Currently the code for the sdio irq is never used, because the flags
for it (MSDC_(EXT_)SDIO_IRQ) are never set. So the whole code for it
can be removed.

Signed-off-by: Christian Lütke-Stetzkamp <christ...@lkamp.de>
---
 drivers/staging/mt7621-mmc/board.h |  2 --
 drivers/staging/mt7621-mmc/sd.c    | 25 -------------------------
 2 files changed, 27 deletions(-)

diff --git a/drivers/staging/mt7621-mmc/board.h 
b/drivers/staging/mt7621-mmc/board.h
index 7e0c469a444d..a7d82f321b00 100644
--- a/drivers/staging/mt7621-mmc/board.h
+++ b/drivers/staging/mt7621-mmc/board.h
@@ -39,8 +39,6 @@
 #define MSDC_CD_PIN_EN      (1 << 0)  /* card detection pin is wired   */
 #define MSDC_WP_PIN_EN      (1 << 1)  /* write protection pin is wired */
 #define MSDC_RST_PIN_EN     (1 << 2)  /* emmc reset pin is wired       */
-#define MSDC_SDIO_IRQ       (1 << 3)  /* use internal sdio irq (bus)   */
-#define MSDC_EXT_SDIO_IRQ   (1 << 4)  /* use external sdio irq         */
 #define MSDC_REMOVABLE      (1 << 5)  /* removable slot                */
 
 #define MSDC_SMPL_RISING    (0)
diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
index 614e6a72a50a..7a6101e62891 100644
--- a/drivers/staging/mt7621-mmc/sd.c
+++ b/drivers/staging/mt7621-mmc/sd.c
@@ -1942,33 +1942,11 @@ static int msdc_ops_get_cd(struct mmc_host *mmc)
        return present;
 }
 
-/* ops.enable_sdio_irq */
-static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable)
-{
-       struct msdc_host *host = mmc_priv(mmc);
-       struct msdc_hw *hw = host->hw;
-       void __iomem *base = host->base;
-       u32 tmp;
-
-       if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */
-       } else {
-               ERR_MSG("XXX ");  /* so never enter here */
-               tmp = sdr_read32(SDC_CFG);
-               /* FIXME. Need to interrupt gap detection */
-               if (enable)
-                       tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
-               else
-                       tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
-               sdr_write32(SDC_CFG, tmp);
-       }
-}
-
 static struct mmc_host_ops mt_msdc_ops = {
        .request         = msdc_ops_request,
        .set_ios         = msdc_ops_set_ios,
        .get_ro          = msdc_ops_get_ro,
        .get_cd          = msdc_ops_get_cd,
-       .enable_sdio_irq = msdc_ops_enable_sdio_irq,
 };
 
 /*--------------------------------------------------------------------------*/
@@ -2330,9 +2308,6 @@ static int msdc_drv_probe(struct platform_device *pdev)
        //TODO: read this as bus-width from dt (via mmc_of_parse)
        mmc->caps  |= MMC_CAP_4_BIT_DATA;
 
-       if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
-               mmc->caps |= MMC_CAP_SDIO_IRQ;  /* yes for sdio */
-
        cd_active_low = !of_property_read_bool(pdev->dev.of_node, 
"mediatek,cd-high");
 
        if (of_property_read_bool(pdev->dev.of_node, "mediatek,cd-poll"))
-- 
2.16.1

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to