On Sun, 18 Mar 2018 14:35:46 +0100
David Veenstra <davidjulianveens...@gmail.com> wrote:
> Add variable to hold &spi->dev in ad2s1200_probe. This value is repeatedly
> used in ad2s1200_probe.
>
> Signed-off-by: David Veenstra <davidjulianveens...@gmail.com>
I'm a little unconvinced by this one. It adds code to save
a really very trivial bit of repetition. If it had been
via another pointer or this would have made a big difference
in number of lines by bringing a lot of entries below 80 chars
that weren't previous, then there would be a good argument.
Here, not so much.
Jonathan
> ---
> drivers/staging/iio/resolver/ad2s1200.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/staging/iio/resolver/ad2s1200.c
> b/drivers/staging/iio/resolver/ad2s1200.c
> index 00efba598671..eceb86e952de 100644
> --- a/drivers/staging/iio/resolver/ad2s1200.c
> +++ b/drivers/staging/iio/resolver/ad2s1200.c
> @@ -118,19 +118,22 @@ static int ad2s1200_probe(struct spi_device *spi)
> unsigned short *pins = spi->dev.platform_data;
> struct ad2s1200_state *st;
> struct iio_dev *indio_dev;
> + struct device *dev;
> int pn, ret = 0;
>
> + dev = &spi->dev;
> +
> for (pn = 0; pn < AD2S1200_PN; pn++) {
> - ret = devm_gpio_request_one(&spi->dev, pins[pn], GPIOF_DIR_OUT,
> + ret = devm_gpio_request_one(dev, pins[pn], GPIOF_DIR_OUT,
> DRV_NAME);
> if (ret) {
> - dev_err(&spi->dev, "request gpio pin %d failed\n",
> + dev_err(dev, "request gpio pin %d failed\n",
> pins[pn]);
> return ret;
> }
> }
>
> - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> if (!indio_dev)
> return -ENOMEM;
>
> @@ -141,14 +144,14 @@ static int ad2s1200_probe(struct spi_device *spi)
> st->sample = pins[0];
> st->rdvel = pins[1];
>
> - indio_dev->dev.parent = &spi->dev;
> + indio_dev->dev.parent = dev;
> indio_dev->info = &ad2s1200_info;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->channels = ad2s1200_channels;
> indio_dev->num_channels = ARRAY_SIZE(ad2s1200_channels);
> indio_dev->name = spi_get_device_id(spi)->name;
>
> - ret = devm_iio_device_register(&spi->dev, indio_dev);
> + ret = devm_iio_device_register(dev, indio_dev);
> if (ret)
> return ret;
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
