On Tue, Sep 05, 2017 at 06:42:20PM +0200, Hans de Goede wrote: > Add mux support to the fusb302 driver, call devm_tcpc_gen_mux_create() > to let the generic tcpc_mux_dev code create a tcpc_mux_dev for us. > > Also document the mux-names used by the generic tcpc_mux_dev code in > our devicetree bindings. > > Cc: Rob Herring <robh...@kernel.org> > Cc: Mark Rutland <mark.rutl...@arm.com> > Cc: devicet...@vger.kernel.org > Signed-off-by: Hans de Goede <hdego...@redhat.com> > --- > Documentation/devicetree/bindings/usb/fcs,fusb302.txt | 3 +++ > drivers/staging/typec/fusb302/fusb302.c | 11 ++++++++++- > 2 files changed, 13 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt > b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt > index 472facfa5a71..63d639eadacd 100644 > --- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt > +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt > @@ -6,6 +6,9 @@ Required properties : > - interrupts : Interrupt specifier > > Optional properties : > +- mux-controls : List of mux-ctrl-specifiers containing 1 or 2 > muxes > +- mux-names : "type-c-mode-mux" when using 1 mux, or > + "type-c-mode-mux", "usb-role-mux" when using 2 > muxes
I'm not sure this is the right place for this. The mux is outside the FUSB302. In a type-C connector node or USB phy node would make more sense to me. > - fcs,max-sink-microvolt : Maximum voltage to negotiate when configured as > sink > - fcs,max-sink-microamp : Maximum current to negotiate when configured as > sink > - fcs,max-sink-microwatt : Maximum power to negotiate when configured as sink _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
