This fixes the following checkpatch error:
ERROR: trailing whitespace
Signed-off-by: Abdun Nihaal <abdun.nih...@gmail.com>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 32 ++++++++++++-------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c
b/drivers/staging/mt7621-pci/pci-mt7621.c
index 44f1a592a7a5..fbcee58445b3 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -498,7 +498,7 @@ set_phy_for_ssc(void)
printk("***** Xtal 40MHz *****\n");
} else { // 25MHz | 20MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),
6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for
host mode)
- if (reg >= 6) {
+ if (reg >= 6) {
printk("***** Xtal 25MHz *****\n");
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET +
0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock
select
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET +
0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO
PCW (for host mode)
@@ -510,15 +510,15 @@ set_phy_for_ssc(void)
}
}
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1,
0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2,
0x02); // RG_PE1_H_PLL_BC
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4,
0x06); // RG_PE1_H_PLL_BP
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4,
0x02); // RG_PE1_H_PLL_IR
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4,
0x01); // RG_PE1_H_PLL_IC
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3,
0x00); // RG_PE1_H_PLL_BR
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3,
0x02); // RG_PE1_PLL_DIVEN
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2,
0x02); // RG_PE1_H_PLL_BC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4,
0x06); // RG_PE1_H_PLL_BP
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4,
0x02); // RG_PE1_H_PLL_IR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4,
0x01); // RG_PE1_H_PLL_IC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3,
0x00); // RG_PE1_H_PLL_BR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3,
0x02); // RG_PE1_PLL_DIVEN
if(reg <= 5 && reg >= 3) { // 40MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),
6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv
when force mode enable
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),
5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of
da_pe1_mstckdiv
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),
5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of
da_pe1_mstckdiv
}
/* Enable PHY and disable force mode */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1,
0x01); // rg_pe1_phy_en //Port 0 enable
@@ -546,15 +546,15 @@ set_phy_for_ssc(void)
}
}
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1,
0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2,
0x02); // RG_PE1_H_PLL_BC
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4,
0x06); // RG_PE1_H_PLL_BP
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4,
0x02); // RG_PE1_H_PLL_IR
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4,
0x01); // RG_PE1_H_PLL_IC
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3,
0x00); // RG_PE1_H_PLL_BR
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3,
0x02); // RG_PE1_PLL_DIVEN
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2,
0x02); // RG_PE1_H_PLL_BC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4,
0x06); // RG_PE1_H_PLL_BP
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4,
0x02); // RG_PE1_H_PLL_IR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4,
0x01); // RG_PE1_H_PLL_IC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3,
0x00); // RG_PE1_H_PLL_BR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3,
0x02); // RG_PE1_PLL_DIVEN
if(reg <= 5 && reg >= 3) { // 40MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6,
2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when
force mode enable
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5,
1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of
da_pe1_mstckdiv
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5,
1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of
da_pe1_mstckdiv
}
/* Enable PHY and disable force mode */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1,
0x01); // rg_pe1_phy_en //Port 0 enable
@@ -650,7 +650,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
RALINK_PCIE_CLK_GEN |= 0x80000000;
mdelay(50);
RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
-
+
#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
*(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;
// set DATA
--
2.17.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
