217b79a7 100644
--- a/drivers/staging/pi433/rf69.c
+++ b/drivers/staging/pi433/rf69.c
@@ -101,8 +101,7 @@ enum modulation rf69_get_modulation(struct spi_device *spi)
 
        currentValue = READ_REG(REG_DATAMODUL);
 
-       switch (currentValue & MASK_DATAMODUL_MODULATION_TYPE >> 3)  // TODO 
improvement: change 3 to define
-       {
+       switch (currentValue & MASK_DATAMODUL_MODULATION_TYPE >> 3) { // TODO 
improvement: change 3 to define
        case DATAMODUL_MODULATION_TYPE_OOK: return OOK;
        case DATAMODUL_MODULATION_TYPE_FSK: return FSK;
        default:                            return undefined;
@@ -115,8 +114,7 @@ int rf69_set_modulation_shaping(struct spi_device *spi, 
enum modShaping modShapi
                dev_dbg(&spi->dev, "set: mod shaping");
        #endif
 
-       if (rf69_get_modulation(spi) == FSK)
-       {
+       if (rf69_get_modulation(spi) == FSK) {
                switch (modShaping) {
                case shapingOff: return WRITE_REG(REG_DATAMODUL, 
(READ_REG(REG_DATAMODUL) & ~MASK_DATAMODUL_MODULATION_SHAPE) | 
DATAMODUL_MODULATION_SHAPE_NONE);
                case shaping1_0: return WRITE_REG(REG_DATAMODUL, 
(READ_REG(REG_DATAMODUL) & ~MASK_DATAMODUL_MODULATION_SHAPE) | 
DATAMODUL_MODULATION_SHAPE_1_0);
@@ -125,8 +123,7 @@ int rf69_set_modulation_shaping(struct spi_device *spi, 
enum modShaping modShapi
                default:         INVALID_PARAM;
                }
        }
-       else
-       {
+       else {
                switch (modShaping) {
                case shapingOff: return WRITE_REG(REG_DATAMODUL, 
(READ_REG(REG_DATAMODUL) & ~MASK_DATAMODUL_MODULATION_SHAPE) | 
DATAMODUL_MODULATION_SHAPE_NONE);
                case shapingBR:  return WRITE_REG(REG_DATAMODUL, 
(READ_REG(REG_DATAMODUL) & ~MASK_DATAMODUL_MODULATION_SHAPE) | 
DATAMODUL_MODULATION_SHAPE_BR);
@@ -150,8 +147,7 @@ int rf69_set_bit_rate(struct spi_device *spi, u16 bitRate)
 
        // check input value
        bitRate_min = F_OSC / 8388608; // 8388608 = 2^23;
-       if (bitRate < bitRate_min)
-       {
+       if (bitRate < bitRate_min) {
                dev_dbg(&spi->dev, "setBitRate: illegal input param");
                INVALID_PARAM;
        }
@@ -185,8 +181,7 @@ int rf69_set_deviation(struct spi_device *spi, u32 
deviation)
                dev_dbg(&spi->dev, "set: deviation");
        #endif
 
-       if (deviation < 600 || deviation > 500000) //TODO: Abh�ngigkeit von 
Bitrate beachten!!
-       {
+       if (deviation < 600 || deviation > 500000) { //TODO: Abh�ngigkeit von 
Bitrate beachten!!
                dev_dbg(&spi->dev, "set_deviation: illegal input param");
                INVALID_PARAM;
        }
@@ -203,8 +198,7 @@ int rf69_set_deviation(struct spi_device *spi, u32 
deviation)
        lsb = (f_reg&0xff);
 
        // check msb
-       if (msb & !FDEVMASB_MASK)
-       {
+       if (msb & !FDEVMASB_MASK) {
                dev_dbg(&spi->dev, "set_deviation: err in calc of msb");
                INVALID_PARAM;
        }
@@ -239,8 +233,7 @@ int rf69_set_frequency(struct spi_device *spi, u32 
frequency)
 
        // check input value
        f_max = div_u64(f_step * 8388608, factor);
-       if (frequency > f_max)
-       {
+       if (frequency > f_max) {
                dev_dbg(&spi->dev, "setFrequency: illegal input param");
                INVALID_PARAM;
        }
@@ -387,8 +380,7 @@ enum lnaGain rf69_get_lna_gain(struct spi_device *spi)
 
        currentValue = READ_REG(REG_LNA);
 
-       switch (currentValue & MASK_LNA_CURRENT_GAIN >> 3)  // improvement: 
change 3 to define
-       {
+       switch (currentValue & MASK_LNA_CURRENT_GAIN >> 3) { // improvement: 
change 3 to define
        case LNA_GAIN_AUTO:         return automatic;
        case LNA_GAIN_MAX:          return max;
        case LNA_GAIN_MAX_MINUS_6:  return maxMinus6;
@@ -488,8 +480,7 @@ int rf69_set_ook_threshold_type(struct spi_device *spi, 
enum thresholdType thres
                dev_dbg(&spi->dev, "set: threshold type");
        #endif
 
-       switch (thresholdType)
-       {
+       switch (thresholdType) {
        case fixed:     return WRITE_REG(REG_OOKPEAK, ( (READ_REG(REG_OOKPEAK) 
& ~MASK_OOKPEAK_THRESTYPE) | OOKPEAK_THRESHTYPE_FIXED) );
        case peak:      return WRITE_REG(REG_OOKPEAK, ( (READ_REG(REG_OOKPEAK) 
& ~MASK_OOKPEAK_THRESTYPE) | OOKPEAK_THRESHTYPE_PEAK) );
        case average:   return WRITE_REG(REG_OOKPEAK, ( (READ_REG(REG_OOKPEAK) 
& ~MASK_OOKPEAK_THRESTYPE) | OOKPEAK_THRESHTYPE_AVERAGE) );
@@ -875,8 +866,7 @@ int rf69_read_fifo (struct spi_device *spi, u8 *buffer, 
unsigned int size)
        u8 local_buffer[FIFO_SIZE + 1];
        int retval;
 
-       if (size > FIFO_SIZE)
-       {
+       if (size > FIFO_SIZE) {
                #ifdef DEBUG
                        dev_dbg(&spi->dev, "read fifo: passed in buffer bigger 
then internal buffer \n");
                #endif
@@ -910,8 +900,7 @@ int rf69_write_fifo(struct spi_device *spi, u8 *buffer, 
unsigned int size)
        char spi_address = REG_FIFO | WRITE_BIT;
        u8 local_buffer[FIFO_SIZE + 1];
 
-       if (size > FIFO_SIZE)
-       {
+       if (size > FIFO_SIZE) {
                #ifdef DEBUG
                        dev_dbg(&spi->dev, "read fifo: passed in buffer bigger 
then internal buffer \n");
                #endif
-- 
2.13.0

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to