Add binding documentation for the Video Decoder Engine which is found
on NVIDIA Tegra20/30/114/124/132 SoC's.

Signed-off-by: Dmitry Osipenko <dig...@gmail.com>
---
 .../devicetree/bindings/media/nvidia,tegra-vde.txt | 55 ++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt

diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt 
b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
new file mode 100644
index 000000000000..470237ed6fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
@@ -0,0 +1,55 @@
+NVIDIA Tegra Video Decoder Engine
+
+Required properties:
+- compatible : Must contain one of the following values:
+   - "nvidia,tegra20-vde"
+   - "nvidia,tegra30-vde"
+   - "nvidia,tegra114-vde"
+   - "nvidia,tegra124-vde"
+   - "nvidia,tegra132-vde"
+- reg : Must contain an entry for each entry in reg-names.
+- reg-names : Must include the following entries:
+  - sxe
+  - bsev
+  - mbe
+  - ppe
+  - mce
+  - tfe
+  - ppb
+  - vdma
+  - frameid
+- iram : Must contain phandle to the mmio-sram device node that represents
+         IRAM region used by VDE.
+- interrupts : Must contain an entry for each entry in interrupt-names.
+- interrupt-names : Must include the following entries:
+  - sync-token
+  - bsev
+  - sxe
+- clocks : Must include the following entries:
+  - vde
+- resets : Must include the following entries:
+  - vde
+
+Example:
+
+video-codec@6001a000 {
+       compatible = "nvidia,tegra20-vde";
+       reg = <0x6001a000 0x1000 /* Syntax Engine */
+              0x6001b000 0x1000 /* Video Bitstream Engine */
+              0x6001c000  0x100 /* Macroblock Engine */
+              0x6001c200  0x100 /* Post-processing Engine */
+              0x6001c400  0x100 /* Motion Compensation Engine */
+              0x6001c600  0x100 /* Transform Engine */
+              0x6001c800  0x100 /* Pixel prediction block */
+              0x6001ca00  0x100 /* Video DMA */
+              0x6001d800  0x300 /* Video frame controls */>;
+       reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+                   "tfe", "ppb", "vdma", "frameid";
+       iram = <&vde_pool>; /* IRAM region */
+       interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt 
*/
+                    <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+                    <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+       interrupt-names = "sync-token", "bsev", "sxe";
+       clocks = <&tegra_car TEGRA20_CLK_VDE>;
+       resets = <&tegra_car 61>;
+};
-- 
2.14.2

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to