On Mon, Oct 16, 2017 at 10:18:14PM +0200, Julia Lawall wrote:
> This patch has the same subject line as the one I previously commented on
> (modulo the typo in that one).
>
Thanks Julia for your quick response. Before work on your suggestions I have a
question regarding the above comment:
Do you want that I merge this two patches to avoid two patches with the same
subject line? Or they are OK as two with the same subject line? I split the
changes into two patches to avoid big patches and the subject line come as the
same because I'm doing the same in each of them ;)
> On Mon, 16 Oct 2017, Frank A. Cancio Bello wrote:
>
> > checkpatch message: 'CHECK: Unnecessary parentheses around'.
>
> Again, say what and why you have done.
>
> julia
>
> > Signed-off-by: Frank A. Cancio Bello <fr...@generalsoftwareinc.com>
> > ---
> > FYI:
> > * I read 'Ignore checkpatch.pl if it complains about parens around
> > boolean expressions or ternary conditionals in return values, like this:
> > return ((depth > 1) ? (depth - 1) : depth);'. All the fixes in this patch
> > are not in 'return values', so I hope there are OK ;)
> >
> > drivers/staging/wlan-ng/cfg80211.c | 10 +++++-----
> > drivers/staging/wlan-ng/hfa384x_usb.c | 18 +++++++++---------
> > drivers/staging/wlan-ng/p80211conv.c | 6 +++---
> > drivers/staging/wlan-ng/p80211netdev.c | 4 ++--
> > 4 files changed, 19 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/staging/wlan-ng/cfg80211.c
> > b/drivers/staging/wlan-ng/cfg80211.c
> > index 178f6f5..03279aa 100644
> > --- a/drivers/staging/wlan-ng/cfg80211.c
> > +++ b/drivers/staging/wlan-ng/cfg80211.c
> > @@ -265,7 +265,7 @@ static int prism2_get_station(struct wiphy *wiphy,
> > struct net_device *dev,
> >
> > memset(sinfo, 0, sizeof(*sinfo));
> >
> > - if (!wlandev || (wlandev->msdstate != WLAN_MSD_RUNNING))
> > + if (!wlandev || wlandev->msdstate != WLAN_MSD_RUNNING)
> > return -EOPNOTSUPP;
> >
> > /* build request message */
> > @@ -367,8 +367,8 @@ static int prism2_scan(struct wiphy *wiphy,
> > msg2.bssindex.data = i;
> >
> > result = p80211req_dorequest(wlandev, (u8 *)&msg2);
> > - if ((result != 0) ||
> > - (msg2.resultcode.data != P80211ENUM_resultcode_success)) {
> > + if (result != 0 ||
> > + msg2.resultcode.data != P80211ENUM_resultcode_success) {
> > break;
> > }
> >
> > @@ -475,8 +475,8 @@ static int prism2_connect(struct wiphy *wiphy, struct
> > net_device *dev,
> > }
> >
> > /* Set the authorization */
> > - if ((sme->auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM) ||
> > - ((sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) && !is_wep))
> > + if (sme->auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM ||
> > + sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC && !is_wep)
> > msg_join.authtype.data = P80211ENUM_authalg_opensystem;
> > else if ((sme->auth_type == NL80211_AUTHTYPE_SHARED_KEY) ||
> > ((sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) && is_wep))
> > diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c
> > b/drivers/staging/wlan-ng/hfa384x_usb.c
> > index d1e8218..b5fdfd8 100644
> > --- a/drivers/staging/wlan-ng/hfa384x_usb.c
> > +++ b/drivers/staging/wlan-ng/hfa384x_usb.c
> > @@ -1781,9 +1781,9 @@ int hfa384x_drvr_enable(struct hfa384x *hw, u16
> > macport)
> > {
> > int result = 0;
> >
> > - if ((!hw->isap && macport != 0) ||
> > - (hw->isap && !(macport <= HFA384x_PORTID_MAX)) ||
> > - (hw->port_enabled[macport])) {
> > + if (!hw->isap && macport != 0 ||
> > + hw->isap && !(macport <= HFA384x_PORTID_MAX) ||
> > + hw->port_enabled[macport]) {
> > result = -EINVAL;
> > } else {
> > result = hfa384x_cmd_enable(hw, macport);
> > @@ -2465,7 +2465,7 @@ int hfa384x_drvr_start(struct hfa384x *hw)
> > netdev_err(hw->wlandev->netdev, "Cannot get bulk in endpoint
> > status.\n");
> > goto done;
> > }
> > - if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_in))
> > + if (status == 1 && usb_clear_halt(hw->usb, hw->endp_in))
> > netdev_err(hw->wlandev->netdev, "Failed to reset bulk in
> > endpoint.\n");
> >
> > result =
> > @@ -2474,7 +2474,7 @@ int hfa384x_drvr_start(struct hfa384x *hw)
> > netdev_err(hw->wlandev->netdev, "Cannot get bulk out endpoint
> > status.\n");
> > goto done;
> > }
> > - if ((status == 1) && usb_clear_halt(hw->usb, hw->endp_out))
> > + if (status == 1 && usb_clear_halt(hw->usb, hw->endp_out))
> > netdev_err(hw->wlandev->netdev, "Failed to reset bulk out
> > endpoint.\n");
> >
> > /* Synchronous unlink, in case we're trying to restart the driver */
> > @@ -3054,7 +3054,7 @@ static void hfa384x_usbin_callback(struct urb *urb)
> > goto exit;
> >
> > skb = hw->rx_urb_skb;
> > - if (!skb || (skb->data != urb->transfer_buffer)) {
> > + if (!skb || skb->data != urb->transfer_buffer) {
> > WARN_ON(1);
> > return;
> > }
> > @@ -3501,8 +3501,8 @@ static void hfa384x_int_rxmonitor(struct wlandevice
> > *wlandev,
> > return;
> >
> > /* only prepend the prism header if in the right mode */
> > - if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
> > - (hw->sniffhdr != 0)) {
> > + if (wlandev->netdev->type == ARPHRD_IEEE80211_PRISM &&
> > + hw->sniffhdr != 0) {
> > struct p80211_caphdr *caphdr;
> > /* The NEW header format! */
> > datap = skb_put(skb, sizeof(struct p80211_caphdr));
> > @@ -3772,7 +3772,7 @@ static void hfa384x_ctlxout_callback(struct urb *urb)
> >
> > spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
> >
> > - if (!timer_ok && (hw->resp_timer_done == 0)) {
> > + if (!timer_ok && hw->resp_timer_done == 0) {
> > spin_lock_irqsave(&hw->ctlxq.lock, flags);
> > goto delresp;
> > }
> > diff --git a/drivers/staging/wlan-ng/p80211conv.c
> > b/drivers/staging/wlan-ng/p80211conv.c
> > index c1b6d42..bc63eb2 100644
> > --- a/drivers/staging/wlan-ng/p80211conv.c
> > +++ b/drivers/staging/wlan-ng/p80211conv.c
> > @@ -356,10 +356,10 @@ int skb_p80211_to_ether(struct wlandevice *wlandev,
> > u32 ethconv,
> > sizeof(struct wlan_llc));
> >
> > /* Test for the various encodings */
> > - if ((payload_length >= sizeof(struct wlan_ethhdr)) &&
> > + if (payload_length >= sizeof(struct wlan_ethhdr) &&
> > (e_llc->dsap != 0xaa || e_llc->ssap != 0xaa) &&
> > - ((!ether_addr_equal_unaligned(daddr, e_hdr->daddr)) ||
> > - (!ether_addr_equal_unaligned(saddr, e_hdr->saddr)))) {
> > + (!ether_addr_equal_unaligned(daddr, e_hdr->daddr) ||
> > + !ether_addr_equal_unaligned(saddr, e_hdr->saddr))) {
> > pr_debug("802.3 ENCAP len: %d\n", payload_length);
> > /* 802.3 Encapsulated */
> > /* Test for an overlength frame */
> > diff --git a/drivers/staging/wlan-ng/p80211netdev.c
> > b/drivers/staging/wlan-ng/p80211netdev.c
> > index 0f50365..ad11a3f 100644
> > --- a/drivers/staging/wlan-ng/p80211netdev.c
> > +++ b/drivers/staging/wlan-ng/p80211netdev.c
> > @@ -427,7 +427,7 @@ static int p80211knetdev_hard_start_xmit(struct sk_buff
> > *skb,
> >
> > failed:
> > /* Free up the WEP buffer if it's not the same as the skb */
> > - if ((p80211_wep.data) && (p80211_wep.data != skb->data))
> > + if (p80211_wep.data && p80211_wep.data != skb->data)
> > kzfree(p80211_wep.data);
> >
> > /* we always free the skb here, never in a lower level. */
> > @@ -491,7 +491,7 @@ static int p80211netdev_ethtool(struct wlandevice
> > *wlandev,
> > edata.cmd = ethcmd;
> >
> > if (wlandev->linkstatus &&
> > - (wlandev->macmode != WLAN_MACMODE_NONE)) {
> > + wlandev->macmode != WLAN_MACMODE_NONE) {
> > edata.data = 1;
> > } else {
> > edata.data = 0;
> > --
> > 2.7.4
> >
> > --
> > You received this message because you are subscribed to the Google Groups
> > "outreachy-kernel" group.
> > To unsubscribe from this group and stop receiving emails from it, send an
> > email to outreachy-kernel+unsubscr...@googlegroups.com.
> > To post to this group, send email to outreachy-ker...@googlegroups.com.
> > To view this discussion on the web visit
> > https://groups.google.com/d/msgid/outreachy-kernel/20171016182614.GA3341%40ubuntu-server-1604.
> > For more options, visit https://groups.google.com/d/optout.
> >
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
