On Mon, Apr 16, 2018 at 6:54 AM, Jun Li <jun...@nxp.com> wrote:
> Hi
>> -----Original Message-----
>> From: Rob Herring [mailto:r...@kernel.org]
>> Sent: 2018年4月10日 4:04
>> To: Jun Li <jun...@nxp.com>
>> Cc: gre...@linuxfoundation.org; heikki.kroge...@linux.intel.com;
>> li...@roeck-us.net; a.ha...@samsung.com; shufan_...@richtek.com; Peter
>> Chen <peter.c...@nxp.com>; devicet...@vger.kernel.org;
>> linux-...@vger.kernel.org; dl-linux-imx <linux-...@nxp.com>;
>> de...@driverdev.osuosl.org
>> Subject: Re: [PATCH v4 02/13] dt-bindings: usb: add documentation for typec
>> port controller(TCPCI)
>>
>> On Thu, Mar 29, 2018 at 12:06:07AM +0800, Li Jun wrote:
[...]
>> > +ptn5110@50 {
>> > + compatible = "usb-tcpci,ptn5110";
>> > + reg = <0x50>;
>> > + interrupt-parent = <&gpio3>;
>> > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
>> > +
>> > + usb_con: connector {
>>
>> How is the OF graph done in this case? You need some link to the USB
>> controller.
>
> The platform(i.MX8MQ EVK) for this is still on the way of start upstream, I
> was
> Planning to add this part with enabling USB3 function, as of how this will be
> done,
> I only have usb3 ss data(no display port or Sideband), is something like
> below OK?
>
> typec: ptn5110@50 {
> compatible = "nxp,ptn5110";
> ...
>
> usb_con: connector {
> compatible = "usb-c-connector";
> label = "USB-C";
> ...
>
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> port@1 {
> reg = <1>;
> usb_con_ss: endpoint {
> remote-endpoint = <&usb3_phy_ss>;
> };
> };
> };
> };
> };
>
> &usb3_phy0 {
> status = "okay";
>
> port {
> usb3_phy_ss: endpoint {
Normally, the graph connection would be to the USB controller, not the
phy as the phy is just referred to with a "phys" property.
> remote-endpoint = <&usb_con_ss>;
> };
> };
> }
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
